LOKITHOR J402 Manuel utilisateur
LOKITHOR
J402
LOKITHOR J402
User Manual
Contents
1. Product Overview ………………………………………………….3
2. What is includ ……………………………………………………...3
3. Operation Process ...................................................................4
3.1 User Interface ....................................................................4
3.2 How to wake up the product ..............................................4
3.3 How to use the car Jumpstart function ..............................5
3.4 How to use the voltmeter function ......................................6
4. Parameter Specifications ..........................................................6
5. Product Charging Method ........................................................7
6. Use USB-A to charge your phone ............................................7
7. LED Light Function ....................................................................8
8. Troubleshooting .........................................................................8
9. Safety Instructions ..................................................................10
10. Precautions ...........................................................................11
11. Handling and Recycling ....................................................12
12. Warranty .............................................................................12
Product Overview
Function Description
1
Jumpstart output
6
LED light
2
LED light power button
7
Display screen
Function Description
3
Red light
(Abnormal alarm indicator)
8
Green light
(flashing during emergency start, the
light keeps on during forced start)
4Power-on wake-up button
9
USB-C Output/Input（100 W Max）
5
DC Input（60W Max）
10
USB-A Output（18W Max）
What is included?
What is
included?
Product unit, Jumpstart clamps, 12V adapter, USB-C to USB-C cable
USB-A to USB-A cable, User manual
1.
Display Interface Description
Operation Process
Description Description
1Fast charge indicator 2Charging indicator
3 USB-A/USB-C output indicator 4Jumpstarter connection
abnormal indicator light
5 Abnormal temperature indicator 6 Digital display area
7Voltage indicator 8 Battery indicator
2.
How to wake up the Product
Short press button or LED power button to wake up the product
3. How to Use the Car Jumpstart Function
3.1 Method one: Normal jumpstart
3.1.2 Connect the positive and negative of the product clamps to the
positive and negative of the car battery respectively, and make
sure the connection is good;
3.1.3 Wake up the product, short press the "LED light" button or short
press the "Switch" button, if the connection is good, the green light on
the display panel will be on and flashing, and the positive and negative
voltages of the startup power supply in parallel with the car will be
displayed at the same time. The car can be started at this time;
3.1.4 If the car starts successfully, the product will automatically turn
off the power output of clamps;
3.1.5 In most cases, the vehicle will start successfully at the first
start operation. Some vehicles may need to be connected to the
Jumpstarter for 30~120 seconds (At this time, the product will
recharge the car battery) to start the operation. If the vehicle does
not start immediately , please wait 20-30 seconds, then try again, no
more than 5 consecutive starts within 15 minutes;
3.1.6 After use, please remove the clamps, long press the
"Power" button for 2 seconds to shut down, if the product is not
operated for 60 seconds, the product will shut down automatically.
3.2 Method two: Force Start
(Safety reminder: Some safety protection mechanisms in this mode are
invalid and need to be used with caution. Be sure to
prevent the positive and negative from being connected together to
cause a short circuit, otherwise it will lead to product damage, sparks,
and other more serious consequences. You must check before operation
manual)
3.1.2 When the normal start function fails, for example: the
voltage of the car battery is very low (the voltage is less than 1V), you
can use the forced emergency start function after checking the
operating manual.
3.2.2 Step 1: Insert the Clamps cable connector into the EC8
jumpstart output port of the product.
3.2.3 Step 2: In the power-on state, long press the "Power-on +
LIGHT" button for 3 seconds to enter the forced start mode. At this
time, the green light on the main interface will be on, indicating that
the jumpstart output is turned on. At this time, prevent the positive
and negative from being connected together to cause a short
circuit; (In this mode, it is required to turn on the forced start function
first, and then connect the clamps to the car battery, otherwise
the output cannot be turned on).
3.2.4 Step 3: Connect the positive and negative of the clamps to the
positive and negative of the car battery respectively (there will be a slight
spark during the connection process, which is normal), and make sure
that the connection is good. At this time, the product display screen will
display the voltage of the jumpstarter in parallel with the car battery, and
the car can be started;
3.2.5 Short press the "Power" button to exit force start mode.
4.
How to Use the Voltmeter Function
4.1 Connect the clamps to the product EC8 jumpstart output port.
4.2 Connect the positive and negative of the clamps to the positive
and negative of the car battery respectively, and make sure the
connection is good;
4.3 At this time, the green light on the main interface will flash, and the
voltage of the Jumpstarter in parallel with the car battery will be
displayed. After entering the start mode, if you want to only check the
voltage of the car battery, short press the "Power" button to exit the start
mode, the Jumpstarter will enter the measurement mode, and then the
"green light" will go out, and the display only shows the voltage value of
the car battery.
4.4 Disconnect the jumpstarter clamps from the car battery and exit the
voltmeter function mode.
Product Specifications
Capacity：88,8 WH Battery chemistry：Lithium-Ion
Starting voltage：12V Peak current：3000A
Jumpstarter clamps：RED（+） BLACK（-） Charging temperature ：0℃~45℃
Storage temperature：-20℃~50℃ Operating temperature：-20℃~50℃
Output USB-A 5V/3A,9V/2A,12V/1.5A(18W MAX)
USB-C:5V/3A,9V/3A,12V/3A,15V/3A,20V/5A(100W MAX)
Input: DC 12V/5A (60W MAX)
USB-C:5V/3A,9V/3A,12V/3A,15V/3A,20V/5A(100W MAX)
Luminous flux：300Lumens IP Code：IP65
How to Charge
Ready to charge: power adapter that supports PD protocol, USB-C To USB-
C cable Cigarette lighter plug to DC wires;
Two Charging Ways：
1. Using the USB cable to connect the power adapter with USB-C charging
port of the product
2. Using the cigarette lighter plug to DC wires to connect the car cigarette
lighter and DC input port of the product. The battery indicator on the screen
is on in marquee, the IN icon is on, indicating that the product is charging
normally,if the FAST symbol is on means fast charging. When the power of
the product is exhausted or in the case of low power, please charge it in time
to prevent abnormal battery undervoltage. Long-term zero battery state may
cause the product to fail to charge.
Charge Your Phone with USB-A
Ready to charge your phone:USB-A To USB-C cable, mobile phone (if the
mobile phone supports 9V2A of QC3.0 protocol, it can support 9V2A fast
charge). Connect the A port of the USB cable to the product, and the C port
to the Type-C charging port of the mobile phone. After the charging is
successful, the "OUT" icon of the product flashes (Note: When the USB-C
output is used alone to charge the electrical device successfully, the OUT
icon flashes, When USB-C and USB-A are outputting at the same time, the
OUT icon will light up).
· 1. Press the "LED light control" button for 1 second, the LED light will
turn on
2. Short press the "LED light control" button to switch modes: light,
strobe, SOS, off
3. Press the "LED light control" button for 2 seconds to turn the LED
light off
NO Error
code
Code Explanation Cause / Solution
1100 Voltage error Return to factory for repair
2 110 Over-voltage
protection
Discharge the battery
3 150 Over temperature
protection
Wait for the device to cool down
4 160 Low temperature
protection
Low temperature environment which
need to increase the temperature
LED Light Function
Troubleshooting
5 170 temperature
error
Temperature environment too high/
low/NTC disconnection or short
circuit
6 200 Product
problem
Needs to be returned to the
factory for repair
7 310
Charge and
discharge short
circuit
Reboot
device
8 320
Charge/
discharge
overcurrent
Restart the device
9 410
Undervoltage
protection
during jumping
start
Connect the charger
10 411
Undervoltage
protection
before
Jumping start
Connect the charger
11 420
Start over
temperature
protection
Wait for the device to cool down
12 430
The external
battery voltage is
greater than the
device voltage
1. If the displayed voltage is lower
than 12V, the device voltage is low,
please connect the charger to
supply power.
2. If the displayed voltage is higher
than 12V, the car battery is normal;
or the car battery voltage is too high,
which is not suitable for this product.
Please use an igniter that supports
higher voltage.
13 440
Clamps
reversed
connected
Connect the car battery correctly
14 450 Short circuit
when started
Restart the device
15 470
Voltage
difference
protection
before starting
Return to factory for repair
16 480 Continuous start
protection
Wait 30 seconds to start again
Please read the
User Manual
carefully before using the LOKITHOR J402
multi-function startup power supply:
1. Please operate in strict accordance with the instructions, improper
operation may lead to serious safety accidents.
2. The starting power supply is only used to start the 12V engine, and
cannot start vehicles that exceed the specified displacement or exceed
the specified voltage (12V).
Safety Instructions
3. Forced start mode, in this mode, part of the safety protection
mechanism is invalid. Please use with caution, be sure to prevent short
circuit to connect wrong with positive and negative poles, otherwise it may
cause accident. Please check the operating instructions carefully before
operation.
4. In order to prolong the service life of the internal battery, please charge
the device in time when you get it, and charge and discharge the device
every three months to ensure that the starting power is in good condition
for the next use.
5. Do not use the product that has been excessive shocked, dropped or
other forms of damage
6. Do not disassemble the product. Please contact professional
maintenance personnel to repair and handle the abnormal product.
7. Do not use the product to start the vehicle while the product is in
charging.
8. Be careful during operation to avoid metal tools falling on product
interface (it may cause short circuit, equipment damage and explosion).
9. When using the product, ensure that the surrounding area of the
starting power supply is well ventilated.
Table des matières
Autres manuels LOKITHOR Démarreur à distance
