Lippert CURT 45937 Manuel utilisateur

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •45937-INS-RA •08/09/2022 •ECN9781 •PAGE 1

Maintenance

Mild automotive detergent may be used to

clean the product. Do not use dish detergent,

abrasive cleaners, abrasive pads, wire

brushes or other similar products that

may damage the ﬁnish.

Product Registration and Warranty

CURT stands behind our products with industry-leading warranties. To get copies of the product

warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys

Weight Capacity

Gross trailer weight (GTW) 20,000 lbs.

Tongue weight (TW) 2,000 lbs.

INSTALLATION MANUAL 45937

Tools Required

None

Product Photo

Parts List

Item Qty Description

1 1 Adjustable shank

2 1 Dual ball

3 2 Pin

4 1 Clip

Hitch pin and clip not included

Level of Difﬁculty

Easy

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of

the mount system are intended to represent the capability of the product and in no way

reflect the ratings or capacity of the towing system it is being used with. The consumer

or operator are strongly advised to learn the ratings of the various components of the

towing system and never exceed the limits of the lowest rated component being used.

Use of any pin other than that of the mount system manufacturer

could be a serious safety hazard and will void the warranty.

Never hook up trailer safety chains to the mount system. Ensure the safety

chains operate freely around the mount system and do not become entangled.

NOTICE

Before you begin installation, read all instructions thoroughly.

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •45937-INS-RA •08/09/2022 •ECN9781 •PAGE 2

Step 2 - Determine Required Ball Height

Determine the proper ball height by leveling the trailer and measuring

from the bottom of the trailer tongue to the ground, see below.

Find the hole closest to that measurement on the adjustable shank (#1).

The trailer ball platform (#2) will be centered on that hole.

TrailerCoupler

Channel Mount

Level Ground

Drop

Rise

Vehicle

Receiver

Tube

BALL HEIGHT

Step 1 - Insert into the Trailer Hitch

Begin by installing the shank (#1) into the trailer hitch receiver

and secure it with a hitch pin and clip (sold separately).

ASSEMBLY & SETUP

Step 3 - Attach the Tongue

Based on the determined ball height, slide the tongue

onto the shank and align with the proper hole locations.

Angle the tongue slightly upwards and press in toward the shank.

Insert a pin (#3) into the top tongue hole first. To pin the bottom

tongue hole, apply downward force to the tongue, and slide

the second pin into place.

Note: The highest mounting position will require the bottom

pin to be installed first with the tongue angled downward.

Then, apply force upwards to install the second pin.

Secure all pins with the included clip (#4).

WARNING

The provided pins are speciﬁcally engineered for this system.

If replacement pins are needed, they must be replaced

with original factory mount pins (CURT# 45931).

Parts List

Item Qty Description

1 1 Adjustable shank

2 1 Dual ball

3 2 Pin

4 1 Clip

Hitch pin and clip not included

Autres manuels Lippert Accessoires automobiles

Lippert

Lippert Stargazer Nano Long Skylight Manuel utilisateur

Lippert

Lippert 2000 Series Manuel utilisateur

Lippert

Lippert OneControl Manuel utilisateur

Lippert

Lippert Vela Pop Up Manuel utilisateur

Lippert

Lippert Vela Manuel utilisateur

Lippert

Lippert FLYSCREEN N Series Manuel utilisateur

Lippert

Lippert ARIES S224050 Manuel utilisateur

Lippert

Lippert SolidStep 4.0 Manuel utilisateur

Lippert

Lippert THEATER SEATING Manuel d'utilisation et d'entretien

Lippert

Lippert Curt 13496 Manuel utilisateur

Lippert

Lippert Kwikee Step Well Cover Manuel utilisateur

Lippert

Lippert Project 2000 Sliding Step Manuel utilisateur

Lippert

Lippert Sway Command 1.5 Manuel utilisateur

Lippert

Lippert Level-up Manuel utilisateur

Lippert

Lippert Curt 18110 Manuel utilisateur

Lippert

Lippert Stargazer Nano Wide Skylight Manuel utilisateur

Lippert

Lippert LatchXtend RV Door Handle Manuel utilisateur

Lippert

Lippert SMART BED UNIVERSAL KIT Manuel utilisateur

Lippert

Lippert Tire Linc 2020106863 Instructions d'installation

Lippert

Lippert JT's Strong Arm Instructions d'installation

Lippert

Lippert 10570 Manuel d'instructions

Lippert

Lippert Vela Pop Up Manuel d'utilisation et d'entretien

Lippert

Lippert LUVERNE 401720 Manuel utilisateur

Lippert

Lippert Curt 18415 Manuel utilisateur

Manuels Accessoires automobiles populaires d'autres marques

James Baroud

James Baroud Odyssey Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuel utilisateur

Feniex

Feniex T3 Manuel utilisateur

Renault

Renault 77 11 423 180 Manuel utilisateur

Kia

Kia E8300-4D000 Manuel utilisateur

Brink

Brink 756843 Manuel utilisateur

Whispbar

Whispbar K085W Manuel utilisateur

v.link

v.link CI-VL2-PC-HSD Manuel utilisateur

Viking

Viking Stack-Rack Guide de configuration rapide

Aries

Aries 203015 Manuel utilisateur

Choetech

Choetech AT0005 Manuel utilisateur

ZZ2

ZZ2 ZZAIR-PRO Manuel utilisateur

Holman

Holman 4A80L Manuel utilisateur

Thule

Thule 2075 Manuel utilisateur

Motorola

Motorola T325 Manuel utilisateur

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guide d'installation

DV8

DV8 FBJL-02 Manuel utilisateur