M2 Antenna Systems 400-800-8 Manuel utilisateur

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com

Rev.00

Model .........................................400-800-8

Frequency Range.......................400 To 800 MHz

*Gain ..........................................10 dBi

Front to back ..............................20 dB Nominal

Beamwidth ...............................52° Nominal

Feed Impedance........................50 Ohms

Maximum VSWR........................1.5:1

Input Connector..........................“N” Female

Power Handling..........................1 kW

Polarity........................................RHCP or LHCP

Operating Temperature..............-50 F To 130 F

Wind area / Survival...................100 MPH

Weight / Ship Wt.........................15 Lbs.

M2 Antenna Systems, Inc.

Model No: 400-800-8

FEATURES:

The M2 400-800-8 Helix antenna offers performance characteristics for specialized fixed and rapid deploy opera-

tions within the 400 to 800 MHz band. It is perfect for either terrestrial or satellite applications. The antenna is shipped

with the helix assembled less ground plane. Finishes are optional. Optional arrays of 2 or more are available. Other fre-

quency ranges and gains are also available down to 100 MHz. Complete motorized, computer controlled AZ-EL systems

are also manufactured by M2. Where circular polarity is not required but high bandwidth is, M2 offers a line of various log

periodic antennas from 5 to 1300 MHz. If it is antenna related, we probably have made it. Call us with your requirements.

SPECIFICATIONS:

*Subtract 2.14 from dBic for dBdc

4402 N. Selland Ave, Fresno CA 93711 (559) 432-8873 FAX (559) 432-3059

www.m2inc.com Email: [email protected]

TOOLS REQUIRED: #2 Phillips head screwdriver, 11/32 nut driver and 7/16” socket open end wrench.

1. Unpack the factory assembled HELICAL antenna, the CENTER REFLECTOR PLATE, and the two (2) REFLECTOR

HALVES. Attach the Reflector halves to the Center Reflector Plate using 8-32 x 3/4” screws and locknuts.

2. Add the g-plane clamp #1 to the center reflector plate near the center hole using 1/4-20 x 3/4 bolts and lock wash-

ers. Then slide the assembly up the rear end of the helix boom. Align the hole in the rear boom section of the helix

assembly with that of the g-plane clamp #1 and use a 1/4-20 x 3/4” bolt to set the position of the ground plane by

threading the bolt through the g-plane clamp #1 and into the boom. This sets the position of the ground plane. Then

add the g-plane clamp #2 and secure using 1/4-20 x 2 1/2 bolts and locknuts.

3. Slide the feed support block on to the helix, note that the hole in the support block is off set, install the block so there

is the greatest distance between the helix and the ground plane. Align the holes on the ground plain and leave loose

at this point. Then slide the ‘N’-connector block assembly on the helix and rotate the connector down through the

large hole in the plate. Secure the block to the plate with four (4) 8-32 x 1-1/2” screws and locknuts. Add the 1/4-20

bolt through the feed block support and ground plane and secure. Now install the 1/4-20 x 1/4” set screw in the

round end of the feed block assembly and tighten, using the supplied 1/8” Allen wrench. Note set screw markings

from original test assembly. Helix should protrude no more than 1/8” past the feed post. This completes the assem-

bly.

400-800-8 HELICAL ASSEMBLY MANUAL

FEED ASSEMBLY DETAIL

GROUND PLANE DETAIL

DESCRIPTION QTY

HELIX AND MAIN BOOM ASSEMBLY .........….1

CENTER MOUNTING PLATE, ..................... ….1

REFLECTOR PLATE .................................... ….2

G-PLANE CLAMP 1” BM DIA #1...................….1

G-PLANE CRADLE CLAMP 1” BM DIA #2 ... ….1

FEED BLOCK ASSEMBLY ...........................….1

FEED SUPPORT BLOCK, .50 X .750 X 2.5”.….1

ASSEMBLY MANUAL...................................….1

HARDWARE BAG

DESCRIPTION QTY

BOLT, 1/4-20 X 2.0 SS..................................….2

BOLT, 1/4-20 X 1-1/4 SS...............................….1

BOLT, 1/4-20 x 3/4” SS .................................….3

SET SCREW, 1/4-20 x 1/4” SS .....................….1

LOCKWASHER, 1/4” SS...............................….2

NUT, 1/4-20, SS............................................….2

LOCKNUT, 1/4-20, SS ..................................….1

SCREW, 8-32 X 1-1/2”, SS ...........................….4

SCREW, 8-32 X 3/4”, SS...............................…10

LOCKNUT, 8-32 SS .........................................14

1/8 ALLEN WRENCH....................................….1

400-800-8 PARTS LIST

M2ANTENNA SYSTEMS, INC.

4402 N. SELLAND AVE.

FRESNO, CA 93722

(559) 432-8873 FAX: 432-3059

www.m2inc.com Email: [email protected]

Table des matières

Autres manuels M2 Antenna Systems Antenne

M2 Antenna Systems

M2 Antenna Systems 303CP26 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 295XP6 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 20M5-125 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 450-800-12 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 12M4DX Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems EB-432/RK70CM Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 146CP8 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems FGHM64 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems FD35.5 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 440-11X Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 2M7X Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 2M8WL Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 678-14 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 140CP14M Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 300XP12 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 915XBISP Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 80M1L Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 167XP22 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems EB-144/RK2M Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 30M3-125 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 436CP16 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 20M4DX Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 440-18 Manuel utilisateur

M2 Antenna Systems

M2 Antenna Systems 35.7-4 Manuel utilisateur

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur