3
ENGLISH
Drying: The heat gun can be used to dry out damp wood or other materials. Be vary
careful when operating power tools near damp materials, the presence of water greatly
increases the danger of electric shock. Always refer to the product manufacturer’s
instructions if using the heat gun to dry plaster, paint, or other nishes. Do not use the
heat gun on any ammable material, or any material that may produce hazardous fumes.
Stationary use: This hot air gun can also be used statically, keeping hands free to
manipulate the workpiece. The heat gun is designed to stand upright on a suitable
workbench. The outlet nozzle should point straight upwards. The nozzle must not
contact the workbench or any other object. Ensure that the power cord is well
supported, and will not become caught as you work. Switch the heat gun on, and move
the workpiece into the hot air ow. Take care to keep your hands and face away from
the hot air.
Cleaning and maintenance
Always unplug the heat gun and let it cool down for at least 30 minutes before cleaning
it. You can wash the outside of the heat gun with a soft moist piece of cloth. Avoid using
any toxic or abrasive cleaning solvents.
Safety information
This unit contains a non-toxic insulation material that will burn off during rst use. It will
produce a small amount of smoke, which is normal and not harmful.
Never use the appliance if the power cord has been damaged in any way or does not
work as intended. Repairing, such as disassembling and/or reassembling the appliance,
is only allowed to skilled professionals. By repairing it yourself you will lose all
warranties and there is a risk of electric shock and short circuit. The appliance is only to
be used for household purposes.
Never obscure the inlet vents.
Keep the device away from ammable and explosive substances during use to avoid the
risk of re. Only grab the heat gun with the plastic handle. Make sure the power cable
doesn't come in contact with the hot surfaces of the heat gun.
Do not use the heat gun during thunderstorms.
The product needs to be under constant supervision during use. Unplug the power cable
after use and let the heat gun cool off for at least 30 minutes before storing it away.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do
not play with the appliance.
