Loxit 8262 Manuel utilisateur

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, SK12 1YJ

t: +44 (0) 845 519 5191 or +44 (0) 1625 856 801 f: +44 (0) 845 519 5192 e: sales@loxit.com w: www.loxit.com

1. Establish the desired position of the interactive whiteboard

2. Headroom. Consult the dimension chart in the manufacturer’s instruction manual to establish whether

there is sufficient headroom to mount the whiteboard in the desired position. Adjust position of board if

necessary.

3. Attaching the boom to the wall.

4. Offer up the boom and mark the fixing holes on the wall. Ensure that the top flange of the boom is

horizontal using the spirit level and fix the boom to the wall using fixings not provided.

5. Attaching the projector to the boom. Firstly turn the projector upside down on a soft surface and screw

the plate to the underside of the projector using M6 screws provided. The arrow points away from the wall

when mounted

8262 ULTRA SHORT THROW WALL BOOM

FITTING INSTRUCTIONS

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, SK12 1YJ

t: +44 (0) 845 519 5191 or +44 (0) 1625 856 801 f: +44 (0) 845 519 5192 e: sales@loxit.com w: www.loxit.com

6. Offer the whole unit up to the boom and screw into place using the 3 bolts situated in the end of the boom.

7. Using a spirit level check the projector plate is level both (A) parallel to the wall and (B) parallel to the

boom. Lightly tighten the securing bolts in place

8. Consult the dimension chart in the manufacturer’s instruction manual to establish the optimum distance

between the front of the projector and the board.

Slacken the two securing screws on top of the boom, slide the boom out to achieve the correct distance

and lightly lock the screws in place. Recheck that steps 8 to 10 are still aligned

9. If a very large board is being mounted, it is possible to achieve extra throw distance by mounting the

projector on the plate in the opposite direction, i.e. arrow facing the wall.

10. You can now proceed with your board mounting in accordance with the manufacturer’s instructions.

11. If the standard security cable kit has been purchased, loop the large end stopper end of the cable round

the security bar on the projector as shown. Using the oval loop thread the cable back up to make a

lasso.

Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, SK12 1YJ

t: +44 (0) 845 519 5191 or +44 (0) 1625 856 801 f: +44 (0) 845 519 5192 e: sales@loxit.com w: www.loxit.com

12. Thread the cable up the hollow boom and terminate on the keyhole slot at the base of the boom with the

padlock provided

Note:

Wall fixings are not included. Ensure wall fixings used are suitable for the task.

Maximum projector boom loading: 20kg

Ensure both screws on top of boom fix tightly against the inner slider when in use.

Table des matières

Autres manuels Loxit Support et étagère

Loxit

Loxit 8996 Manuel utilisateur

Loxit

Loxit WF750 Manuel utilisateur

Loxit

Loxit 8990 Manuel utilisateur

Loxit

Loxit 500 Flip Top 8514 Hi-Lo Manuel utilisateur

Loxit

Loxit Hi Lo Duo 8940 Manuel utilisateur

Loxit

Loxit 8960 Manuel utilisateur

Loxit

Loxit 8423 Manuel utilisateur

Loxit

Loxit Hi Lo Mono 600 Manuel utilisateur

Loxit

Loxit Screen Lift 750 Manuel utilisateur

Loxit

Loxit Hi Lo Mono 500 Manuel utilisateur

Loxit

Loxit 8996 Manuel utilisateur

Loxit

Loxit 8509 Manuel utilisateur

Loxit

Loxit 8510 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur