Lumens DC130 Manuel utilisateur
Using the Lumens DC130 Document Camera
Connection
Once installed, the basic connection setup should already be done for you. When set up correctly, you should be able to
use programs on your computer AND project from the document camera at the same time. If this doesn’t work (or if your
document camera is not yet connected), please use the diagram below as your guide. The video signal (VGA) cables run
from the computer to the input on the splitter box first. From there, the splitter splits the video signal in two:
1) One cable goes through the document camera and on to the LCD projector.
(Into the document camera at the VGA IN port, and then out to the wall plate from the VGA OUT port).
2) The other cable goes from the splitter directly to your computer monitor.
Use a VGA cable to connect all
parts of the diagram
S
p
litter box
Document
Camera
V
GA IN
V
GA OUT (to LCD
projector)
Power Connection
The document camera
and the splitter box
both require power:
Button Overview
Control Knob Location Power Button
Adjusting Focus
To adjust the focus, turn the knob on the top.
The power
cord on the
splitter box
must also
be plugged
into the
power strip.
Press the red
button to turn
on the
document
camera. The
light on the
button will turn
blue to
indicate that it
is on.
The power
cord runs
from the AC
connection
to your
power strip.
Location
of
buttons
and
knobs
Turn
this to
adjust
focus.
Adjusting the Light
If the image seems too bright or dark, turn the knob. Turn it to the left to make it darker and to the right to make it brighter.
If you are having any trouble with glare move the light away from or closer to the document.
Zoom In and Out
You can zoom in and out two different ways. First, you can move the arm up and down. Or you can press the black knob
once and turn it to have it zoom in digitally.
Capturing Images with the Lumens Document Camera
Press
the
black
knob
once
and turn
Move
the arm
up and
down.
Turn knob
without
pushing it to
change
brightness.
Move the
light away
from the
document to
reduce
glare.
Put the square
end of the
USB cable in
here:
Connect the USB cable from the document camera to the computer.
Connect the flat end of the USB
cable to your computer.
(You can use either the USB
ports on the front or in the back of
the computer.)
Document
Camera
Capturing an Image with View II
Using the Lumens View II Image Capture software
1. Make sure that the document camera is turned on and connected to the computer using the USB cable.
2. Click From to the Start button, click on Programs and then PSProductUBAP.
(The icon looks like this: )
3. Click on the VCR button on the top right. The image from the document camera will appear on the screen.
Capturing an Image
Move the object or document under the document camera, until it is arranged the way you want it for the picture.
1. When you are ready to capture a picture of the object click on the Camera button as shown below.
2. Then, click the capture button at the bottom of the page.
This is the VCR
button. Click it
to make the
document
camera image
appear on your
screen.
1. Click the
camera button
when you are
ready to take the
picture.
2. Click Capture to
take a picture of it.
3. Browse to your F:\ drive space to choose a Save in… location. Give the picture a name and click Save.
Inserting/Viewing a Saved Picture
The picture files that you capture are saved as images. You can insert them into Word, PowerPoint, Publisher or into
many other programs.
To find insert your image into Word, PowerPoint, Publisher or other programs:
1. From the Insert menu, choose Picture and From File…
2. Browse to the image file that you saved. Double-click the file to insert (or click it once to select it, and then click
the insert button).
You can resize the image in your document by clicking and dragging the handles on the corners until the picture is the
desired size.
Select
the file
and then
click
insert
The filename and
the Save button
Table des matières
Autres manuels Lumens Caméra de documents
Lumens
Lumens DC133 Manuel utilisateur
Lumens
Lumens DC-A11 Manuel utilisateur
Lumens
Lumens DC170 Manuel utilisateur
Lumens
Lumens PS660 Manuel utilisateur
Lumens
Lumens DC125 Manuel utilisateur
Lumens
Lumens DC200 Manuel utilisateur
Lumens
Lumens DC-A11 Manuel utilisateur
Lumens
Lumens DC265 Manuel utilisateur
Lumens
Lumens DC-F80 Manuel utilisateur
Lumens
Lumens DC136 Manuel utilisateur
Lumens
Lumens PC170 Manuel utilisateur
Lumens
Lumens dc153 Manuel utilisateur
Lumens
Lumens PC120 Manuel utilisateur
Lumens
Lumens DC120 Manuel utilisateur
Lumens
Lumens DC211 Manuel utilisateur
Lumens
Lumens CU003 Manuel utilisateur
Lumens
Lumens DC170 Manuel utilisateur
Lumens
Lumens DC166 Manuel utilisateur
Lumens
Lumens 3D101 Manuel utilisateur
Lumens
Lumens dc153 Manuel utilisateur
