Linksys SRW2008 Manuel utilisateur
Model No.
WIRED with WebView
8-Port 10/100/1000 Gigabit Switch
SRW2008/SRW2008P/SRW2008MP
User Guide
WebView Switches
Copyright and Trademarks
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco
Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All
rights reserved. Other brands and product names are trademarks or registered trademarks of their respective
holders.
How to Use this User Guide
The User Guide to the WebView Switches has been designed to make understanding networking with the switch
easier than ever. Look for the following items when reading this User Guide:
In addition to these symbols, there are definitions for technical terms that are presented like this:
Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like
this:
Figure numbers and descriptions can also be found in the “List of Figures” section.
This exclamation point means there is a caution or
warning and is something that could damage your
property or the Switch.
word: definition.
This checkmark means there is a note of interest and
is something you should pay special attention to while
using the Switch.
This question mark provides you with a reminder about
something you might need to do while using the Switch.
Figure 0-1: Sample Figure Description
7031910A-RR
WARNING: This product contains chemicals, including lead, known
to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
WebView Switches
Table of Contents
Chapter 1: Introduction 1
Welcome 1
What’s in this User Guide? 3
Chapter 2: Getting to Know the Switch 4
Overview 4
SRW2008 - Front Panel 4
SRW2008P, SRW2008MP - Front Panel 6
The Back Panel 7
Chapter 3: Connecting the Switch 8
Overview 8
Before You Install the Switch... 9
Placement Options 9
Connecting the Switch 12
Chapter 4: Using the Console Interface for Configuration 13
Overview 13
Configuring the HyperTerminal Application 13
Connecting to the Switch through a Telnet Session 14
Configuring the Switch through the Console Interface 15
Chapter 5: Using the Web-based Utility for Configuration 27
Overview 27
Accessing the Web-based Utility 27
Setup Tab - Summary 28
Setup Tab - Network Settings 29
Setup Tab - Time 30
Port Management Tab - Port Settings 31
Port Management Tab - Link Aggregation 34
Port Management Tab - LACP 35
Port Management Tab - PoE Power Settings 36
VLAN Management Tab - Create VLAN 36
VLAN Management Tab - Port Settings 37
VLAN Management Tab - Ports to VLAN 38
VLAN Management Tab - VLAN to Ports 39
WebView Switches
VLAN Management Tab - GVRP 40
Statistics Tab - RMON Statistics 40
Statistics Tab - RMON History 42
Statistics Tab - RMON Alarm 44
Statistics Tab - RMON Events 45
Statistics Tab - Port Utilization 46
Statistics Tab - 802.1x Statistics 47
Statistics Tab - GVRP Statistics 47
ACL Tab - IP Based ACL 48
ACL Tab - MAC Based ACL 51
Security Tab - ACL Binding 52
Security Tab - RADIUS 52
Security Tab - TACACS+ 53
Security Tab - 802.1x Settings 54
Security Tab - Port Security 55
Security Tab - Multiple Hosts 57
Security Tab - Storm Control 57
QoS 58
QoS Tab - CoS Settings 59
QoS Tab - Queue Settings 59
QoS Tab - DSCP Settings 60
QoS Tab - Bandwidth 60
QoS Tab - Basic Mode 61
QoS Tab - Advanced Mode 61
Spanning Tree 64
Spanning Tree Tab - STP Status 64
Spanning Tree Tab - Global STP 65
Spanning Tree Tab - STP Port Settings 66
Spanning Tree Tab - RSTP Port Settings 67
Spanning Tree Tab - MSTP Properties 69
Spanning Tree Tab - MSTP Instance Settings 69
Spanning Tree Tab - MSTP Interface Settings 70
Multicast Tab - IGMP Snooping 72
Multicast Tab - Bridge Multicast 73
Multicast Tab - Bridge Multicast Forward All 74
SNMP Tab - Global Parameters 74
WebView Switches
SNMP Tab - Views 75
SNMP Tab - Group Profile 76
SNMP Tab - Group Membership 77
SNMP Tab - Communities 78
SNMP Tab - Notification Filter 79
SNMP Tab - Notification Recipient 80
Admin Tab - User Authentication 81
Admin Tab - Jumbo Frames 82
Admin Tab - Static Address 82
Admin Tab - Dynamic Address 83
Admin Tab - Logging 84
Admin Tab - Port Mirroring 85
Admin Tab - Cable Test 85
Admin Tab - Save Configuration 86
Admin Tab - Firmware Upgrade 87
Admin Tab - Reboot 87
Admin Tab - Factory Defaults 88
Admin Tab - Server Logs 88
Admin Tab - Memory Logs 89
Admin Tab - Flash Logs 89
Appendix A: About Gigabit Ethernet and Fiber Optic Cabling 90
Gigabit Ethernet 90
Fiber Optic Cabling 90
Appendix B: Windows Help 91
Appendix C: Downloading using Xmodem 92
Startup Menu Procedures 92
Appendix D: Glossary 94
Appendix E: Specifications 101
SRW2008 101
SRW2008MP 105
SRW2008P 109
Appendix F: Warranty Information 113
Appendix G: Regulatory Information 114
Appendix H: Contact Information 120
WebView Switches
List of Figures
Figure 2-1: Front Panel of the SRW2008 4
Figure 2-2: Front Panel of the SRW2008P 6
Figure 2-3: Back Panel of the SRW2008P 7
Figure 3-1: Typical Network Configuration for the SRW2008P 8
Figure 3-2: Attach the Brackets to the Switch 10
Figure 3-3: Mount the Switch in the Rack 10
Figure 3-4: Proper Wall-Mount Orientation (Horizontal) 11
Figure 3-5: Incorrect Wall-Mount Orientation (Vertical) 11
Figure 3-6: Wall-Mount Template 11
Figure 4-1: Finding HyperTerminal 13
Figure 4-2: Connection Description 13
Figure 4-3: Connect To 13
Figure 4-4: COM1 Properties 14
Figure 4-5: Telnet Login screen 14
Figure 4-6: Switch Main Menu 15
Figure 4-7: System Configuration Menu 16
Figure 4-8: System Information Menu 17
Figure 4-9: Versions 17
Figure 4-10: General System Information 17
Figure 4-11: Management Settings Menu 18
Figure 4-12: Serial Port Configuration 18
Figure 4-13: Telnet Configuration 18
Figure 4-14: SSH Configuration 19
Figure 4-15: SSH Server Configuration 19
Figure 4-16: SSH Status 19
Figure 4-17: SSH Crypto Key Generation 20
Figure 4-18: SSH Keys Fingerprints 20
Figure 4-19: Username & Password Settings 21
WebView Switches
Figure 4-20: Security Settings 21
Figure 4-21: SSL Certificate Generation 21
Figure 4-22: SSL Certificate 22
Figure 4-23: IP Configuration 22
Figure 4-24: IP Address Configuration 23
Figure 4-25: HTTP 23
Figure 4-26: HTTPS Configuration 23
Figure 4-27: Network Configuration 24
Figure 4-28: Ping Test 24
Figure 4-29: TraceRoute Test 24
Figure 4-30: File Management 25
Figure 4-31: Restore System Default Settings 25
Figure 4-32: Reboot System 25
Figure 4-33: Port Status 26
Figure 4-34: Port Configuration 26
Figure 5-1: Login Screen 27
Figure 5-2: Setup - Summary 28
Figure 5-3: Setup - Network Settings 29
Figure 5-4: Setup - Time 30
Figure 5-5: Port Management - Port Settings 31
Figure 5-6: Port Settings - Port Configuration Detail 32
Figure 5-7: Port Management - Link Aggregration 34
Figure 5-8: Link Aggregation - Link Aggregation Detail 34
Figure 5-9: Port Management - LACP 35
Figure 5-10: Port Management - PoE 36
Figure 5-11: VLAN Management - Create VLAN 36
Figure 5-12: VLAN Management - Port Settings 37
Figure 5-13: VLAN Management - Ports to VLAN 38
Figure 5-14: VLAN Management - VLAN to Ports 39
Figure 5-15: VLAN to Ports - Join VLAN 39
WebView Switches
Figure 5-16: VLAN Management - GVRP 40
Figure 5-17: Statistics - RMON Statistics 41
Figure 5-18: Statistics - RMON History 42
Figure 5-19: RMON History Table 43
Figure 5-20: Statistics - RMON Alarm 44
Figure 5-21: Statistics - RMON Events 45
Figure 5-22: RMON Events - Events Log 46
Figure 5-23: Statistics - Port Utilization 46
Figure 5-24: Statistics - 802.1x Statistics 47
Figure 5-25: Statistics - GVRP Statistics 47
Figure 5-26: ACL - IP Based ACL 49
Figure 5-27: ACL - Mac Based ACL 51
Figure 5-28: Security - ACL Binding 52
Figure 5-29: Security - RADIUS 52
Figure 5-30: Security - TACACS+ 53
Figure 5-31: Security - 802.1x Settings 54
Figure 5-32: 802.1x Settings - Setting Timer 55
Figure 5-33: Security - Port Security 55
Figure 5-34: Security - Multiple Hosts 57
Figure 5-35: Security - Storm Control 57
Figure 5-36: QoS - CoS Settings 59
Figure 5-37: QoS - Queue Settings 59
Figure 5-38: QoS - DSCP Settings 60
Figure 5-39: QoS - Bandwidth 60
Figure 5-40: QoS - Basic Mode 61
Figure 5-41: QoS - Advanced Mode 61
Figure 5-42: Advanced Mode - Out of Profile DSCP 62
Figure 5-43: Advanced Mode - Policy Name 62
Figure 5-44: Advanced Mode - New Class Map 62
Figure 5-45: Advanced Mode - New Aggregate Policer 63
WebView Switches
Figure 5-46: Spanning Tree - STP Status 64
Figure 5-47: Spanning Tree - Global STP 65
Figure 5-48: Spanning Tree - STP Port Settings 66
Figure 5-49: Spanning Tree - RSTP Port Settings 67
Figure 5-50: Spanning Tree - MSTP Properties 69
Figure 5-51: Spanning Tree - MSTP Instance Settings 69
Figure 5-52: Spanning Tree - MSTP Interface Settings 70
Figure 5-53: Multicast - IGMP Snooping 72
Figure 5-54: Multicast - Bridge Multicast 73
Figure 5-55: Multicast - Bridge Multicast Forward All 74
Figure 5-56: SNMP - Global Parameters 74
Figure 5-57: SNMP - Views 75
Figure 5-58: SNMP - Group Profile 76
Figure 5-59: SNMP - Group Membership 77
Figure 5-60: SNMP - Communities 78
Figure 5-61: SNMP - Notification Filter 79
Figure 5-62: Notification Recipient 80
Figure 5-63: Admin - User Authentication 81
Figure 5-64: Jumbo Frames 82
Figure 5-65: Admin - Static Address 82
Figure 5-66: Admin - Dynamic Address 83
Figure 5-67: Admin - Logging 84
Figure 5-68: Admin - Port Mirroring 85
Figure 5-69: Admin - Cable Test 85
Figure 5-70: Admin - Save Configuration 86
Figure 5-71: Admin - Firmware Upgrade 87
Figure 5-72: Admin - Reboot 87
Figure 5-73: Admin - Factory Defaults 88
Figure 5-74: Admin - Server Logs 88
Figure 5-75: Admin - Memory Logs 89
Figure 5-76: Admin - Flash Logs 89
WebView Switches
Figure C-1: Startup Menu 92
Figure C-1: Auto-Boot Message 92
Figure C-2: Send File 93
Figure C-3: Download 93
Autres manuels pour SRW2008
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Linksys Changer
Linksys
Linksys EF24G2 - EtherFast Dual Gigabit Manuel utilisateur
Linksys
Linksys SD208 - Small Business Unmanaged Switch Manuel utilisateur
Linksys
Linksys SR224G - Cisco - 10/100 Gigabit Switch Manuel d'utilisation
Linksys
Linksys SRW248G4 Manuel d'utilisation
Linksys
Linksys SRW208 Manuel utilisateur
Linksys
Linksys SVIEW04 - ProConnect CPU Switch KVM Manuel utilisateur
Linksys
Linksys Instant EtherFast Series Manuel utilisateur
Linksys
Linksys LGS116P Mode d’emploi
Linksys
Linksys SLM248P - Cisco - 10/100 Manuel d'utilisation
Linksys
Linksys EFAH05W Manuel utilisateur
Linksys
Linksys SR2016 - Cisco - 10/100/1000 Gigabit Switch Manuel d'utilisation
Linksys
Linksys EG008W - Instant Gigabit Workgroup Switch Manuel utilisateur
Linksys
Linksys USBHUB4C Manuel utilisateur
Linksys
Linksys ProConnect SVIEW08 v2 Manuel utilisateur
Linksys
Linksys EtherFast EG0801W Manuel utilisateur
Linksys
Linksys ProConnect PS2KVM2 Manuel utilisateur
Linksys
Linksys SD216 Manuel utilisateur
Linksys
Linksys SD205 - Small Business Unmanaged Switch Manuel utilisateur
Linksys
Linksys EtherFast EZXS55W v2 Manuel utilisateur
Linksys
Linksys EtherFast EF3116 Manuel utilisateur
