LMI Technologies MikroCAD premium Manuel utilisateur
Quick Start Guide
15230-01.01_MANUAL_Quickstart_MikroCAD_premium13x10_revB
MikroCAD
premium 13 x 10
2
Getting Started with the MikroCAD 3D Scanner
Congratulations on purchasing a MikroCAD 3D Scanner. This quick start guide provides you with
the resources to get you started on 3D scanning.
Downloading the Software
You can download the MikroCAD installer at http://lmi3d.com/support/downloads/mikrocad.
If you purchased the MikroCAD software (Standard or Professional), download
14471-x.x.x.x_SOFTWARE_MikroCAD_Standard_Professional.exe.
If you purchased only the scanner, download
14470-x.x.x.x_SOFTWARE_MikroCAD_Scan.exe.
Customer Support
If you have any installation issues, please contact:
AMERICAS
LMI Technologies (Head Oce)
Vancouver, Canada
+1 604 636 1011
EMEAR
LMI Technologies GmbH
Berlin, Germany
+49 (0)3328 9360 0
ASIA PACIFIC
LMI (Shanghai) Trading Co., Ltd.
Shanghai, China
+86 21 5441 0711
LMI Technologies has sales oces and distributors worldwide. All contact information is listed at
lmi3D.com/contact/locations.
3
Hardware Included with Your MikroCAD Scanner
Number Description
1 3D Scanner and stand
2 Calibration kit
3 Cable
4 Power supply
5MikroCAD software dongle (separate purchase; required for using measurement
tools)
When you receive your MikroCAD 3D scanner, check that all components are included:
IMPORTANT! The FireWire adapter of the computer you use with the MikroCAD scanner must
be able to provide 8-36 VDC and 2.75 W. Because most laptops do not provide power over IEEE
1394 (FireWire), you may need to provide external power if you are using a laptop. Refer to
pages 67 and 68 in AW00061108000_Install and Setup Guide pylon Windows.pdf for
information on possible laptop configurations (FireWire B only).
IMPORTANT! The scanner has been tested with a Point Grey Research FireWire card (part
number FWB-PCIE-02).
1
5
4
2
4
Cable Description
Power
supply
connector
Cable
connector
18-pin
connector
USB plug
FireWire B
connector
(PC-side)
FireWire B
connector
(scanner-side)
Refer to the cable description when connecting the cables to the MikroCAD scanner.
6
You may change the default values if you wish, but we recommend leaving .NET Runtime
4.0 selected to ensure that it is installed.
3. Click Install.
The installer installs the MikroCAD software.
7
4. Restart the computer if you are instructed to do so.
8
Installing the Projector Driver
1. Click the Start button, and in the Search programs and files field, type devmgmt.msc .
Then press Enter.
The Device Manager opens.
2. In the Device Manager, find the GFM-USB device under Other Devices.
3. Right-click the device and choose Update Driver Software...
4. In the dialog that opens, choose Browse my computer for driver software.
9
5. Browse to the folder that contains the projector driver and click OK.
By default, the driver is installed in
C:\Program Files\LMI Technologies\MikroCAD\Alligator drivers.
6. In the dialog that opens, click Next.
10
7. In the Windows Security dialog, click Install.
Windows installs the driver software.
Autres manuels pour MikroCAD premium
1
Table des matières
Autres manuels LMI Technologies Scanner
LMI Technologies
LMI Technologies FocalSpec Manuel utilisateur
LMI Technologies
LMI Technologies Gocator 1300 Manuel utilisateur
LMI Technologies
LMI Technologies HDI Advance Manuel utilisateur
LMI Technologies
LMI Technologies Gocator 2075 Manuel utilisateur
LMI Technologies
LMI Technologies MikroCAD premium Manuel utilisateur
LMI Technologies
LMI Technologies MikroCAD Manuel utilisateur
LMI Technologies
LMI Technologies HDI 120 Manuel utilisateur
LMI Technologies
LMI Technologies HDI 109 Manuel utilisateur
LMI Technologies
LMI Technologies chroma+scan 24 0 Series Manuel utilisateur
LMI Technologies
LMI Technologies HDI 100 Series Manuel utilisateur
