Lumantek ez-Pro VS10 Manuel utilisateur
3
Revision Number: 1.0.0
Distribution Date: Feb. 2019
Copy Rights
Copyright © 2006~2019 LUMANTEK Co., Ltd.
All Rights Reserved
This document contains information that is proprietary to LUMANTEK.CO., LTD. The
information in this document is believed to be accurate and reliable; however, LUMANTEK
assumes no responsibility or liability for any errors or inaccuracies that may appear in this
document, nor for any infringements of patents or other rights to third parties resulting from
its use.
This publication may contain technical issues, inaccurate information or typos. These will be
revised in revised edition, if there is any. No part of this publication is subject to be reproduced,
stored in retrieval system, or transmitted in any forms, or any means without the prior consent
by Lumantek.
Trademarks
HD ENCODULATOR TM, SD ENCODULATOR TM LUMANTEK Logo, Mega CruiserTM, ORIXTM,
X-CruiserTM, DTA-PlusTM, Media BlasterTM, are Trademarks of Lumantek. Co., Ltd.
Any other trademarks than stated above in this document belongs to its pertinent corporation.
Warranty Period
Lumantek’s products comes with One(1) year limited warranty. Please contact below if you
need more information.
LUMANTEK CUSTOMER SERVICES
TEL:02-6947-7400
FAX:02-6947-7440
4 5
Installation Precautions
This page states the safety measures the users must take to avoid circumstances where the
system may occur physical damages or injuries. Please THOROUGHLY go over this page before
the system installation/operation.
General Precautions
・ Maintain dust FREE condition during and after System Installation/Operation.
・ Please place the system cover in a safe location when opened.
・ Securely stow tools and cables away from the passages.
・ Avoid wearing loosened clothes or accessories during installation/Operation.
・ Avoid any unnecessary actions that may damage/harm system or personnel.
・ Do NOT open the system unless advised by Lumantek representative. Lumantek takes
no responsibility on units with broken RMA seals.
Power Precautions
・ Please check cable overload before connecting the system to the power supply.
・ Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source.
・ Avoid operating on wet floors. Make sure power extension cables, floors, and instruments
are grounded and in a safe operating condition.
・ Please discharge static electricity by touching grounding metals before starting
hardware installation.
・ The grounding parts must be disassembled last.
・ Manufacturer takes no responsibilities on Direct/Indirect losses or damages
due to use of inappropriate parts or services by unauthorized service provider
・ Supplying power during the system installation may cause damages to the system
and personnel.
Contents
1. Introduction
(1) VS10 Interface
(2) Block Diagram
2. Product Configuration
3. Interface
(1) HDMI Multiview Interface
(2) Console Interface
4. LCD Screen
5. VS10 Utility
6. System Specification
07
08
09
10
11
12
17
26
31
6 7
INTRODUCTION
ez-Liveshow is a brand born through combination of LUMANTEK’s encoding and video
switching technology especially designed for small studio size event. VS10 is one of the main
product of ez-Liveshow brand. It is a stand-alone video switcher with scaler installed giving
the ability to set the outgoing resolution from 480i to 1080p60. VS10 allows live monitoring
of 10 input video streams, media, test patterns (color bar, color background), PGM, PVW
through multiview screen. Internal scalers allows VS10 to synchronize frames, and these can
be controlled with console buttons, jog or joystick. Through touch-screen LCD, you can check
the PGM video source. VS10 can receive 10 audio sources from the video inputs and 1 extra
source from external audio (XLR) input. You can change the volume, mute and change
to AFV (audio follow video) modes.
FEATURES
Video Switcher VS10
1. Input : SDI x 8 , HDMI x 2
Output : SDI : AUX x 4 , PGM x 2
HDMI : PGM x 1, Multiview x 1
2. Supports PIP, Key (Chroma/Luma), DSK (Fill/Key)
3. SDI inputs supports both 3G-SDI levels A and B.
4. VS10 has internal scalers in all 10 inputs.
You can use different video resolutions as a source.
1. Introduction
8 9
Front
Rear
+12V DC REF IN PGM Multiview Remote IN1-6 ETHERNET
USB
AUDIO IN
(CH1-2) AUDIO OUT
(CH1-2)
1. Introduction
(1) VS10 Interface
1. Introduction
(2) VS10 BLOCK DIAGRAM
IN 1 (SDI)
IN 2 (SDI)
IN 3 (SDI)
IN 4 (SDI)
IN 5 (SDI)
IN 6 (SDI)
IN 7 (SDI)
IN 8 (SDI)
IN 9 (HDMI)
IN 10 (HDMI)
SDI OUTPUT
(AUX1)
HDMI OUTPUT
(PGM)
SDI OUTPUT
(AUX2)
HDMI OUTPUT
(Multiview)
XLR OUT
XLR IN
SDI OUTPUT
(AUX3)
SDI OUTPUT
(AUX4)
SDI OUTPUT
(PGM)
SDI OUTPUT
(PGM)
PIP1
PIP2
Chroma
Luma
DSK (Fill/Key)
Multiview
BKGD
Cut, Mix, Wipe
Matrix
LAN USB Remote Ref In DC Jack
Scaler
Scaler
Scaler
Scaler
Scaler
Scaler
Scaler
Scaler
Scaler
Scaler
AUX 1-4 PGM IN7-8 IN9-10
REMOTE
10 11
Stand-alone type
Manual
Adaptor
USB
2. Product Configuration
PVW
Monitoring
VS10 Input Monitoring
PGM
Monitoring
PREVIEW
SDI1
SDI5
SDI2
SDI6
SDI3
SDI7
SDI4
SDI8
PROGRAM
3. Interface
(1) HDMI Multiview Interface
12 13
[AUX1-4] Changes AUX outputs
[F1],[F2] Undefined
[PIP1] Go to PIP1 menu
[PIP2] Go to PIP2 menu
[KEY] Go to KEY menu
[WIPE] Go to WIPE menu
[DSK] Go to DSK menu
[AUDIO] Go to AUDIO menu
[JOG] Move through selections
[Menu] Go to MENU
[+Zoom In] Changing values of settings
[- Zoom Out] Changing values of settings
[ENTER] Enter button
[Joy Stick] Changing values of settings
[AUX 소스] Select source for each function
[PVW 소스] Select PVW
[PGM 소스] Select PGM
[WIPE1, WIPE2] Select WIPE transition effect
[MIX] Select MIX transition effect
[CUT] Select CUT transition effect
[TAKE] Automatic transition between PVW and PGM
[BKGD] Background screen triggered on set to ON
[PIP1]/[PIP1 ON] PIP1 screen display on PVW and PGM
[PIP2]/[PIP2 ON] PIP2 screen display on PVW and PGM
[KEY]/[KEY ON] KEY (Chroma/Luma) screen display on
PVW and PGM
[DSK PVW] DSK display on PVW
[DSK PGM] DSK display on PGM
[FTB] Video fades to Black
AUX1-4 PGM Menu
Screen
AUX Source
PGM Source PVW Source Wipe1, Wipe2
MIX
Cut, Take
Fader Bar BKGD, PIP1,PIP2, KEY
DSK PVW, DSK PGM
FTB
F1,F2 PIP1,PIP2,
WIPE, DSK Enter, Menu Key, Audio Joy Stick
3. Interface
(2) Console Interface
14 15
+12V DC REF IN PGM Multiview
Remote
IN1-6 ETHERNET
USB
AUDIO IN
(CH1-2) AUDIO OUT
(CH1-2)
AUX 1-4 PGM IN7-8 IN9-10
REMOTE
[Power Switch] Power On / Off
[DC 12V IN]
[IN1-8(BNC)] Connects SDI signal
[IN 9-10(HDMI)] Connects HDMI signal
[LAN] Used for debug
[USB] Used for updates
(Firmware update/Multiview/Button Map/Media
Player)
[AUDIO IN(XLR)] Audio input socket
[AUDIO OUT(XLR)] Audio output socket
[AUX 1-4, PGM(BNC)] SDI signal output
[REF IN(BNC)] Connects reference signal
[PGM(HDMI)] Outputs HDMI signal
[Multiview (HDMI)] Outputs HDMI signal
[Remote] Used for debug and other control
Remote (DB9 Female)
5 4 3 2 1
9 8 7 6
Pin RS-422 Full-Duplex RS485 Half-Duplex
Pin1 - -
Pin2 - -
Pin3 - -
Pin4 TXD- -
Pin5 Ground Ground
Pin6 RXD+ RXD+/TXD+
Pin7 RXD- RXD-/TXD-
Pin8 TXD+ -
Pin9 - -
3. Interface
(2) Console Interface
16 17
PIP1
PIP2
KEY
(Chroma/
Luma)
Background:
SDI/
HDMI/
MEDIA/
TEST Pattern
(Color Bar,
Color BG)
DSK
(Fill/Key)
(X, Y) coordinates are (0,0)
(X, Y ) coordinates are (1920, 1080)
PIP Border
[Source Aux] Go to PIP source selection menu, can be used as AUX button also.
[PIP Alpha] Select degree of transparency of PIP
[XY/WH] Select if to simultaneously set values of XY (or WH) or not
* On : XY (or WH) values change simultaneously
* Off : XY (or WH) values change independently
[Ratio] Select if to maintain 16:9 ratio setting values of W and H
* On : W, H values change maintaining 16:9 ratio
* Off : W, H values change without maintaining 16:9 ratio
[PIP Position] Change PIP position
[PIP Size] Change PIP size
[Crop(Left, Right, Top, Bottom)] Change PIP crop
[ ] Go to PIP border menu
[Source Aux] Go to PIP source selection menu, can be used as AUX
button also
[Border Alpha] Select degree of transparency of PIP border
[XY/WH] Select if to simultaneously set values of XY (or WH) or not
* On : XY (or WH) values change simultaneously
* Off : XY (or WH) values change independently
[Ratio] Select if to maintain 16:9 ratio setting values of W and H
* On : W, H values change maintaining 16:9 ratio
* Off : W, H values change without maintaining 16:9 ratio
[Border Thick(W,H)] Change border thickness
[TYPE] Select border type (i.e. ellipce, box)
[R,G,B] Select border color
* Use jog, +, -, or touch-screen to change values
PIP1
PIP PositionP IP size
CROP
X
2
4
149
Source Aux
W
ON
342
462
XY/WH
PIP Alpha
Y
90
124
124
Ratio
H
ON
30
110
[Wipe1] [Wipe2] Shows WIPE1, WIPE2 type
[Chroma/Luma] Shows selected KEY
[Transition Rate] Shows AUTO TIME
[System] Shows VS10 SYSTEM RESOLUTION
[Inputs] Shows the source given to the button
HOME MENU
PIP Menu
4. LCD Screen
18 19
[Source Aux] Go to CHROMA source selection menu
(PIP1, PIP2 also selectable as CHROMA source)
[XY] Select if to simultaneously set values of XY or not
[Hue Center, Hue Width, Hue Gain]
Center : Select the transparency color of the foreground
Width : Select the range of transparency color of the foreground
(hue center 4-90 degrees)
Gain : Select the range of half-transparency of the foreground
(0%-100%)
[HUE PICK X, Y] Spoid icon on the Multiview can be controlled with
the joy stick. Selected input in SOURCE AUX is shown on the Multiview
screen.
[PRESET] Select GREEN HIGH/LOW GAIN, BLUE HIGH/LOW GAIN
Change made to set values when PRESET is changed
*Use jog, +, -, or touch-screen to change values
KEYER MENU [Chroma]
[Source Aux]
Go to LUMA source selection menu
(PIP1, PIP2 also selectable as LUMA source)
[LUMA Invert, Trans,Saturation Min/Gain]
Inv : Set invert off/on
Transparency: Set transparency of the foreground at its minimum
Min: Set range of opacity of the foreground
Gain: Set area of translucency of the foreground
(100%: only black turns transparent, 0%: translucent maximum area)
* Use jog, +, -, or touch-screen to change values
KEYER MENU [Luma]
0° 60° 120° 180° 240° 300° 360°
Green
HUESATURATION
Blue
0% 100%
Center
Center
Width
Width
Opaque
Opaque
Opaque
Opaque
Transparent
Transparent
Transparent
Transparent
Gain 0% =120
Gain 100% = Width
Maximum semitransparent region
No semitransparent region
Saturation Minimum
Gain 0% = Maxinum semitransparent region
Gain 100% = No semitransparent region
Saturation Minimum
CHROMA Key Mode
Autres manuels pour ez-Pro VS10
1
Table des matières
Autres manuels Lumantek Changer
