Linksys FGW5500 Manuel utilisateur

Linksys 5G WiFi 6 Router

Quick Start Guide

FGW5500

5G WiFi 6 Router

LED Indicators

LED Indication

Color

Status

Description

Bottom LED -

5G/LTE/3G/Ethernet

Wan/Alarm

Blue

5G (SA/NSA) On

Device connects to 5G network

Green

LTE/3G On

Device connects to LTE/3G network

Orange

Ethernet WAN

Device connects to Internet via Ethernet WAN

Red

Alarm

System Alarm ON

• No SIM card detect

• No Internet available

• Failed to boot up system

OFF

Power OFF

Middle LED –

WiFi/WPS enabled

Blue

• LED ON for either 2.4GHz, 5GHz, or Both have been activated

• While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the WiFi

LED color is Blue.

• While UE connects to 4G network (LTE/3G), the WiFi LED color is Green.

• Blinking, WiFi WPS process, (1 sec on, 1 sec off)

Blinking

Green

Blinking

OFF

Both 2.4GHz AND 5GHz are disabled

Top LED – Voice SIP or

VoLTE enabled

Blue

• LED ON for either SIP or VoLTE has been activated

• While UE connects to 5G network (SA/NSA) or Ethernet WAN mode, the Voice

LED color is Blue.

• While UE connects to 4G network (LTE/3G), the Voice LED color is Green.

• Blinking, SMS/Missed process. (2 sec on, 2 sec off)

Blinking

Green

Blinking

OFF

Both Voice SIP AND VoLTE didn’t register

Booting

Blue

• 10 seconds initial setup on bottom LED with solid BLUE

• Then 2 mins 40 sec for LED chasing on 3 LEDs chasing with BLUE

Firmware Upgrade

Blue

All LEDs in Chasing Pattern with blue color

Reset

Blue

All LEDs in Blinking with blue color

Product Overview

○

1 Power Input

○2 Power on/off Switch

○3 2.5GbE LAN Port

○4 1GbE LAN Port

○5 USB Port (Reserve)

○

6 FXS Port

○7 WPS button

○8 SIM Slot

○9 Reset button (press 5 sec for

reset to default)

Installation

Please follow the steps below to install the router:

Step1: Insert SIM card into the router with direction shown below until it clicks.

Step2: Connect one of the LAN ports (any will do) on the router to your PC with a RJ-45 Ethernet cable

provided.

Step3: Insert the power cord into the DC-12V power jack of the router; and insert the correct plug into

your home’s power outlet.

Step4: Switch ON the power. The router will start the booting process. After a few seconds, the LED

lights will start blinking with blue color.

Step5: When the router has booted up, you will see the following LED lights on in solid color: the LTE

(Green) or 5G (Blue). You can now connect your devices to the router via Ethernet or over WiFi.

The WiFi network name SSID and Key can be found on the label underneath the router.

Note:

1. To remove the SIM card, please press the card in until it clicks, and it will pop out automatically.

2. Do not remove the SIM card when the router is operating.

Advanced Setup

If you would like to change any of the router default settings, such as the WiFi network name SSID or Key,

please access the browser on a device that is connected to the router.

Step 1. Open the Web browser and enter the default IP address of FGW5500:

https://192.168.15.1

Step 2. Enter username/password to access the web management interface.

Username: user

Password: the Password mentioned on the bottom of the unit

The page displays in your browser after logging in. You can then configure the settings by following

installation wizard accordingly.

Step 3. For more features setup, please refer to user manual on https://www.linksys.com/linksys-

support

LNKPG-00978 Rev. A00

Autres manuels pour FGW5500

Table des matières

Autres manuels Linksys Routeur réseau

Linksys

Linksys E8400 Manuel utilisateur

Linksys

Linksys VELOP Manuel utilisateur

Linksys

Linksys SRW208P - Cisco Small Business Managed... Manuel d'utilisation

Linksys

Linksys WRT320N - Wireless-N Gigabit Router Wireless Manuel utilisateur

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Manuel utilisateur

Linksys

Linksys WAG120N Manuel utilisateur

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manuel d'utilisation

Linksys

Linksys WET610N - Wireless-N EN Bridge Manuel utilisateur

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Instructions d'utilisation d'origine

Linksys

Linksys WET54G V3 Manuel utilisateur

Linksys

Linksys BEFN2PS4 - EtherFast Cable/DSL And Voice... Manuel utilisateur

Linksys

Linksys HomeLink HPB200 Manuel utilisateur

Linksys

Linksys EtherFast EF3124 Manuel utilisateur

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Manuel d'utilisation

Linksys

Linksys LRT224 Manuel utilisateur

Linksys

Linksys EF1324 Manuel utilisateur

Linksys

Linksys BEFSX41 - Instant Broadband EtherFast Cable/DSL Firewall... Manuel utilisateur

Linksys

Linksys E900 Manuel utilisateur

Linksys

Linksys SGE2010P Manuel d'utilisation

Linksys

Linksys RTP300 - Broadband Router With 2 Phone Ports Mode d’emploi

Linksys

Linksys Instant PowerLine PLEBR10 Instructions d'utilisation d'origine

Linksys

Linksys WAG54G - Wireless-G ADSL Gateway Wireless... Manuel utilisateur

Linksys

Linksys EtherFast BEFSRU31 Manuel utilisateur

Linksys

Linksys WT54GV22 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité