Lowrance HDS-5 Manuel utilisateur

Function keys

Zooms out the Radar, Sonar and Chart pages.

ZOUT

Zooms in the Radar, Sonar and Chart pages.

ZIN

Press to return to a previous screen, clear data and close

menus. Pressing Exit on the Chart page will quickly switch

between displaying the boat symbol and the last cursor

position.

EXIT

Press to save data, change values and accept menu

commands; also acts as a short cut key for important

functions such as saving a waypoint at the cursor position

on the Chart page.

ENTER

Accesses the features available on each page.

Press to select the page (screen) to display or to access utilities such as the

waypoints list and les. Press and hold to switch control between the panels on

combo (split screen) pages.

PAGES

Press to turn the unit on, adjust the backlight or place the unit in low power

(standby) mode. Press and hold to turn the unit off.

LIGHT

POWER

Activates cursor on Chart page. Press up, down, left or right to move the cursor.

Arrow

Keypad

Press to save a waypoint at your current GPS position. Press and hold to search

for waypoints and other points of interest (POI's) or quickly access waypoints,

routes and trails.

WPT

FIND

Creating a Man Overboard (MOB) position:

Press the ZOUT and ZIN keys at the same time to create a MOB waypoint with a line to

your boat position.

Quick Start Guide

HDS-5 & HDS-7

*988-10142-001*

To view a page:

1. From any screen press PAGES to access the Pages screen.

2. Select the desired page display.

To adjust Panel sizes on a Combo page:

1. From the Pages screen, select the desired Combo page and press the

MENU key. Selecting Sonar + Chart will display a Sonar-Chart combo

page.

2. Select Adjust panel sizes. Use the on-screen button to adjust the panel size.

Pages screen

NOTE: Hold down the PAGES key to switch active panels when

viewing a combo page.

To Create Waypoint at current position:

1. Press the WPT/Find key to create a waypoint at the your current position.

To Create Waypoint at the cursor position on Chart or Sonar page:

1. Place the cursor on the Chart page

where you want to set the waypoint

and press the ENTER.

2. Select Save from the New Waypoint

menu and press ENTER.

Waypoints

Press the keypad to the left to scroll the Sonar page back to view previous sonar re-

turns. When the cursor is onscreen the sonar does not show real time sonar returns.

Press EXIT to return to normal operation.

Sonar (Sonar units only)

Cursor

Cursor depth Fish arches

Information at

cursor's position

History bar Amplitude

scope

Range scale

To Navigate to the cursor:

1. From the Chart page, center the cursor

over a point of interest and press MENU.

2. Select Go to Cursor and press ENTER.

To cancel navigation:

1. From the Chart menu select Navigation

and press ENTER.

2. Select Cancel and press ENTER.

Go To Cursor / Cancel Navigation

Sonar display settings/options

To adjust Sensitivity and Colorline:

1. From the Sonar page press the MENU key.

2. Select Adjust and press ENTER.

3. Press the keypad up/down to select Sensitivity or Colorline. Press the

keypad left/right arrows to make adjustments.

Fishing Modes

Enhances the performance of your unit by providing preset packages of sonar

settings geared to specic shing conditions.

Sonar page Split screen options

To select a Split screen display:

1. From the Sonar page press MENU.

2. Select Sonar options and press ENTER.

3. Select Split to open the Split menu.

4. Select the desired split screen and press ENTER.

Transducer Type

Selecting the proper transducer type from the sonar installation menu helps

optimize HDS performance by enabling settings (temperature and frequency) and

menu options specic to your transducer.

To select a Transducer Type:

1. Press MENU twice.

2. Select Sonar and press ENTER.

3. Select Installation and press ENTER.

4. Select the desired transducer type and

press ENTER.

5. Highlight Save and press ENTER.

Transducer type menu

When the HDS is connected to a SonicHub server you can use your HDS unit to

control audio playback from iPod, iPhone, USB mass storage device (mp3) and

AM/FM radio.

Enabling audio

You must enable Audio on your display unit’s settings menu

to control audio playback with your unit.

The media bar panel will not be visible until audio has been

enabled.

SonicHub media bar panels

The media bar panel varies from one audio source to another, see examples below:

SonicHub

Artist

Audio

source Track

Time

remaining

Shufe

indicator

Repeat

indicator

Volume

level

Signal

strength

Volume

level

Audio

source Station

RDS

Display

NOTE: Hold down the PAGES key (2 seconds) to switch between active

panel and SonicHub operation.

Operating SonicHub audio

When the media bar is the active panel, press the MENU key to access the

SonicHub menu. Adjustments to SonicHub audio playback settings can be made

from the SonicHub menu, function keys and the keypad.

Volume control, song and station selection, favorites and audio source can be

adjusted/accessed using your units function keys and keypad. Shufe and Repeat

features (iPod, iPhone and USB Mass Storage) must be turned on/off on the

SonicHub menu.

Function key controls

ZOOM IN — Increase Volume

ZOOM OUT — Decrease Volume

ENTER — Mute

Keypad Controls

iPod, iPhone, USB Mass Storage AM/FM radio

Scroll forward

through favorites

station

(AM/FM

— tune

forward)

station:

(AM/FM

— Tune

backward)

Scroll backward

through favorites

Audio Source

track Next track

Play/Pause

NOTE: When listening to AM/FM radio, press and hold the keypad left

or right to switch from tune mode to seek mode.

NOTE: When playing audio from an iPod or USB storage device, press

and hold the keypad left or right to rewind or fast forward through a

track.

Autres manuels pour HDS-5

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lowrance Sondeur de pêche

Lowrance

Lowrance 5 HDI Manuel utilisateur

Lowrance

Lowrance Simrad LiveSight Manuel utilisateur

Lowrance

Lowrance HDS-12 Gen2 Touch Manuel utilisateur

Lowrance

Lowrance ELITE-4X HDI Manuel utilisateur

Lowrance

Lowrance ELITE TI Manuel utilisateur

Lowrance

Lowrance M68C IceMachine Manuel utilisateur

Lowrance

Lowrance ELITE-4X HDI Manuel utilisateur

Lowrance

Lowrance LCX-20C Manuel utilisateur

Lowrance

Lowrance Elite 5X DSI Manuel utilisateur

Lowrance

Lowrance StructureMap HDS Gen 2 Manuel utilisateur

Lowrance

Lowrance HOOK-7 Manuel utilisateur

Lowrance

Lowrance Elite FS 7 Manuel utilisateur

Lowrance

Lowrance Elite-5 DSI Manuel utilisateur

Lowrance

Lowrance Elite-5 HDI Manuel utilisateur

Lowrance

Lowrance HOOK2 Manuel utilisateur

Lowrance

Lowrance HDS-5x Manuel utilisateur

Lowrance

Lowrance HDS Gen3 Touch Manuel utilisateur

Lowrance

Lowrance Elite-5m HD Gold Manuel utilisateur

Lowrance

Lowrance LCX-17M Manuel utilisateur

Lowrance

Lowrance Elite-7 Broadband Manuel utilisateur

Lowrance

Lowrance HDS PRO Instructions de montage

Lowrance

Lowrance LCX-18C Manuel utilisateur

Lowrance

Lowrance HOOK-4x Manuel utilisateur

Lowrance

Lowrance Hook Reveal Series Manuel utilisateur

Manuels Sondeur de pêche populaires d'autres marques

Norcross

Norcross D10DX.01T Manuel utilisateur

Hawkeye Mfg

Hawkeye Mfg FishTrax FT1PXC Manuel utilisateur

JRC

JRC JFV-700HP Manuel utilisateur

JRC

JRC FF50 Manuel utilisateur

Navman

Navman FISH 4200 Manuel utilisateur

Humminbird

Humminbird 140c Fishin' Buddy Manuel utilisateur

Furuno

Furuno FCV-628 Manuel utilisateur

Humminbird

Humminbird Tour Series Manuel utilisateur

Humminbird

Humminbird 585C Manuel utilisateur

Humminbird

Humminbird 595C Manuel utilisateur

Raytheon

Raytheon V720 Manuel utilisateur

Humminbird

Humminbird 400TX Manuel utilisateur

Norcross

Norcross ML100TDR ML100R ML100DR ML100tr Manuel utilisateur

Furuno

Furuno FCV-627 Manuel utilisateur

Fuso

Fuso FEG-881 Manuel utilisateur

Humminbird

Humminbird Matrix 47 Manuel utilisateur

Humminbird

Humminbird PiranhaMAX 165 Manuel utilisateur

Humminbird

Humminbird 586C Manuel utilisateur