MadgeTech ThermoVault Max Fiche technique

ThermoVault Max

Extreme Temperature Thermal Barrier

PRODUCT

USER GUIDE

To view the full MadgeTech product line,

visit our website at madgetech.com.

Product User Guide | 2

ThermoVault Max

PRODUCT USER GUIDE

Product Overview

The ThermoVault Max is an extreme, high temperature

thermal barrier designed for use with the HiTemp140

series. This durable thermal barrier can withstand

temperatures up to +400 °C in dry heat applications and

+250 °C in wet applications when used with the TMAX Wet

Seal Kit (optional accessory).

Compatible Data Loggers

• HiTemp140-M12

• HiTemp140-FP

• HiTemp140-PT

Getting Started

Dry Applications

The HiTemp140-FP, HiTemp140-PT HiTemp140-M12 can

be used for dry applications up to +400 °C.

1. Unscrew the lid of the

thermal barrier.

3. If using the HiTemp140-M12

data logger, screw the

probe into the bottom end

of the barrier lid.

4. Slide the data logger and

lid back into the barrier

body and screw the lid

back on tightly.

2. Feed the probe of the data

logger through the bottom

end of the lid.

Product User Guide | 3

ThermoVault Max

PRODUCT USER GUIDE

Wet Applications

For use in wet applications, the TMAX Wet Seal Kit (sold separately, optional accessory) should be used with the

HiTemp140-FP, and HiTemp140-PT data logger. When used in wet applications the maximum operating environment

cannot exceed 250 °C (482 °F).

Installing the O-Ring: The O-Ring ensures a tight seal which prevents liquid from entering the inside of the barrier. O-Ring

maintenance is a key factor when properly caring for the ThermoVault Max. Please refer to the application note “O-Rings

101: Protecting Your Data Logger,” found on the MadgeTech website, for information on how to prevent O-Ring failure.

The TMAX Wet Seal Kit Includes:

• PTFE Thread Sealing Tape

• Fitting Body

• Dome Nut

• Compression Ferrules: PTFE (5), Stainless Steel (1)

• O-Ring

1. Unscrew the endcap of the

thermal barrier.

2. Stretch the O-Ring over the

endcap so it sits in the groove just

beneath the knurled shoulder.

Product User Guide | 4

ThermoVault Max

PRODUCT USER GUIDE

Securing the Compression Fitting: The compression fitting is used with the HiTemp140-FP and HiTemp140-PT data

loggers to ensure a water tight seal.

Compression Ferrule Note: The

stainless steel Ferrule provides the

most reliable seal, but becomes

permanent crimped onto the probe.

The PTFE Ferrule will become more

deformed with multiple uses and will

eventually require replacement. It’s

benefit is that it allows easy removal

and repositioning of the probe.

1. Wrap the provided PTFE thread

sealing tape around the Fitting

Body threads.

2. Screw the Fitting Body into the

end of the stopper assembly

(finger-tight).

3. Holding the smooth metal end of

the stopper, use a 7/16” wrench

or socket to tighten the body into

the stopper.

4. Insert the Compression Ferrule

into the Fitting Body and hold it in

place loosely with the Dome Nut.

5. Feed the data logger probe throw

the Compression Fitting until

the base of the probe is tightly

against the Dome Nut.

6. Tighten the Dome Nut to secure

the data logger in place (finger-

tight).

7. Insert the data logger and stopper

assembly back into the thermal

barrier and screw the endcap

of the thermal barrier until the

O-Ring is no longer visible.

ThermoVault Max

NEED HELP?

DOC-1322035-00 | REV 2 2020.04.28

6 Warner Road, Warner, NH 03278

(603) 456-2011

info@madgetech.com

madgetech.com

Product Support & Troubleshooting

• Visit our Resource Library online at madgetech.com/resources.

• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com.

Table des matières

Autres manuels MadgeTech Enregistreur de données

MadgeTech

MadgeTech Therm-A-lert Fiche technique

MadgeTech

MadgeTech SHOCK300 Fiche technique

MadgeTech

MadgeTech RHTemp2000 Manuel utilisateur

MadgeTech

MadgeTech X Series Fiche technique

MadgeTech

MadgeTech Shock101 Fiche technique

MadgeTech

MadgeTech PR140 Fiche technique

MadgeTech

MadgeTech PRHTemp2000 Manuel utilisateur

MadgeTech

MadgeTech Shock101-EB Fiche technique

MadgeTech

MadgeTech HiTemp140-FPST-36 Manuel utilisateur

MadgeTech

MadgeTech OctProcessV2 Fiche technique

MadgeTech

MadgeTech PR2000 Manuel utilisateur

MadgeTech

MadgeTech Level2000 Manuel utilisateur

MadgeTech

MadgeTech EggTemp-RH Manuel utilisateur

MadgeTech

MadgeTech RHTemp1000IS-KR Fiche technique

MadgeTech

MadgeTech Shock101-100 Fiche technique

MadgeTech

MadgeTech Logicbus X Series Fiche technique

MadgeTech

MadgeTech OctVolt Fiche technique

MadgeTech

MadgeTech HiTemp140X2 Series Fiche technique

MadgeTech

MadgeTech QuadVolt-100mV Manuel utilisateur

MadgeTech

MadgeTech HiTemp140-PT Series Fiche technique

MadgeTech

MadgeTech RFCurrent2000A Fiche technique

MadgeTech

MadgeTech RHTemp2000 Manuel utilisateur

MadgeTech

MadgeTech MadgeNet RFRHTemp2000A Fiche technique

MadgeTech

MadgeTech PR1000 Fiche technique

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur

APLICOM

APLICOM A11 Manuel utilisateur