Linksys WRT54G3GV2-VF Instructions d'utilisation d'origine

Wireless-G Router for

3G/UMTS Broadband

Model No: WRT54G3GV2-VF

QUICK INSTALLATION

Package Contents

Wireless-G Router for

3G/UMTS Broadband

Setup CD-ROM

User Guide and Quick Installation on

CD-ROM

AC Power Supply with UK, Euro, and

Australia Plug Adapters

Car Power Adapter

Ethernet Cable

•

Overview

There are two ways to set up the Router for Internet connection. Select one.

Broadband WAN and 3G/UMTS Broadband

3G/UMTS Broadband Only

Before you begin, make sure that you have the following:

Broadband WAN and 3G/UMTS Broadband

Activated 3G/UMTS broadband service from Vodafone

Vodafone 3G/UMTS broadband device service information

Broadband modem

Settings for your broadband Internet connection

3G/UMTS Broadband Only

Activated 3G/UMTS broadband service from Vodafone

Vodafone 3G/UMTS broadband device service information

Insert the Setup CD-ROM into your

CD-ROM drive. The Setup Wizard

should run automatically, and the

Welcome screen should appear. If it

does not, click your taskbar’s Start

button and select Run. In the Open

field, enter D:\SetupWizard.exe

(where “D” is the letter of your CD-

ROM drive).

Select your preferred language

from the drop down menu. To

begin installation, click the Click

Here to Start button.

•

Insert the CDInsert the CD

Click Here to StartClick Here to Start

Overview

To accept the license agreement,

click Next.

Make sure the Router is powered

off. Insert the Vodafone 3G/UMTS

Broadband Device into the Router’s

PC Card slot or USB port.

Click Next.

If you have a cable or DSL

connection, keep the screen’s

default, Yes, and then click

Next. Proceed to the section, “1

Broadband WAN and 3G./UMTS

Broadband”.

If you do not have a cable or

DSL connection, select No on

this screen, and then click Next.

Proceed to the section, “2 3G/UMTS

Broadband Only”.

Accept the License AgreementAccept the License Agreement

Insert the Vodafone 3G/UMTS Broadband

Device

Insert the Vodafone 3G/UMTS Broadband

Device

Add Another Internet ConnectionAdd Another Internet Connection

Make sure the Router is powered

off. Disconnect the network cable

from your computer. (This is the

cable that connects the computer

to your modem.)

Click Next.

Connect the cable from the

modem to the Modem port on the

Router. (This is the same cable that

you just disconnected from your

computer in step A.)

Click Next.

Connect the included yellow

network cable to the Ethernet

network port of your computer.

Click Next.

Disconnect the ModemDisconnect the Modem

Connect the Modem to the RouterConnect the Modem to the Router

Connect the Network Cable to

the Computer

Connect the Network Cable to

the Computer

Broadband WAN and 3G/UMTS Broadband1�

Broadband WAN and 3G/UMTS Broadband

Connect the other end of the

yellow cable to one of the yellow

Ethernet ports labeled 1-4 on the

side panel of the Router.

Repeat steps C and D to connect

additional computers or other

devices to the Router. (Additional

network cables are not included.)

Click Next.

Connect the power adapter to the

Router’s Power port. Plug the cord

into an electrical outlet (if needed,

attach the included, appropriate

power plug adapter).

Click Next.

The Power LED will flash for about

a minute during the self-test. It will

be solidly lit when the self-test is

complete.

If the Power LED does not stop

flashing, refer to“Appendix A:

Troubleshooting” in the User Guide

on the CD-ROM.

Click Next.

Connect the Network Cable to the RouterConnect the Network Cable to the Router

Connect to PowerConnect to Power

Check the Router’s StatusCheck the Router’s Status

Broadband WAN and 3G/UMTS Broadband

Follow the on-screen instructions to complete the setup and configuration.

NOTE: For advanced conﬁguration changes, refer to “Chapter 3:

Advanced Conﬁguration” in the User Guide on the CD-ROM.

Connect the included yellow

network cable to the Ethernet

network port of your computer.

Click Next.

Connect the other end of the

yellow cable to one of the yellow

Ethernet ports labeled 1-4 on the

side panel of the Router.

Repeat steps A and B to connect

additional computers or other

devices to the Router. (Additional

network cables are not included.)

Click Next.

Connect the power adapter to

the Router’s Power port. Plug the

other end into an electrical outlet

(if needed, attach the included,

appropriate power plug adapter).

Click Next.

Connect the Network Cable to

the Computer

Connect the Network Cable to

the Computer

Connect the Network Cable to the RouterConnect the Network Cable to the Router

Connect to PowerConnect to Power

3G/UMTS Broadband Only2�

3G/UMTS Broadband Only

The Power LED will flash for about

a minute during the self-test. It will

be solidly lit when the self-test is

complete.

If the Power LED does not stop

flashing, refer to“Appendix A:

Troubleshooting” in the User Guide

on the CD-ROM.

Click Next.

Follow the on-screen instructions to complete the setup and configuration.

NOTE: For advanced conﬁguration changes, refer to “Chapter 3:

Advanced Conﬁguration” in the User Guide on the CD-ROM.

Check the Router’s StatusCheck the Router’s Status

Notes

8041410NC-DF

Autres manuels Linksys Routeur sans fil

Linksys

Linksys WRT160NL - Wireless-N Broadband Router Manuel utilisateur

Linksys

Linksys VELOP Feuille d'instructions

Linksys

Linksys WRT54GP2 - Wireless-G Broadband Router Manuel utilisateur

Linksys

Linksys WRT150N - Wireless-N Home Router Wireless Manuel d'utilisation

Linksys

Linksys WRT300N - Wireless-N Broadband Router... Manuel utilisateur

Linksys

Linksys WRT54G3G-VN Manuel utilisateur

Linksys

Linksys RTP300 - Broadband Router With 2 Phone Ports Manuel d'utilisation

Linksys

Linksys WRT300N - Wireless-N Broadband Router... Manuel utilisateur

Linksys

Linksys E5602 Manuel utilisateur

Linksys

Linksys WRT54GC - Compact Wireless-G Broadband Router... Manuel utilisateur

Linksys

Linksys WRT150N - Wireless-N Home Router Wireless Instructions d'utilisation d'origine

Linksys

Linksys EA6300 Manuel utilisateur

Linksys

Linksys WRT54G3G - Wireless-G Router For Verizon Wireless... Manuel utilisateur

Linksys

Linksys BEFW11S4-AT Manuel utilisateur

Linksys

Linksys EtherFast BEFW11P1 Manuel utilisateur

Linksys

Linksys WRVS4400N - Small Business Wireless-N Gigabit Security... Manuel utilisateur

Linksys

Linksys WRT54GP2 - Wireless-G Broadband Router Manuel utilisateur

Linksys

Linksys WRT54GX2 - Wireless-G Broadband Router Manuel utilisateur

Linksys

Linksys WRT54G2 - Wireless-G Broadband Router Manuel d'utilisation

Linksys

Linksys MAX-STREAM MR7300 Series Manuel utilisateur

Linksys

Linksys easyHOTSPOT WRT54GL Manuel utilisateur

Linksys

Linksys MAX-STREAM MR9000 Manuel utilisateur

Linksys

Linksys WRT54GX4 Manuel utilisateur

Linksys

Linksys WRT54GR - Wireless-G Broadband Router Manuel utilisateur

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur