Lowrance HOOK2 Manuel utilisateur

| 1

HOOK2 x Series | Quick Guide - EN

HOOK Guide

4x GPS, 5x GPS HDI, 7x GPS HDI models

Front controls

1Pages Press to toggle between available pages.

2Zoom in/

out

Press to zoom the image.

Press both keys simultaneous to create a MOB

(Man Over Board) waypoint at the vessel's

position.

3Arrows

On the GPS Plotter page: press to position the

cursor on the image. Press to pan the image in

any direction.

In menus and dialogs: press to highlight an

option.

4Exit (X) In menus and dialogs: press to return to

previous menu level and to exit a dialog.

5Menu/

Enter

With no menu or dialog active: press to

display the menu.

In menus and dialogs: press to conrm a

selection.

6Cursor/

Waypoint

On the GPS Plotter page: Press to activate/

deactivate the cursor.

On any page: press and hold to save a

waypoint.

7Power Press to display the System Controls dialog.

Press and hold to power the unit on/o.

System Controls dialog

•Option ON

•Option OFF

Display illumination

•Set brightness and select day/night mode from the System Controls dialog

•Repeat short presses on the Power key to cycle the backlight brightness

Sonar/Flasher/DownScan pages

Sonar Flasher Downscan

(5x and 7x models)

By default the unit is set to Auto mode, and all settings are automated.

•Change to Custom mode to allow for customizing the settings.

GPS Plotter page

•Zoom the image by using the Zoom keys

•Pan the image in any direction by using the Arrow keys

•Display item information by positioning the cursor on an

item and then pressing Menu/Enter key

| 3

HOOK2 x Series | Quick Guide - EN

Creating a route on the GPS Plotter page

1. Press an Arrow key to activate cursor mode

2. Press the Menu/Enter key to activate the menu, then select

the New route option in the menu

3. Press the Arrow keys to position the rst route point, then press the Menu/Enter key

to conrm the position

4. Repeat step 3 to position additional route points

5. Press the X key to save the route

Trails

The system automatically tracks and draws the vessel's movement on the

chart panel. Trails are managed from the Trails dialog.

To display the trails dialog:

1. Select W/R/T from the menu

2. Select the Trails tab in the dialog

3. Select the trail you want to edit

Creating waypoints

Press and hold the Cursor/Waypoint key to save a new waypoint.

•With cursor inactive, the waypoint is placed at the vessel's position

•With cursor active, the waypoint is placed at the cursor position

Overlay data

The data type can be changed, and the item position on the image is

selectable.

The data items can be turned on/o from the System Controls dialog.

Each data item can be removed individually from the panel:

1. Select the Edit overlay option in the System Controls dialog to turn

the unit into edit mode

2. Press the Menu/Enter key to display edit options

3. Press the X key to leave edit mode

Stopping the sonar

Use the Stop Sonar option in the System controls dialog to stop the

transducer from pinging without turning the unit o.

Creating a Man Over Board (MOB) waypoint

Activate a MOB waypoint by pressing both Zoom keys simultaneously.

Settings dialogs

Used for system conguration.

Learn more about marine electronics and navigation we have.

Autres manuels pour HOOK2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Lowrance Sondeur de pêche

Lowrance

Lowrance M68C IceMachine Manuel utilisateur

Lowrance

Lowrance HOOK Reveal-7x Manuel utilisateur

Lowrance

Lowrance LCX-18C Manuel utilisateur

Lowrance

Lowrance FishHunter 3D/PRO Manuel utilisateur

Lowrance

Lowrance HOOK-7 Manuel utilisateur

Lowrance

Lowrance HDS Gen3 Touch Manuel utilisateur

Lowrance

Lowrance HDS-8 Manuel utilisateur

Lowrance

Lowrance HDS Carbon Manuel utilisateur

Lowrance

Lowrance StructureScan 3D Manuel utilisateur

Lowrance

Lowrance LCX-20C Manuel utilisateur

Lowrance

Lowrance Elite FS Manuel utilisateur

Lowrance

Lowrance HDS-5 Manuel utilisateur

Lowrance

Lowrance HDS Gen2 Touch Manuel utilisateur

Lowrance

Lowrance Elite-7 Broadband Manuel utilisateur

Lowrance

Lowrance Elite-5 DSI Manuel utilisateur

Lowrance

Lowrance Speed Sensor Manuel utilisateur

Lowrance

Lowrance 5 HDI Manuel utilisateur

Lowrance

Lowrance ELITE-4X HDI Manuel utilisateur

Lowrance

Lowrance HDS-5x Manuel utilisateur

Lowrance

Lowrance ELITE TI Manuel utilisateur

Lowrance

Lowrance HDS PRO Instructions de montage

Lowrance

Lowrance Elite FS 7 Manuel utilisateur

Lowrance

Lowrance HDS Carbon Manuel utilisateur

Lowrance

Lowrance Elite-5 HDI Manuel utilisateur

Manuels Sondeur de pêche populaires d'autres marques

Norcross

Norcross D10DX.01T Manuel utilisateur

Hawkeye Mfg

Hawkeye Mfg FishTrax FT1PXC Manuel utilisateur

JRC

JRC JFV-700HP Manuel utilisateur

JRC

JRC FF50 Manuel utilisateur

Navman

Navman FISH 4200 Manuel utilisateur

Humminbird

Humminbird 140c Fishin' Buddy Manuel utilisateur

Furuno

Furuno FCV-628 Manuel utilisateur

Humminbird

Humminbird Tour Series Manuel utilisateur

Humminbird

Humminbird 585C Manuel utilisateur

Humminbird

Humminbird 595C Manuel utilisateur

Raytheon

Raytheon V720 Manuel utilisateur

Humminbird

Humminbird 400TX Manuel utilisateur

Norcross

Norcross ML100TDR ML100R ML100DR ML100tr Manuel utilisateur

Furuno

Furuno FCV-627 Manuel utilisateur

Fuso

Fuso FEG-881 Manuel utilisateur

Humminbird

Humminbird Matrix 47 Manuel utilisateur

Humminbird

Humminbird PiranhaMAX 165 Manuel utilisateur

Humminbird

Humminbird 586C Manuel utilisateur