Luxor LE40WTUD Manuel utilisateur
9532-000-384-00
INSTALLATION MANUAL
UNIVERSAL FLAT PANEL DISPLAY CART
Model: LE40WTUD
LUXOR FURNITURE
2245 Delany Rd.
Waukegan, IL 60087
Phone: 847-244-1800 ●800-323-4656
Fax: 847-244-1818- ●800-327-1698
LE40WTUD
Page - 2 - Installation Manual
Congratulations on the purchase of your new Luxor Furniture LE40WTUD Flat Panel Display Cart.
The LE40WTUD is a totally integrated mount/cart solution for 32” – 50” flat panel displays. To truly
appreciate the capabilities and versatility of the LE40WTUD Flat Panel Display Cart, please read this
installation manual completely.
Table of Contents
Warning Statements ....................................................................................................................................................... - 2 -
Luxor Cart Parts List ....................................................................................................................................................... - 3 -
Luxor Cart Installation Tools.......................................................................................................................................... - 4 -
LE40WTUD Shelf Cart Assembly Instructions............................................................................................................ - 5 -
Electrical Assembly and Cable-Track Management System.................................................................................... - 6 -
Base Mount Assembly and Installation........................................................................................................................ - 7 -
Final Assembly ................................................................................................................................................................ - 9 -
TTS Stand Parts List..................................................................................................................................................... - 10 -
TTS Stand Installation Tools ....................................................................................................................................... - 10 -
TTS Stand Assembly .................................................................................................................................................... - 14 -
Back Cover Plate Installation....................................................................................................................................... - 16 -
Warning Statements
WARNING: LUXOR FURNITURE DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY LUXOR FURNITURE PRODUCT
FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS
OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY
SUCH USE, ATTACHMENTS OR MODIFICATIONS.
WARNING: THE FLOOR SHOULD BE CAPABLE OF SUPPORTING A MINIMUM WEIGHT OF 160 LBS. IF NOT, THE FLOOR MUST BE
REINFORCED. THE WEIGHT OF THE FLAT PANEL SHOULD BE NO MORE THAN 160 LBS. PROPER INSTALLATION
PROCEDURES BY QUALIFIED PERSONNEL AS OUTLINED IN THE INSTALLATIONS INSTRUCTIONS MUST BE ADHERED TO.
FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY.
WARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER
SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.
WARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY
UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY
DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
Indicates that the power plug is to be disconnected from the
power outlet.
Contact Luxor Furniture with any questions –
Safety precautions must be taken at all times. Customer Service – 847-244-1800
Warning and Caution statements.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the display
and/or damage to the mounting surface.
Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in
damage to the display and could increase the risk of fire.
A qualified person should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the projector
LE40WTUD
Installation Manual Page - 3 -
Luxor Cart Parts List
NOTE: Please familiarize yourself with all components contained herein.
NOTE: Please review all WARNING and CAUTION statements (see Page 2) before beginning the
installation of the LE40WTUD Flat Panel Display Cart.
Bottom Shelf
(Qty 1)
Short Legs (Qty 4)
Center Shelf
(Qty 1)
Long Legs (Qty 4)
Top Shelf
w/Handle
(Qty 1)
Casters (Qty 4 -
2 locking,
2 non-locking)
Power Cord
Storage Arm
(Qty 1)
Grommet Pass-
Through (Qty 1)
Rubber
Mallet
(Qty 1)
Power Cord
(Qty 1)
Sheet Metal
Screws
(Qty 4)
Power Cord
Retainer Clip
(Qty 1)
“E” Clips
(Qty 2)
Cord Management
Ties
(Qty 4)
Aluminum
Base (Qty 1)
Sandwich Plate
(Qty 1)
LE40WTUD
Page - 5 - Installation Manual
LE40WTUD Shelf Cart Assembly Instructions
Step 1. Push the four casters firmly into the holes in each
corner of the bottom shelf.
Important: Casters must be fully seated. Tap firmly with
rubber mallet to properly seat casters.
Step 2. Insert four (4) long legs into each corner. Using
the rubber mallet, firmly tap each leg until it is
seated securely into position.
Step 3. Position the center shelf over the long legs and
insert each mounting post into each leg. Using a
rubber mallet, firmly hammer center shelf into
legs until all four legs are seated (flush) against
the surfaces of both shelves.
Step 4. Push remaining 4 short legs onto leg posts of
center shelf. Tap firmly into place using the rubber
mallet.
Step 5. Before installing the top shelf, slide the power cord storage arm over the short leg. The power cord storage
arm will allow the user to easily store the power cord while allowing easy extraction when the cord is needed.
NOTE: The power cord storage arm must be mounted on the same side as the handle (see Electrical Assembly
and Cable-Track™ Management System, page 6).
Caster Wheels Rubber Mallet
Bottom Shelf
Rubber Mallet
Long Legs (Qty 4)
Bottom Shelf
Short Legs (Qty 4)
Rubber Mallet
Rubber Mallet
Center Shelf
Power Cord Storage Arm
LE40WTUD
Page - 6 - Installation Manual
Electrical Assembly and Cable-Track Management System
Your LE40WTUD Flat Panel Display Cart incorporates the Cable-Track™ Cord Management System. This exclusive
feature manages electrical cords, keeping them safely out of the way. This system includes a 3-outlet, 15 foot surge
suppressing electric assembly (U.L. and C.S.A. listed) which is built into the safety handle. Please review these
instructions carefully to maximize the added safety provided by Luxor’s Cable-Track™ Cord Management System.
Parts List
1 - Surge protected power cord 2 - “E”-clips
1 - Power cord retainer clip 4 - Cord management ties
4 - Sheet metal screws
Step 1. Firmly seat the 3-plug electric assembly
unit into the handle plug housing (the
top shelf of the cart will need to be
turned over in order to access the
underside of the handle).
Step 2. To secure the power strip, use the
power strip retaining bracket and
two (2) sheet metal screws and attach
using a flat tip screwdriver.
Step 3. After the power strip has been
mounted, route the power cord through
the cord retaining track.
Step 4. Attach the cord management tie into
the starter holes using a sheet metal
screw. Cut off any excess.
Step 5. Secure the power cord using the cord
management tie.
Power Strip Retaining Bracket
Cord Retainin
g
Trac
k
Screwdrive
r
Sheet Metal Screw
Power Strip
Cord Mana
g
ement Tie
Handle Plug Housing
LE40WTUD
Page - 7 - Installation Manual
Base Mount Assembly and Installation
A A A
A A A
Step 1. Determine where the mounting points are on the top shelf of the Luxor Cart (Arrows).
A– Sandwich Mounting Plate Mounting Points (10x32 x 2” Socket Head Screw, M5 Flat Washer, and M5 Lock
Washer Qty 6).
NOTE: It is suggested, for ease of installation, that the following steps be done by two individuals.
Step 2. After locating the mounting points for the aluminum block, it is now time to attach the aluminum block to the
upper sandwich plate.
Step 3. Line up the mounting holes on the upper sandwich plate with the mounting holes on the aluminum block.
Step 4. Once the holes are lined up, use five (5) M5 x 20mm Phillips head screws to attach the two units together.
Aluminum Base Block
M5 x 20mm Phillips
Pan Head Screws
Upper Sandwich
Plate
Screwdriver
LE40WTUD
Page - 8 - Installation Manual
Step 5. Place the upper sandwich plate flat on the top shelf of the Luxor Cart. Line up the mounting holes that are
located on the upper sandwich plate with the mounting holes that are located on the top shelf.
Step 6. Insert six (6) M5 x 20mm Phillips head screws, M5 lock washers and M5 flat washers into each mounting point.
Once they are inserted, gently thread each screw in to their respective hole.
NOTE: At this time, have an assistant hold the lower sandwich plate in place while the screws are being
threaded into place.
NOTE: The picture below shows how the hardware should be attached and in what order.
Upper Sandwich
Plate Mounting
Point
Luxor Cart
Mounting Point
Screwdrive
r
U
pp
er Sandwich Plate
M5 x 20mm Phillips
Head Screw, M5 Lock
Washer
,
M5 Flat
M5 Lock Washe
r
M5 x 20mm Philli
p
s Head Scre
w
M5 Flat Washe
r
LE40WTUD
Page - 9 - Installation Manual
Final Assembly
Step 1. Place the top shelf over the four (4) short legs that are attached to the center shelf.
Step 2. Once the short legs are lined up with the mounting posts of the top shelf, tap the top shelf firmly onto the short
legs using the supplied rubber mallet. This will complete the first part of the LE40WTUD assembly.
Step 3. Place the grommet pass through into the hole located behind the aluminum block.
Rubber Malle
t
Power Cord
Storage Arm
Base Mount Assembly (pre-assembled)
Bottom Shelf
Center Shelf
Top Shelf Grommet Pass
Through
LE40WTUD
Page - 10 - Installation Manual
TTS Stand Parts List
NOTE: Please familiarize yourself with all components contained herein.
NOTE: Please review all WARNING and CAUTION statements (see Page 2) before beginning the installation of the
TTS Stand.
Mounting Brackets
(Qty 2)
Griplate™ (Qty 8)
Back Cover (Qty 1)
Support Poles (Qty 2)
Thread Depth
Indicator (Qty 1)
M8 X 10mm Socket Head Set
Screws (Qty 6)
Allen Wrench (Qty 1)
M5 X 10 Phillips Screws
(Qty 2)
TTS Stand Installation Tools
Soft Material/ Blanket Phillips Head Screwdriver
Allen Wrench
Table des matières
Autres manuels Luxor Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
