LSIS S100 Series Manuel utilisateur

LSIS S100 Quick Start Guide

1 LSIS S100 Quick Start Guide

Rev I_6-19-2017

1. S100 Basic Setup Parameters

The basic drive and motor parameters are shown in Table 1. Set the parameters according to your application.

Table 1. S100 Basic Setup Parameters

Note: Many applications will not require changes to the basic setup parameters from their default values.

1.1 S100 Recommended Additional Parameter Changes

The S100 drive has some default settings the user may want to change to obtain better protection of the

drive/motor and the application. These changes are recommended, but not needed for all applications.

Auto Reset

•Program CON 71 bit 3 to High State (0100).

•Program PRT 08 (Reset/Restart after a fault) to “1” (Yes).

•Program PRT 09 (Number of Retries) to a number between 0 -10.

•Program PRT 10 (Auto Reset Time) to desired time to allow cause of fault to clear and safe starting.

Start on Power Loss

•Program ADV 10 (Power on Start) to “1” (Yes).

Phase Loss

•Program PRT 05 (Phase Loss) to detect input and/or output phase loss.

Note: This parameter display is in the form of 2 bits on the smaller (less than 30kW) S100.It is displayed as DIP switches on the larger

S100. Left bit is the Input, Right bit is the Output. “Enabled” is represented with a line on the top of the LED display. “Disabled” is

represented with a line at the bottom of the LED display.

LSIS S100 Quick Start Guide

2 LSIS S100 Quick Start Guide

Rev I_6-19-2017

2. HP to kW Conversion Table

Use the following conversion table to enter the motor HP. Select the closest size the drive allows in kW (motor

power is in kW on most LSIS drives)

Table 3. HP to kW Conversion

3. RPM Entry

Table 4. Poles to RPM

RPM

3600

1800

1200

Poles

Example:

If actual motor RPM is 3450.

•Set Motor Poles = 2

•Set Slip RPM = 150 RPM

HP 1/4 1/2 11.5 2 3 5 7 10 15 20 25 30 40 50 60 75 100 125 150 200 225 250 300 350 400 500 600

kW 0.2 0.4 0.75 1.1 1.5 2.2 3.7 5.5 7.5 11.0 15.0 18.5 22.0 30.0 37.0 45.0 55.0 75 90 110 132 160 185 220 280 315 375 450

Autres manuels pour S100 Series

Table des matières

Autres manuels LSIS Entraînement CC

LSIS

LSIS iS7 Series Manuel d'utilisation et d'entretien

LSIS

LSIS S100 Series Manuel utilisateur

LSIS

LSIS SV008iC5-1F Manuel utilisateur

LSIS

LSIS 004iC5-1 Manuel utilisateur

LSIS

LSIS G100 Guide de l'utilisateur

LSIS

LSIS S100 Series Manuel utilisateur

LSIS

LSIS SV-iS7 series Manuel utilisateur

LSIS

LSIS LSLV-H100 Manuel utilisateur

LSIS

LSIS SV-iS7 series Manuel utilisateur

LSIS

LSIS Starvert iG5A Series Manuel utilisateur

LSIS

LSIS H100 Manuel utilisateur

Manuels Entraînement CC populaires d'autres marques

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuel utilisateur

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuel de la liste des pièces

Chamberlain Garog

Chamberlain Garog D Series Manuel utilisateur

Parker

Parker PDS Series Manuel utilisateur

Festo

Festo DGC G Series Guide de configuration

Binks

Binks QS-5012-1-CE Manuel utilisateur

Danfoss

Danfoss VLT 2800 Series Fiche technique

ABB

ABB ACQ580-01 Series Manuel d'installation

YASKAWA

YASKAWA CANopen SI-S3 Manuel utilisateur

GE D20A6 Manuel utilisateur

Unex

Unex MC-D-250-1000-050W-TW Manuel utilisateur

Geckodrive

Geckodrive G213V Manuel utilisateur

ABB

ABB RSYC-01 Manuel utilisateur

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuel du propriétaire

WEG

WEG DeviceNet CFW500 Manuel utilisateur

Siemens

Siemens SINAMICS G Fiche technique

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Mode d'emploi

SOMFY

SOMFY JR RU 30 Manuel utilisateur