Ltech PS-BLE01 Manuel utilisateur
PS-BLE04PS-BLE02PS-BLE01
www.ltech-led.com
(Programmable)
Bluetooth Smart Wireless Switch
Manual
Product Introduction
Package Contents
Xiaolei Bluetooth smart wireless switch is a key type switch that adopts Bluetooth
5.0 SIG Mesh technology. Powered by batteries, it’s easy to install a wireless switch
in the junction box or place it anywhere as needed, such as pasting on the wall,
counter or table. It can work with a Bluetooth wireless driver to adjust the dim level
or color temperature. Also, it works with gateway
devices to achieve automatic control
modes. Programmable settings m
ake the life smarter and easier.
Manual×1
3M Sticker×1
1
Smart Wireless Switch×1
Technical Specs
2
Working Temperature:
Weight(G.W.):
Wireless Protocol Type:
Product Name:
Working Voltage:
Bluetooth 5.0 SIG Mesh
Bluetooth Smart Wireless Switch
3Vdc (Button battery CR2032)
Package Size (L×W×H)：90×90×24(mm)
100g
Short press: On/Off control
Long press: Stepless dimming (With every other long press, the brightness
level goes to the opposite direction)
Please refer to P6 for more App configuration functions.
Key Functions
1CH 2CH 3CH 4CH
Insulation sheet
Hole for dismounting
Screw hole
Pairing button
Short press to activate
the device
Long press for 6 seconds
to reset to factory defaults
-20 C~55 C
1. Place freely
This product can be directly placed on a desktop.
3. Install with screws
Unscrew the panel with a flat head screwdriver and screw the panel base plate to a
wall or board , then fix the panel cover.
2.Install with 3M stickers
Adhere the panel to a wall directly with the 3M
stickers in the package.
Before you install the panel switch, please pull out the battery insulation sheet.
Please do not place or paste the panel on the surfaces of metal doors, metal cabinets
or other metal items for which may affect wireless communication distance.
3
Dimensions
Unit：mm
13.5 60
86
86
Installation Instructions
( ) Install with 3M stickers ( ) Unscrew
Application Diagram
Bluetooth Personal Area Network Application
BLE Driver
APP
DIM CT RGB
DIM CT RGB
BLE
BLE
Cloud Automation Application
Router
APP
WiFi Ethernet
WiFi/4G/5G
Home appliance module
Infrared /433
WiFi
Super Panel
BLE BLE
Smart Wireless Switch
Automation 1
BLE
Automation 1
Automation 2
Airer
Air
conditioning
Fan More
Automation 1
DIM CT
RGB
TV
Fan
DIM
RGB
Automation 2
More
Weather Outdoor temp.Indoor temp. Humidity
Sunny
Wednesday
Smart Wireless Switch
Driver
Driver
Automation 2
4
Curtain
More
CT
More
App Operating Instructions
1.2 Open the App and log in or register an account.
1.3 Create a home if you are a new user. Click "+" icon in the upper right corner
to access “Add Device “ list.
1. Register an account
1.1 Scan the QR code below with you mobile phone and follow the prompts
to complete the app installation.
Scan and download the App
Add a device
5
2. Pairing instructions and function settings
Access “Add Device “ list and follow the prompts to add the driver firstly. Pick “Remote-
Wireless Switch” from the list. Follow the prompts to pull out the insulation sheet first,
and then short press the built - in pairing button to put the device into activated mode.
The indicator light is flashing slowly at this moment, then click “Bluetooth Search” and
follow the prompts to add the device. After pairing up, go to the control interface and
select the buttons you are going to edit. The buttons allow you to bind lights, light groups
and panels. Also, you are able to short press /long press them to set up the lighting effects.
6
This wireless switch can be linked up with gateway devices (such as LTECH Super
Panel) to achieve automation.
3. Advanced function
7
4. How to delete the device
Go to settings and click “Delete”. Follow the prompts to connect your mobile phone to
Bluetooth and make sure the device is near you phone. Remove the panel switch cover
and short press the pairing button to put the device into activated mode. Click “Delete
Device” and the device will exit the network successfully.
8
Warranty Agreement
Attentions
Products shall be installed by qualified professionals.
LTECH products are non-waterproof (special models excepted). Please avoid the sun and rain.
When installed outdoors, please ensure it is mounted in a water proof enclosure.
Good heat dissipation will extend the working life of products. Please ensure good ventilation.
Please check if the working voltage used complies with the parameter requirements of products.
The diameter of wire used must be able to load the light fixtures you connect and ensure the
firm wiring.
This manual is subject to changes without further notice. Product functions depend on the goods.
Please feel free to contact our official distributors if you have any question.
Update Time: 28/04/2021_A1 9
Warranty exclusions below:
No any contract signed by LTECH.
Warranty labels and barcodes have been damaged.
Damage caused by natural disasters and force majeure.
Products with severe physical damage.
Beyond warranty periods.
Warranty periods from the date of delivery : 2 years.
Free repair or replacement services for quality problems are provided within warranty periods.
Any artificial damage caused by high voltage, overload, or improper operations.
1. Repair or replacement provided is the only remedy for customers. LTECH is not liable for
any incidental or consequential damage unless it is within the law.
2. LTECH has the right to amend or adjust the terms of this warranty, and release in written
form shall prevail.
Before you power on products, please make sure all the wiring is correct in case of incorrect
connection that causes damage to light fixtures.
If a fault occurs, please do not attempt to fix products by yourself. If you have any question,
please contact your suppliers.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Ltech Changer
