Lippert Components 2021130659 Instructions d'installation

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert™Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

Table of Contents

Introduction ............................................ 2

Safety ................................................... 2

Parts List ................................................ 2

Resources Required ................................... 2

Installation .............................................. 3

Install OneControl Application ......................... 3

Operation ............................................... 3

Pairing OneControl app with Temperature Sensor .... 3

Usage Set-up .......................................... 5

Setting Negative Temperature for Android Devices ... 6

Physical Installation of Sensor in Refrigerator ......... 7

Understanding Intelligent Alerts and Notications ..... 8

Battery Information .................................... 9

Resources Required ................................... 9

Troubleshooting ...................................... 11

Maintenance .......................................... 11

Changing Temperature (Fahrenheit to Celsius) ...... 11

Know Bluetooth Range .............................. 11

Unpairing Sensor .................................... 11

Notes .................................................. 12

Lippert

Temperature

Sensor

Installation and

Owner’s Manual

(For Aftermarket Applications)

Lippert Temperature Sensor KitLippert Temperature Sensor Kit

Kit #Kit # DescriptionDescription

2021130659 Lippert Temperature Sensor

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

Introduction

Keep an eye on the RV’s fridge and freezer with real-time

updates using the Lippert Temperature Sensor. Using

OneControl®technology, wireless sensors monitor the

RV’s fridge and freezer while traveling and camping.

Monitor up to four sensors simultaneously on a

smart device.

Designed with a unique, out-of-the-way mounting feature,

simply place the sensor on the inside wall of a refrigerator.

This saves space inside the fridge and keeps the sensor

stable in one place.

Additional information about this product can be obtained

from lci1.com/support or by using the LippertNOW app.

Replacement kits can be ordered from https://store.lci1.

com/ or by using the LippertNOW app.

The LippertNOW app is available for free on Apple App

Store®for iPhone®and iPad®and also on Google Play™for

Android™users.

App Store®and iPad®are registered trademarks of

Apple Inc.

Google Play™and Android™are trademarks of Google Inc.

Safety

Read and fully understand all instructions before installing

or operating this product.

Adhere to all safety labels.

FOLLOW BATTERY WARNING INFORMATION OR

SEVERE PERSONAL INJURY MAY OCCUR.

Lippert™ Temperature Sensor Kit - 2021130659Lippert™ Temperature Sensor Kit - 2021130659

LetterLetter PNPN DescriptionDescription QtyQty

A2021126939 Lippert Temperature Sensor 1

Parts List

NOTE: Part numbers are shown for identification purposes

only. Not all parts are available for individual sale. All parts

with a link to the Lippert Store can be purchased.

Resources Required

• OneControl App

• Cloth to wipe refrigerator

or cooler

KEEP BATTERIES AWAY FROM CHILDREN.

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

Operation

Pairing OneControl app with Temperature Sensor

1. Turn on the sensor: press and hold the large button on

the back until the green LED light turns on. When the light

turns o󰀨, the sensor is now on and ready for pairing.

2. Open the app and look for the “+” on the top of the

screen (Fig.2A).

3. Tap the “+” and navigate to Add and Manage page.

4. At the Add and Manage page, tap sensor (Fig.3A) and

follow the directions queued in the app.

Fig.1

Installation

Install OneControl Application

The sensor requires the OneControl app from Lippert.

• For iOS users, visit the Apple App Store (link).

• For Android users, visit the Google Play store (link).

NOTE: Make sure the smart device is connected to the

Internet and Bluetooth is ON.

1. Search for “OneControl” (Fig.1) in the app store

supported by the smart device.

2. Download the OneControl app to the smart device and

follow the prompts for setting up a new account or logging

in to an existing account.

NOTE: The sensor requires OneControl V5.0 or higher.

Sensors will also work with Compass Connect, Lippert

Connect or OCBT apps provided the versions are V5.0

or higher. To use it on an Apple phone, you will need

an iPhone 8 or higher running iOS Version 13 or higher.

If you have an Android phone, it will need software version

8 or higher.”

Fig.3

Fig.2

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

6. Press and hold the large button on the back of the

sensor (Fig.5A) until the green LED begins ashing. The

sensor is now in pairing mode. When the OneControl

app makes contact with the sensor, it will be paired

automatically.

Fig.4

7. When paring is complete, you will see a conrmation

message (Fig.6).

Fig.5

NOTE: The pairing window times out at 60 seconds. If the

pairing process times out, repeat the process. To ensure

success, make sure the smart device is on, its Bluetooth

is on and its location or location permissions are on. In the

app, make sure permission have been granted and the

sensor and phone are next to one another.

NOTE: Keep the smart device near the sensor during

pairing procedure. The sensor communicates via

Bluetooth. Bluetooth range varies and can be limited

by obstructions, like an RV’s walls or being inside a

refrigerator or freezer.

5. Accept any permission requests that appear on your

smart device screen (Fig.4).

Fig.6

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

The sensor operates between -20°F and 140°F.

If threshold selection exceeds the high temperature range,

the user will receive the following alert (Fig.8)

Fig.7

Usage Set-up

Once OneControl and the senor are paired and

communicating via Bluetooth, the sensor can be set up

within the app.

1. Choose a name for the sensor from the name list (Fig.7A)

to help distinguish what sensor is being measured.

Fig.8

2. Select your temperature threshold (Fig.7B). You may

adjust the temperature to suit other applications, like

freezers or rooms. Alerts are sent if temperature exceeds

thresholds and when it returns to normal.

3. After set up selections have been made, tap CONTINUE

(Fig.7C) to save selections.

NOTE: Sensors may not send alerts if they sense a rapid

and brief rise in temperature, like when loading or removing

food from a fridge.

B B

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

Setting Negative Temperature for Android

Devices

When the number pad is present on the smart device

screen, double tap the “.-” button (Fig.10A). Tapping once

will enter a ‘.’ but tapping twice will enter the ‘-’ for negative

temperatures.

If threshold selection exceeds the low temperature range,

the user will receive the following alert (Fig.9).

Fig.9

Fig.10

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

To save your selections, press Apply (Fig.11B). You will be

taken to the OneControl homepage. Scroll down to see

your sensor (Fig.12).

Fig.13

Some smart devices may, by default, have notifications

turned off. OneControl will let you know if they need to be

turned on (Fig.11A).

Physical Installation of Sensor in Refrigerator

The sensor can now be mounted.

1. Locate a spot on the refrigerator or freezer wall near the

door (Fig.13A).

Fig.11

Fig.12

NOTE: Confirm the door will close without interference

from the sensor.

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

Understanding Intelligent Alerts and Notifications

Now that the sensor has been paired, customized and

installed, OneControl will begin to send push notifications

to the smart devices when temperature thresholds have

been breached or if the battery is low.

Notifications are sent via Bluetooth. From most RV

refrigerators, the range is about 40 feet. To determine the

range, walk away from the sensor and open the app at

various distances (Fig.16). The app may take up to a minute

to sync with the sensor.

By monitoring the rate and time of temperature changes,

the sensor’s intelligent monitoring system avoids

unnecessary alerts during normal use.

Thresholds can be adjusted anytime in the OneControl app

and when in Bluetooth range of the sensor.

The sensor’s alert thresholds are preset for typical RV

refrigerators (30°F to 46°F). Alerts are sent if temperature

exceeds thresholds and when it returns to normal.

To pair another Sensor, return to the OneControl home

page, press the “+” and repeat the process.

Fig.15

4. Attach to the clean surface (Fig.15).

5. Close the door. You will receive a notication when the

refrigerator or freezer reaches your desired temperature

threshold.

NOTE: By removing the post, you may hang the sensor

anywhere you want; such as rooms, cargo areas and

more.

Fig.16

NOTE: Adhesive is intended for durable plastic and metal

surfaces. It is not recommended for fabric, wallpaper or

painted surfaces.

2. Clean the desired location where the sensor will be

mounted. Remove any debris or moisture.

3. Remove the seal from the adhesive pad (Fig.14A),

Fig.14

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

Battery Information

Follow battery warning information and the warnings in

this manual. The sensor comes with a BR-2450 coin cell

battery. This battery is rated for refrigerators and freezers.

NOTE: If only used in a refrigerator or to measure

temperature in a room, a CR-2450 battery can be used.

Only use new batteries and of identical type. Do NOT:

• Throw batteries into water.

• Throw batteries into fire

• Short-circuit batteries.

• Open or disassemble batteries.

WHEN HEATED ABOVE 100 °C (212 °F) THE RISK OF

RUPTURE OCCURS. A RUPTURED BATTERY CAN

EXPOSE ITS CAUSTIC CONTENTS TO EYES, LUNGS

AND SKIN CAUSING SEVERE PERSONAL INJURY.

IF EXPOSED TO BATTERY CONTENTS, SEEK

IMMEDIATE MEDICAL ATTENTION.

Resources Required

• BR-2450 or CR-2450

battery (depending)

• Small, at-head

screwdriver

NOTE: Complete removal of the sensor should not be

necessary. The best practice is to NOT remove where the

sensor is adhered and keep adhesive attached.

1. Pull the senor out of the mounting rubber band (Fig.17).

2. Locate the slot on the bottom corner of the Temperature

Sensor (Fig.18A) Insert a small, at-head screwdriver and

twist to open.

Fig.17

Fig.18

NOTE: Instead of a screwdriver, a slim coin can be used.

3. The sensor will pop open like a clamshell (Fig.19).

Fig.19

USE CARE WHEN REMOVING OR INSERTING

THE BATTERY. DO NOT USE SHARP OBJECTS

TO REMOVE, INSERT OR HANDLE THE BATTERY.

SHARP OBJECTS CAN CAUSE DAMAGE TO THE

BATTERY THAT MAY RESULT IN ITS RUPTURING. A

RUPTURED BATTERY CAN EXPOSE ITS CAUSTIC

CONTENTS TO EYES, LUNGS AND SKIN CAUSING

SEVERE PERSONAL INJURY. IF EXPOSED TO

BATTERY CONTENTS, SEEK IMMEDIATE MEDICAL

ATTENTION.

lippert.com 432-LIPPERT (432-547-7378) Rev: 06.01.22

Lippert Temperature

Sensor

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004546

4. Lift out the sensor platform and slide out the old

battery (Fig.20).

5. Install the new battery (Fig.21).

NOTE: Make sure the positive side of the battery faces up.

6. Put the platform into the transparent tray (Fig.22).

Fig.21

Fig.22

Fig.23

Fig.24

7. Snap the top of the sensor body back into place (Fig.23).

NOTE: If the sensor was On/Sleep mode before battery

was replaced, the sensor will return to that mode when

the new battery is installed. If the sensor was Off before

replacing the battery, then it will be necessary to turn on

the sensor and complete the install/set-up process.

Fig.20 8. Open the app and wait until the app and the sensor sync.

NOTE: Lithium button cell batteries are classified by the

U.S. federal government as non-hazardous waste and

are safe for disposal in normal municipal waste systems.

Lithium button cell batteries are classified differently in

other countries wherein battery disposal must follow in

accordance with their respective local laws.

9. Return the sensor back to the rubber band (Fig. 24).

Table des matières

Autres manuels Lippert Components Accessoires

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera Slide Topper with Access Plates Instructions d'installation

Lippert Components

Lippert Components Solera Slide Topper Instructions d'installation

Lippert Components

Lippert Components Solera TI-278 Instructions d'utilisation et d'entretien

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera 434718 Manuel utilisateur

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera Instructions d'installation

Lippert Components

Lippert Components Solera Smart Arm Instructions d'installation

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera 674282 Instructions d'installation

Lippert Components

Lippert Components Solera 795354 Instructions d'installation

Lippert Components

Lippert Components Solera Classic Manuel utilisateur

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera Classic Instructions d'installation

Lippert Components

Lippert Components Solera Instructions d'installation

Lippert Components

Lippert Components Edge Awning Manuel utilisateur

Lippert Components

Lippert Components SURESHADE ATF Guide de démarrage rapide

Lippert Components

Lippert Components Solera 3000WS Series Manuel utilisateur

Lippert Components

Lippert Components Solera Smart Arm Manuel utilisateur

Lippert Components

Lippert Components Solera Manuel utilisateur

Lippert Components

Lippert Components Solera Hybrid Manuel utilisateur

Lippert Components

Lippert Components Solera Power Awning Manuel utilisateur

Lippert Components

Lippert Components Solera Classic Awning Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur