Lippert TI-276 Manuel utilisateur

Rev: 11.29.2022 Page 1 CCD-0002269

CHASSIS PAINT

TOUCH-UP GUIDE

TI-276

FRAMES AND CHASSIS

Preparation

Purpose

The purpose of this document is to illustrate the proper way to touch-up paint on a chassis. Figure 1 shows a

section of the frame before this procedure. Figure 2 shows that same section of the frame after this procedure.

Fig. 1 Fig. 2

NOTE: The paint required for frame touch-ups is PN 2022001419 - Spray Paint - Anthracite Black Texture

Aerosol - 15oz. can

Compressed air can cause particles and debris to fly back into the face, eyes, ears, nose and mouth,

causing skin irritation and/or damage to sensitive tissue and airways. Use proper personal protective

equipment (PPE), such as safety goggles, gloves and full face shield at a minimum, when cleaning with

compressed air. Make sure other personnel in the work area are similarly and adequately protected.

1. Power wash frame at a minimum of 2300 PSI to remove dirt and debris.

NOTE: Hand-wash frame if power washer is not available. Use stiff bristle brushes, rags and sponges as

necessary to remove dirt and debris.

2. Let frame dry completely.

NOTE: Remove underbelly after drying, if applicable.

3. Use a hand wire brush to take down any heavy rust or scaling.

4. Use a rope wheel or knotted wheel around webbing.

5. Use a flat knot wheel around jointed areas near outriggers or anything welded to the I-beam or tubing.

NOTE: Lippert recommends 8500 rpm maximum operating speed if using an electric grinder.

NOTE: Lippert recommends 7K-12K rpm maximum operating speed if using a pneumatic grinder.

6. Use wire wheels to strip rust, scale, dirt and debris from other surfaces. Optionally, 27-grit stripper disks

may be used.

Rev: 11.29.2022 Page 2 CCD-0002269

TI-276

FRAMES AND CHASSIS

CHASSIS PAINT

TOUCH-UP GUIDE

As a supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are

our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at

[email protected]

Self-help tips, technical documents, product videos and a training class schedule are available at

lippert.com

or by downloading the LippertNOW app.

Instructions

Frame Painting

1. Chassis and Bumper Application: Paint frame required touch-up spray paint.

2. Let unit set until all painted areas are completely dry.

Overspray or dripping of paints and solvents onto an unprotected floor can create a slip hazard. Slipping

on wet surfaces can cause personal injury. Use a drop cloth or other, similar protective material on the

work area to prevent slipping.

7. After grinding, use compressed air to blow loose debris from around the area.

A. Use an air nozzle that is equipped with chip guards or provide an air curtain around the nozzle to

reduce fly back.

B. Nozzle shall be regulated to 30 psi maximum.

8. Make sure to lay a drop cloth or similar protective material under surfaces of work area to prevent

dripping or spills.

9. Wipe down affected surfaces with brake cleaner or lacquer thinner.

10. Use cardboard or heavy paper to prevent overspray.

11. Make sure to use primer before all paint applications. Apply primer after cleaned areas have

completely dried.

Table des matières

Autres manuels Lippert Accessoires automobiles

Lippert

Lippert RV ENTRY DOOR Manuel utilisateur

Lippert

Lippert Curt 60654 Manuel utilisateur

Lippert

Lippert THEATER SEATING Manuel d'utilisation et d'entretien

Lippert

Lippert Vela Pop Up Manuel utilisateur

Lippert

Lippert Kwikee Step Well Cover Manuel utilisateur

Lippert

Lippert Power Step 2.0 Manuel utilisateur

Lippert

Lippert 2000 Series Manuel utilisateur

Lippert

Lippert SMART BED UNIVERSAL KIT Manuel utilisateur

Lippert

Lippert LUVERNE 401720 Manuel utilisateur

Lippert

Lippert CURT 45937 Manuel utilisateur

Lippert

Lippert Tire Linc 2020106863 Instructions d'installation

Lippert

Lippert Level-up Manuel utilisateur

Lippert

Lippert 2021000090 Instructions d'installation

Lippert

Lippert SolidStep Gen 2 Instructions d'installation

Lippert

Lippert Curt 18110 Manuel utilisateur

Lippert

Lippert OneControl Manuel utilisateur

Lippert

Lippert VELA POP-UP ROOF Manuel utilisateur

Lippert

Lippert 45940-85 Manuel utilisateur

Lippert

Lippert Promaster Manuel utilisateur

Lippert

Lippert Power Steps 2.0 Manuel utilisateur

Lippert

Lippert Curt 16613 Manuel utilisateur

Lippert

Lippert Stargazer Nano Wide Skylight Manuel utilisateur

Lippert

Lippert Thule 5200 Manuel d'utilisation et d'entretien

Lippert

Lippert Project 2000 Sliding Step Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur