LINOVISION IOT-C300-4G Manuel utilisateur

IOT-C300-4G

IOT Controller

Quick Start Guide

Updated on May18,2022

Safety Precautions

Linovision will not shoulder responsibility for any loss or damage resulting from not following

the instructions of this operating guide.

❖The device must not be remodeled in any way.

❖Do not place the device close to objects with naked flames.

❖Do not place the device where the temperature is below/above the operating

range.

❖Power off the device when installing or wirings.

❖Make sure electronic components do not drop out of the enclosure while

opening.

❖The device must never be subjected to shocks or impacts.

Declaration of Conformity

IOT-C300-4G is in conformity with the essential requirements and other relevant provisions

of the CE, FCC, and RoHS.

All information in this guide is protected by copyright law. Whereby, no organization or

individual shall copy or reproduce the whole or part of this user guide by any means

without written authorization from Hangzhou Linovision Technologies Co.,Ltd.

For assistance, please contact

Linovision technical support:

Email: sales@hinovision.com

Tel: +1(469)-444-2999

URL:support.linovision.com

Address: 701 E Plano Parkway, Ste 100

Plano, Texas, 75074

U.S.A

Contents

1. Product Introduction.....................................................................................................................................4

1.1 Overview.................................................................................................................................................. 4

1.2 Features....................................................................................................................................................4

2. Hardware Introduction.................................................................................................................................4

2.1 Packing List ........................................................................................................................................... 4

2.2 Hardware Overview............................................................................................................................5

2.3 Application Wiring..............................................................................................................................5

2.4 LED Indicators....................................................................................................................................... 6

2.5 Reset Button..........................................................................................................................................7

2.6 Dimensions (mm)..................................................................................................................................7

3. Hardware Installation ................................................................................................................................... 7

3.1 SIM Installation (Cellular Version Only).....................................................................................7

3.2 Antenna Installation............................................................................................................................ 7

3.3 Device Installation................................................................................................................................8

3.3.1 Wall Mounting...........................................................................................................................8

3.3.2 DIN Rail Mounting...................................................................................................................8

4. Operation Guide.............................................................................................................................................9

4.1 Log in the ToolBox..............................................................................................................................9

4.2 Communication Settings................................................................................................................11

4.2.1 Cellular & Application Settings (Cellular Version Only) .........................................12

4.2.3 SMS Settings (Cellular Version Only)...........................................................................15

4.3 Data Interface Settings.................................................................................................................. 17

4.3.1 Basic Settings ......................................................................................................................... 17

4.3.2 Digital Input/Pulse Settings..............................................................................................17

4.3.3 Digital Output Settings.......................................................................................................18

4.3.4 RS485 Settings........................................................................................................................18

4.3.5 RS232 Settings........................................................................................................................20

4.3.6 Analog/PT100 Settings........................................................................................................22

4.4 IF-THEN Command..........................................................................................................................23

4.5 Maintenance ........................................................................................................................................ 26

4.5.1 Upgrade.....................................................................................................................................26

4.5.2 Backup ........................................................................................................................................27

4.5.3 Reset to Factory Default...................................................................................................27

5. Device Payload...............................................................................................................................................28

1. Product Introduction

1.1 Oveiew

IOT-C300-4G is an IoT controller used for remote control and data acquisition from

multiple sensors. It contains different I/O interfaces such as analog inputs, digital

inputs, relay outputs, serial ports and so on, which support remote device data

transmission and control via 3G/4G networks or SMS. Besides, IOT-C300-4G

supports multiple trigger conditions and actions which works autonomously even when the

network drops.

1.2 Features

●Easy to connect with diverse wired sensors through DI/DO/AI/PT100/RS232/

RS485 interfaces

●Support 3G/4G wireless communication

●Multiple triggering conditions and actions

●Embedded watchdog for work stability

●Industrial metal case design with wide operating temperature range

●Compliant with standard network servers

●Quick and easy management with Linovision IoT Cloud solution

2. Hardware Introduction

2.1 Packing List

1 ×DIN Rail

Mounting Clip

4 ×Wall

Mounting Kits

4 ×Fixing Screws

1 ×IOT-C300-4G Device 1 ×Cellular

Antenna

1 ×Power

Adapter

5 ×Terminal Blocks

QuickGuide

1 ×Warranty

Card

If any of the above items is missing or damaged, please contact your sales representative.

2.2 Hardware Oveiew

2.3 Application Wiring

1 ×

Quick Start

Guide

RS485 Terminal Resistor:

DIP Switch Description

1 on 2 off 3 off Add 120 Ω resistor between A and B

1 off 2 on 3 off Add pull-down resistor on B

1 off 2 off 3 on Add pull-up resistor on A

2.4 LED Indicators

LED Indication Status Description

SYS System Status

Static On System works

Slowly Blinks Fail to acquire data from data interfaces

Static On System error

ACT Network Status

Off Not join/register to network

Blinks as Requests Send join network requests or

registering network requests

Blinks Twice→Static On Succeed to join/registerto network

Blinks Once Succeed to send uplinks

Blinks Twice Fail to send uplinks

Blinks Twice Receive downlinks

2.5 Reset Button

There is reset button inside the

device.

Function Description

SYS LED Action

Reset

Static Green Press and hold the reset button for more than 10 seconds.

Static Green →

Rapidly Blinking Release the button and wait.

O → Static Green The device resets to facto default.

2.6 Dimensions (mm)

3. Hardware Installation

3.1 SIM Installation

Release the screws and cover on the antenna connector, inse the SIM card into the slot. If

you want to take out the SIM card, press it to make it pop out.

3.2 Antenna Installation

Rotate the antenna into the antenna connector

accordingly.

The external antenna should be installed vertically always on a site with a good signal.

3.3 Device Installation

IOT-C300-4G device can be placed on a desktop or mounted to a

wall or a DIN rail.

3.3.1 Wall Mounting

1. Fix the wall mounting bracket to the device with 2 screws.

2. Drill 4 holes on the wall according to the bracket, then fix the wall plugs into the wall.

3. Fix the device to the wall plugs with screws. When installation, itʼs suggested to fix the

two screws on the top at first.

3.3.2 DIN Rail Mounting

1. Fix the mounting clip to the device with 3 screws.

You can also try below installation methods:

2. Hang the device to the DIN rail. The width of DIN rail is 3.5cm.

4. Operation Guide

4.1 Log in the ToolBox

1. Download ToolBox software from www.linovision.com

2. Power on the IOT-C300-4G device, then connect it to computer via type-C

port.

100

3. Open the ToolBox and select type as “General”, then click password to log in

ToolBox.(Default password: 123456)

4. After logging in the ToolBox, you can change device settings.

Table des matières

Autres manuels LINOVISION Matériel réseau

LINOVISION

LINOVISION NVR4104W Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur