Madentec IntelliSwitch Manuel utilisateur
Computer Access
Computer Access
Solutions
Solutions
User Guide
Rev 1.4
All rights reserved. No part of this publication and the hardware or software described in
it may be reproduced in whole or in part. This User Guide may contain samples of names
and other identication to describe the features and capabilities of IntelliSwitch and
should not be construed as endorsing any product or individual but simply to illustrate the
application.
IntelliSwitch is a trademark of IntelliTools, licensed by Madentec Limited. Windows 95, Windows
98, Windows NT, Windows 2000, Windows ME and Windows XP, are trademarks of Microsoft
Corporation. Apple and Macintosh, OS 9 and OSX are registered trademarks of Apple Computer,
Inc. All other product names are trademarks or registered trademarks of their respective companies.
Discover and Tracker are registered trademarks of Madentec. DiscoverPro, Envoy, and the Madentec
logo are trademarks of Madentec.
Madentec Limited
www.madentec.com
Phone: 780-450-8926
Fax: 780-988-6182
© 2006 Copyright Madentec Limited
United States Radio and TV Interference Regulations
The device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Your IntelliSwitch has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
IntelliSwitch generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by Madentec Limited could
void the user’s authority to operate the equipment.
Contents
Introducing IntelliSwitch 7
Wireless Switch Access 7
How does it work? 7
What’s in the box? 9
Registering IntelliSwitch 9
Installing IntelliSwitch 11
Get Started 11
Installing the Control Panel 11
Windows 13
Mac OSX 13
Connecting IntelliSwitch 15
Wired Mode 15
Wireless Mode 17
Pairing 19
Pairing one Transmitter to one
Receiver 19
Pairing multiple Transmitters to the
same Receiver 21
Clearing a Channel Pairing 23
General Information 25
Built-in Switches 25
Care & Maintenance 25
USB Hubs 25
Mounting 27
Specifications 33
Appendix A: Using the IntelliSwitch
Control Panel Software 35
Introduction 35
The Control Panel Icon 35
The Control Panel Tool Tray Menu
37
The Control Panel Software 37
Appendix B: Using IntelliSwitch with
IntelliTools Overlays 39
Appendix C: Using IntelliSwitch with
DiscoverPro Setups 41
Appendix D: Using IntelliSwitch with
3rd-Party Switch Software43
Index 45
IntelliSwitch User Guide 7
Introducing IntelliSwitch
Wireless Switch Access
IntelliSwitch is a USB switch interface for personal computers. When combined
with assistive technology software, it can enable people with disabilities to control
their computer using nothing more than a single (or multiple) switch. IntelliSwitch
is compatible with both Macintosh & PC computers.
IntelliSwitch can be connected to the computer in one of two ways: by
plugging it directly into the computer via the supplied USB cable, or wirelessly
through the supplied wireless USB receiver.
How does it work?
IntelliSwitch ships with special control panel software that allows you to
configure it for use with many different software programs. The Control Panel
software provides 25 preset switch configurations that allow IntelliSwitch
to control dozens of software titles that already have switch access built-in.
Additionally, IntelliSwitch is fully compatible with all IntelliTools software as well
as DiscoverPro and Discover Envoy software from Madentec. Both OverlayMaker
software from IntelliTools, and the Discover software products from Madentec
allow you to further customize the functions of IntelliSwitch.
8 IntelliSwitch User Guide
1. 2. 3. 4.
5. 6. 7.
Illustration A. - Box Contents
IntelliSwitch User Guide 9
What’s in the box?
Illustration A. shows the contents of what is included in the IntelliSwitch box.
1. IntelliSwitch Transmitter 5. 2 x “AA” Batteries
2. IntelliSwitch Wireless Receiver 6. Quickstart Guide/Registration Card
3. USB Cable 7. Control Panel CD
4. Pairing Tool
Registering IntelliSwitch
It is important to register your new IntelliSwitch. Please complete the registration
card included and mail it as soon as possible. Registration entitles you to one year
free warranty support from the date of purchase. Filling out the questionnaire
on the registration card also entitles you to a free IntelliSwitch Pairing Tool,
compliments of Madentec.
Note In the event that you return your IntelliSwitch for warranty support it is imperative
that you keep the original shipping box.This box has been designed to protect
IntelliSwitch during shipping. Any damage to IntelliSwitch caused by returning it
in a box other than the original is not covered by warranty.
10 IntelliSwitch User Guide
Illustration B. -
IntelliSwitch Transmitter & Receiver
Table des matières
