Longevity 7236 Manuel utilisateur

Congratulations on purchasing a Longevity Acrylics bathware

product. Be assured that your product has been developed and is

a highly engineered, quality product that is strong and durable to

withstand the rigors of everyday life.

• Strength, durability and toughness to withstand frequent use

• Resistant to everyday wear and tear, stains, and superﬁcial scratches

• Resistant to UV, and many household chemicals

• Qualities that make light work of cleaning and maintenance

• Beautiful warm, smooth surfaces that feel comfortable against the

skin

INSPECTION: THIS ACRYLIC UNIT HAS BEEN CAREFULLY

INSPECTED AND PACKED FOR SHIPMENT AT LONGEVITY

ACRYLICS INC. PLEASE FULLY INSPECT THE UNIT BEFORE

INSTALLATION.

Carefully remove the unit from the carton. Do not destroy the

cardboard until you have inspected the unit thoroughly. Should your

inspection reveal any damage or defect in the ﬁnish, do not install the

unit—contact your distributor immediately.

The warranty does not cover damages or defects to the ﬁnish claimed

after the unit has been installed. Longevity’s responsibility for shipping

damages ceases upon delivery of the product in good order to the

carrier.

Refer any claims for damages to the carrier.

INSTALLATION INSTRUCTIONS

BUILDING CODES

Be sure to follow local building codes when installing the bathware

unit.

IT IS ALWAYS RECOMMENDED TO HAVE A PROFESSIONAL

AND COMPETENT PLUMBER INSTALL LONGEVITY ACRYLICS

BATHWARE.

CAUTION

• To cut plumbing ﬁxture openings on your bathware unit ensure

that you use the correct size hole saw based on the selected unit

design.

• Always cut a plumbing ﬁxture opening from the ﬁnished side of

the unit.

• Always ensure that the surface of the unit is protected to prevent

scratches in the surface.

• Install plumbing ﬁxtures based on the manufacturers

recommended installation instructions.

• The drain location on the unit is shown; however actual

installation will depend on the waste and overﬂow which is

purchased separately.

LONGEVITY ACRYLICS INC. IS NOT RESPONSIBLE FOR ANY

DAMAGES INCURRED AS A RESULT OF POOR INSTALLATION

OF THE PRODUCT.

REQUIRED TOOLS

Screwdriver Pencil Silicone Sealant Gun

Electric DrillLevel Square

Safety Equipment:

Gloves, Boots and Glasses

Every effort has been made to offer the most current, correct, and clearly expressed information possible. Nevertheless, inadvertent errors or inaccuracies in the information may occur.

Longevity Acrylics disclaims any responsibility for errors or accuracy of information that may be contained in its documents or web pages. Longevity Acrylics Inc. makes no warranties or

representations whatsoever regarding the quality, content, completeness, suitability, adequacy, sequence, accuracy or timeliness of such information and data.

BATHTUBS

(Excludes Freestanding 6636 & 6634 models)

V1-08/2020 IJM

INSTALLATION

GENERAL INSTALLATION NOTES

IMPORTANT: READ ALL INSTRUCTIONS CAREFULLY

BEFORE PROCEEDING. STRUCTURE MEASUREMENTS

MUST BE VERIFIED AGAINST THE UNIT. ENSURE THE

STRUCTURE MEETS THE REQUIRED DIMENSIONS, IT IS

LEVEL AND SQUARE.

Check that ﬂoor is level, adjust as necessary. Shimming may be

required to level the bathware unit to ensure adequate drainage.

Do not level directly behind or under the ﬂange and/or at the

front of the unit.

ALWAYS ENSURE THAT THE SURFACE OF THE UNIT IS

PROTECTED TO PREVENT SCRATCHES IN THE SURFACE.

DIMENSIONS VARY FROM A TUB ONLY, WHIRLPOOLS

AND THERAPEUTICS. IT IS ALWAYS BEST TO HAVE THE

TUB ON SITE BEFORE PREPARING TO INSTALL FOR

ACCURATE HEIGHT DIMENSION.

INSTALLATION STEPS

1. Unpack the bathtub and be very careful during installation

so as to not damage the acrylic surface of the tub. It is

important that the tub rest on the ﬂoor. The deck is not to be

used to support the tub.

2. Do not build a frame and sit the tub onto it until the tub is

installed, plumbed, shimmed and tested. Doing so can result

in cracks on the deck if the tub is not ﬁrmly sitting on the

ﬂoor. It is important that the tub rest on the ﬂoor. The deck

is not to be used to support the tub.

The acrylic tub must be installed level to ensure proper

operation and drainage. Since all ﬂoors are not level,

shimming of the base may be required. All shims used to

level base should be nailed or screwed into place.

3. Electrical power supply must have ground fault breaker in

circuit.

4. Bathtub ﬁttings should be installed as per manufacturers

instructions.

5. Always ensure access to motors and blowers as the

manufacturer can not be held responsible for removal of

tiles etc. should warranty work be required.

6. Always test installation. Fill with water and test all working

pump parts before closing around the tub with ﬁnishing

trim.

CLEANING

For normal care and cleaning use a soft cloth using our

Longevity Acrylics Acrylic Bathtub & Shower Clean & Shine:

• It will gently clean all acrylic surfaces without scratching

• Leaves a lustrous shine that resists fogging, repels dust, and

eliminates static

• Resist ﬁnger marking

• Contains no abrasive or harsh chemicals

• Leaves a clean smooth, greaseless shine

If using a household cleaner, make sure it is recommended for

use on acrylic by the manufacturer. Be sure to read the label

and follow the cleanser’s recommendations. Never use abrasive

cleaners.

Every effort has been made to offer the most current, correct, and clearly expressed information possible. Nevertheless, inadvertent errors or inaccuracies in the information may occur.

Longevity Acrylics disclaims any responsibility for errors or accuracy of information that may be contained in its documents or web pages. Longevity Acrylics Inc. makes no warranties or

representations whatsoever regarding the quality, content, completeness, suitability, adequacy, sequence, accuracy or timeliness of such information and data.

FRAMING —

RECTANGULAR

BATHTUB

B A

FRAMING — CORNER BATHTUB

LOCATION FOR THE SCREWS

Every effort has been made to offer the most current, correct, and clearly expressed information possible. Nevertheless, inadvertent errors or inaccuracies in the information may occur.

Longevity Acrylics disclaims any responsibility for errors or accuracy of information that may be contained in its documents or web pages. Longevity Acrylics Inc. makes no warranties or

representations whatsoever regarding the quality, content, completeness, suitability, adequacy, sequence, accuracy or timeliness of such information and data.

Do not allow your Longevity bathware surface to come

into contact with products such as ketones or esters such as

acetone or ethyl acetate (nail polish remover), Wintergreen

oil (methyl salicylate), nail polish, dry cleaning solution or

other chlorinated organic solvents, lacquer thinners, gasoline,

aromatic solvents, pine oil, etc.

Remove dust and dry dirt with a soft, damp cloth. Clean grease,

oil, paint and ink stains with isopropyl (rubbing) alcohol. Dry

with a clean, soft cloth.

Avoid using razor blades or other sharp instruments that might

scratch the surface.

If you use a rubber or plastic anti-skid mat, make sure to remove

it after every shower to avoid harming the surface ﬁnish.

TABLE 1 - TECHNICAL DATA

Model# A

Wide

Long

High

Drain

Location

DrainBack

DrainEnd

7236 36" 72" 20" END DRAIN 18" 8½"

7234S 34" 72" 20" END DRAIN 17" 8"

6036 36" 60" 19" END DRAIN 16½" 8½"

6032S 32" 60" 20" END DRAIN 16" 8"

6032A 32" 60" 18½" END DRAIN 16" 8"

6032 31½" 60" 20" END DRAIN 16" 8½"

6063C 60" 60" 20" CENTER DRAIN 42" 11½"

5454C 54" 54" 20" CENTER DRAIN 38" 12"

INSTALLATION GUIDELINES — SPA SYSTEMS

• If you are ordering a combination system (air massage system/

hydro massage system/mini lateral system), you must order the

optional access panel, and there must be an additional access

point for the blower (models 6032S, 7234S, 2170, 2060).

• If you are installing a combination system (air massage system

& hydro massage system/mini lateral system), the optional

access panel only gives you access to the motor (hydro massage

system). You cannot access the blower through the optional

access panel.

• When ordering a combination system a 3' extension kit is

available so that the blower can be installed in a remote area.

• If you are installing a combination system (air massage

system & hydro massage system/mini lateral system),

you need an additional 6" behind the ﬂange of the tub to

accommodate both systems (headrest end).

• If you are installing only the air massage system, or only the

hydro massage system no additional space is required behind

the ﬂange of the tub (headrest end).

Ce manuel convient aux modèles suivants

Autres manuels Longevity Baignoire

Longevity

Longevity 6634QDS Manuel utilisateur

Manuels Baignoire populaires d'autres marques

Agua

Agua BARTOLI-66 Manuel utilisateur

PAA

PAA PRELUDE Manuel utilisateur

BETTE

BETTE SILHOUETTE Manuel utilisateur

Kohler

Kohler K-820-GC Guide de démarrage rapide

American Standard

American Standard Whirlpool/Bathing Pool 2748.XXXW Manuel utilisateur

Oliveri

Oliveri Naples Manuel utilisateur

Lyons

Lyons Elite ETLxx663219 Series Manuel utilisateur

Woodbridge

Woodbridge BJ500 Instructions de montage

Whirlpool

Whirlpool Ariel ARL-702 Manuel utilisateur

TEIKO

TEIKO EXCELLENT DUO Manuel utilisateur

American Standard

American Standard Colony 5-1/2' x 32" Manuel utilisateur

American Standard

American Standard 3052OD.X0X Guide de démarrage rapide

Kohler

Kohler K-1111-H2 Guide de démarrage rapide

agape

agape MARSIGLIA AVAS1075 Manuel utilisateur

Kohler

Kohler K-1151 Instructions de montage

Kohler

Kohler K-1158 Guide de démarrage rapide

Kohler

Kohler K-1244 Instructions de montage

Kallista

Kallista P50045-G5 Instructions de montage