Lynx R FR 5041 Manuel utilisateur

LYNXTechnik AG

Broadcast Television Equipment

Reference Manual

R FR 5041

Series 5000 1RU 19” Rack Frame with Power Supply

(Suitable for up to four Series 5000 Modules)

Revision 1.3 –February 2012

Information in this document is subject to change without notice. No part of this document may be reproduced or

transmitted in any form or by any means, electronic or mechanical for any purpose, without express written permission of

LYNX Technik AG.

LYNX Technik AG may have patents, patent applications, trademarks, copyrights or other intellectual property rights

covering the subject matter in this document. Except as expressly written by LYNX Technik AG, the furnishing of this

document does not give you any license to patents, trademarks, copyrights or other intellectual property of LYNX Technik

AG or any of its affiliates.

LYNX Technik AG

Brunnenweg 3

D 64331 Weiterstadt

Germany

www.lynx-technik.com

R FR 5041 Reference Manual. Rev 1.3

Page 2 of 34

Contents

...............................................................................................................2

Warranty ...............................................................................................................4

Regulatory information ........................................................................................5

Europe........................................................................................................................................ 5

Declaration of Conformity ....................................................................................................... 5

USA............................................................................................................................................. 5

FCC 47 Part 15....................................................................................................................... 5

WARNING..............................................................................................................6

WARNUNG! ...........................................................................................................6

ESD Warning.............................................................................................................................. 7

Getting Started.....................................................................................................8

Packaging .................................................................................................................................. 8

Product Description.................................................................................................................. 8

Installation Instructions ......................................................................................9

Installations-Anweisung.......................................................................................9

Power Supply......................................................................................................10

Power Supply Alarm LED....................................................................................................... 10

Rack Controller ..................................................................................................11

Controller LED Indication....................................................................................................... 11

Module Installation ............................................................................................12

Rack Connections ..............................................................................................13

Rear Termination Panel.......................................................................................................... 13

AC Input and Fuses.............................................................................................................. 13

Rack Reference (Sync Connector)....................................................................................... 14

Redundant Power Input........................................................................................................ 14

Alarm Connection (Terminal Strip) ....................................................................................... 14

Alarm Function...................................................................................................................... 14

LAN Connection (Remote Control)....................................................................................... 15

Hot Swapping .....................................................................................................15

Power Supplies........................................................................................................................ 15

Power Supply Failure............................................................................................................ 15

CardModules............................................................................................................................ 15

System Cooling and Fans...................................................................................16

Fan Replacement..................................................................................................................... 16

Network Configuration .......................................................................................17

The Network Connection Manager........................................................................................ 17

R FR 5041 Reference Manual. Rev 1.3

Page 3 of 34

Configure IP Address.............................................................................................................. 19

Network Attaching the RFR 5041........................................................................................... 20

LYNX Desktop Controller Software ...................................................................21

System Requirements............................................................................................................. 21

Software Installation ............................................................................................................... 21

Starting the Controller Application ....................................................................................... 23

Software Updates ................................................................................................................. 23

Software Operation ............................................................................................24

Control System Layout.......................................................................................24

Device List ............................................................................................................................... 25

User Defined Device List ...................................................................................................... 25

Module Properties................................................................................................................... 27

New Control Window ............................................................................................................ 27

Module Title Area .................................................................................................................... 28

Locate Function .................................................................................................................... 28

Control Tabs ............................................................................................................................ 28

Power Supply Tab................................................................................................................. 28

Settings Tab.......................................................................................................................... 29

HotSync Backup...................................................................................................................... 29

Switching on HotSync........................................................................................................... 30

Options Tab .......................................................................................................................... 31

Events Tab............................................................................................................................ 32

Error Logging Area ................................................................................................................. 32

Service ...............................................................................................................34

Technical Support................................................................................................................... 34

Contact Information ...........................................................................................34

R FR 5041 Reference Manual. Rev 1.3

Page 4 of 34

Warranty

LYNX Technik AG warrants that the product will be free from defects in materials

and workmanship for a period of three (3) years from the date of shipment. If this

product proves defective during the warranty period, LYNX Technik AG at its

option will either repair the defective product without charge for parts and labor,

or will provide a replacement in exchange for the defective product.

In order to obtain service under this warranty, customer must notify LYNX

Technik of the defect before expiration of the warranty period and make suitable

arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated by

LYNX Technik, with shipping charges prepaid. LYNX Technik shall pay for the

return of the product to the customer if the shipment is within the country which

the LYNX Technik service center is located. Customer shall be responsible for

payment of all shipping charges, duties, taxes and any other charges for

products returned to any other locations.

This warranty shall not apply to any defect, failure, or damage caused by

improper use or improper or inadequate maintenance and care. LYNX Technik

shall not be obligated to furnish service under this warranty a) to repair damage

resulting from attempts by personnel other than LYNX Technik representatives to

install, repair or service the product; b) to repair damage resulting from improper

use or connection to incompatible equipment; c) to repair any damage or

malfunction caused by the use of non LYNX Technik supplies; or d) to service a

product which has been modified or integrated with other products when the

effect of such modification or integration increases the time or difficulty servicing

the product.

THIS WARRANTY IS GIVEN BY LYNX TECHNIK WITH RESPECT TO THIS

PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED.

LYNX TECHNIK AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LYNX

TECHNIK`S RESPONISIBILITY TO REPAIR AND REPLACE DEFECTIVE

PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE

CUSTOMER FOR BREACH OF THIS WARRANTY. LYNX TECHNIK AND ITS

VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTIAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF

WHETHER LYNX TECHNIK OR THE VENDOR HAS ADVANCE NOTICE OF

THE POSSIBILITY OF SUCH DAMAGES.

R FR 5041 Reference Manual. Rev 1.3

Page 5 of 34

Regulatory information

Europe

Declaration of Conformity

USA

FCC 47 Part 15

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to the part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

We LYNX Technik AG

Brunnenweg 3

D-64331 Weiterstadt

Germany

Declare under our sole responsibility that the product

TYPE: R FR 5041

To which this declaration relates is in conformity with the following

standards (environments E1-E3):

EN 55103-1 /1996

EN 55103-2 /1996

EN 60950-1 /2006

Following the provisions of 89/336/EEC and 73/23/EEC directives.

Winfried Deckelmann

Weiterstadt, February 2012

Place and date of issue Legal Signature

R FR 5041 Reference Manual. Rev 1.3

Page 6 of 34

WARNING

Electrical supplies in excess of 50 (fifty) volts peak value are potentially hazardous or lethal. AC

supplies between 100 and 250 peak volts exist within the rack frame chassis when connected to

AC power. Only qualified personnel should service the rack frame assembly.

Removal of technical earth may render the equipment dangerous and intentional removal is

prohibited.

This unit has to be separated from mains by disconnecting the power supply cords.

This unit may have two power supplies and two power supply cords. Disconnect all power supply

cords before servicing to avoid electric shock.

DOUBLE POLE / NEUTRAL FUSING

After operation of the fuse, parts of equipment that remain energized might represent a hazard

during servicing.

For continued protection against risk of fire, replace only with same type and rating of fuse.

F1/F2: T2AH250V

Replacement AC fuses must be of the specified type and rating: F1/F2 = T2AH250V

The use of repaired fuses or shorting links has to be avoided.

WARNUNG! WARNING! CAUTION!

WARNUNG!

Wenn das Gerät an das Wechselstromnetz angeschlossen ist, treten innerhalb des Gerätes

Wechselspannungen zwischen 100 und 250 V auf, die potentiell gefährlich oder tödlich sein

können. Deshalb darf eine Reparatur und Instandhaltung nur von qualifiziertem Personal

durchgeführt werden.

Das Entfernen des Schutzleiters kann das Gerät in einen gefährlichen Zustand bringen,

vorsätzliches Entfernen des Schutzleiters ist verboten.

Das Gerät ist durch Abziehen beider Netzstecker vom Netz zu trennen.

Das Gerät kann 2 Netzgeräte mit 2 Netzkabeln haben. Vor Servicearbeiten müssen alle

Netzkabel abgezogen werden, um elektrischen Schlag zu vermeiden.

Die Netzzuführung ist 2-polig abgesichert. Nach Ausfall einer Sicherung können Teile der

Schaltung weiter unter Spannung bleiben und bei Servicearbeiten zu Gefahren führen.

Vor Servicearbeiten Stromversorgung unterbrechen und Teile vor Berührung prüfen.

Um Schutz gegen Feuer aufrechtzuerhalten, sind bei Sicherungswechsel nur Sicherungen des

gleichen Typs mit gleichen Daten zulässig. F1/F2 = T2AH250V

R FR 5041 Reference Manual. Rev 1.3

Page 7 of 34

ESD Warning

The internal electronics parts of this product are static sensitive. Please use caution and

use preventative measures to prevent static discharge or damage could result to

modules.

Electrostatic discharge (ESD) damage occurs when electronic assemblies or the

components are improperly handled and can result in complete or intermittent failure.

Do not handle the module unless using an ESD-preventative wrist strap and ensure that

it makes good skin contact. Connect the strap to any solid grounding source such as any

exposed metal on the rack chassis or any other unpainted metal surface.

Caution

Periodically check the resistance value of the antistatic strap. The measurement should

be between 1 and 10 Megohms.

R FR 5041 Reference Manual. Rev 1.3

Page 8 of 34

Getting Started

Packaging

The shipping carton and packaging materials provide protection for the rack frame during

transit. Please retain the shipping cartons in case subsequent shipping of the product

becomes necessary.

Product Description

The R FR 5041 is a high quality compact 1 RU high 19 inch rack frame enclosure for

LYNX Series 5000 CardModules, designed primarily for broadcast and professional

applications.

The rack frame can accept a maximum of 4 Series 5000 CardModules (any

combination*). Primary power supply and a fully integrated LAN port are also included

(LAN port is for remote control using the included LYNX Desktop Controller Software)

All CardModules and the Primary Power supply are installed and removed from the front.

Module rear connection panels are supplied with each CardModule and are mounted on

the rear of the rack as required. All CardModules and the power supply are hot

swappable.

*Note. Some Card Modules require a larger double height backplane (for I/O reasons)

which will occupy two pack slots. Please refer to individual module specifications for

details. These are typically the modules which currently have a double width backplane

when used with the RFR 5012 2RU rack frame.

The R FR 5041 features an integrated termination panel with connections for AC power

input, remote alarming, LAN control and a rack reference (sync). An external + 12VDC

power input connection is provided for optional external redundant power backup using a

brick power supply (Option R PS 5000)

The Rack frame has a hinged front cover providing easy access to all installed modules

and power supply which are hot swappable.

All electrical contacts inside the RFR 5041, CardModules and power supplies are gold

plated ensuring maximum reliability and protection from corrosion. Modules are

mechanically secured in place and will not shake loose with vibration (ideal for mobile

applications).

The R FR 5041 is one of the primary building blocks in the LYNX Series 5000

CardModule product line providing high quality, modularity and flexibility in a very small

form factor.

R FR 5041 Reference Manual. Rev 1.3

Page 9 of 34

Installation Instructions

The RFR 5041 is intended for operation in broadcast environments. The operation of the

equipment in environments which could produce excessive dust, moisture or extreme

temperatures requires special accommodation, such as:

Dust filters

Air conditioning

Avoidance of condensation

CAUTION!

The power cords must meet the safety requirements of the country where the rack

frame is used and has to be approved in this country, e.g.

CE-Mark in Europe

UL-listed in USA

CSA certified in Canada

CAUTION!

The power supply cords are used to disconnect the R FR 5041 from the AC mains

supply, ensure that the AC socket-outlets are located/installed near the equipment and

are easily accessible.

CAUTION!

The rack frame chassis is CLASS I EQUIPMENT. Before initial operation ensure that

protective earth is connected to the facility wiring and zero potential is established.

The functional earth connection at the rear termination panel is connected internally to

protective earth. If necessary, it may be used for potential equalization to other units.

Installations-Anweisung

Das Gerät R FR 5041 ist für Anwendungen in Fernsehstudios vorgesehen. Der Einsatz in

erhöhter staubiger und feuchter Umgebung oder außergewöhnlichen Temperaturen erfordert

besondere Maßnahmen wie

Klimatisierung

Staubfilter

Vermeiden von Kondenswasser.

ACHTUNG!

Die Netzkabel müssen den Sicherheits-Anforderungen in dem Land entsprechen in dem

das Gerät verwendet werden soll und in dem Land zugelassen sein, z.B.

CE-Zeichen in Europa

UL-gelistet in USA

CSA-Zulassung in Kanada

ACHTUNG!

Die Netzkabel dienen zur Trennung des Geräts vom Netz. Es ist sicherzustellen, dass

die Steckdosen für den Netzanschluss in der Nähe des Gerätes angebracht und zum

Trennen leicht zugänglich sind.

ACHTUNG!

Das Gerät ist nach der Schutzklasse I aufgebaut. Vor der ersten Inbetriebnahme muss

sichergestellt werden, dass der Schutzleiter mit dem zentralen Schutzleiter des

Gebäudes verbunden ist und spannungsfrei ist.

Der Erdanschlussbolzen an der Netzanschlussrückseite ist intern mit dem Schutzleiter

verbunden. Falls erforderlich, kann er für den Potentialausgleich mit anderen Geräten

verwendet werden.

R FR 5041 Reference Manual. Rev 1.3

Page 10 of 34

The rack frame is designed to fit into industry standard 19” equipment housing. The chassis will

occupy 1 RU of rack space. Opening the front cover will allow access to the 19” rack mounting

holes.

Airflow is from side to side, therefore care needs to be taken not to restrict the airflow through the

system. There are no ventilation holes in the top of bottom of the chassis, and no additional rack

space is required to accommodate vertical airflow or ventilation.

Power Supply

The R FR 5041 includes the primary power supply (an optional external power supply

(RPS 5000) can be used for redundancy which will provide a +12VDC input). Should a

power fault develop, the errors are alarmed in the following ways:

Via the LED located on the front of the Power Supply (visible through front cover)

Via a GPO alarm connection to the Termination Panel

Via the LYNX Desktop Controller connected to the LAN port (if used)

If the external redundant power supply (Option RPS 5000) is used then the system will

switch supplies automatically in the event of primary supply failure; with no interruption to

system operation.

The primary power supply is installed and removed from the front of the rack. The supply

locks itself firmly in place. The power supply can be released by pushing up the locking

clip and pulling on the handle above (see below)

Power Supply Alarm LED

LED Status

Description

GREEN

Normal Operation

YELLOW

Warning –High Temperature (over 55ºC)

RED FLASHING

Warning –Over Temperature (over 70ºC)

RED (Continuous)

Voltage Out of Range

OFF

Supply Failure (or AC power disconnected / AC fuses blown)

Alarm LED

Locking Clip

Handle

Table des matières

Autres manuels Lynx Support et étagère

Lynx

Lynx greenMachine RFR 6000 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur