Lincoln Electric X-Tractor 1GC Manuel utilisateur

• High efficiency, cleanable polyester filter.

• Uses a single fume gun or suction nozzle attachment.

• Filter is easily cleaned while inside the machine using a unique

compressed air rotary jet cleaning system.

• Automatic start/stop current sensor extends motor life and

provides extraction only when needed.

• For light to medium duty applications.

• Two powerful motors.

• Low noise operation: 74 dBA.

• Adapter for 45 mm (1-3/4 in.) hose (S20591-8).

• 8 ft. (2.4 m) flexible hose. 45 mm (1-3/4") diameter.

• 2 spare sets of carbon brushes for motors.

• Filter cartridge.

•12' (3.6 m) power cord.

X-Tractor 1GC

Portable Welding Fume Extractor

Lincoln’s X-Tractor 1GC is a portable, high vacuum, low volume extraction system

specifically designed for the removal and filtration of welding fumes. The 1GC is

the perfect choice for small shops or companies with few welding stations, yet

lightweight and small enough to be easily carried to the welding area.

Because of its high portability and low cost, the X-Tractor 1GC is

perfect for light duty welding use such as light fabrication,

maintenance and construction applications. With a simple motor

brush replacement, the X-Tractor 1GC could be used in "light duty"

semiautomatic applications as well.

What sets the X-Tractor 1GC apart from the competition is its unique internal and

self-contained filter cleaning system. By using compressed air, the filter is blown

out by a high-velocity rotary air jet device that extends the life of the filter.

Simple. Easy. Effective

Overall filter performance will be affected by process and application variables

including: base metal(s), consumable(s), and coatings (oil) if applicable.

Publication E13.17 2/07

www.lincolnelectric.com

Processes

Stick, TIG, MIG, Flux-Cored

Description

Extraction capacity: Low Speed: 55 CFM

High Speed: 115 CFM

Advantage Lincoln

Base Unit Includes

TECHNICAL SPECIFICATIONS

ENVIRONMENTAL SYSTEMS

55 CFM

LO:

HI:

110 CFM

PHASE

Extraction

Capacity

Input

Product Product Input Requirements Dimensions Net Weight

Name Number Volts / Phase / Hertz Input Current H x W x D in (mm) lbs (kg)

X-Tractor 1GC K652-1 120V/1/50/60 15 340 x 680 x 400 17

(13.4 x 26.8 x 15.8) (37)

K652-2 220V/1/50/60 9

Shown with optional

K639-5 Suction Nozzle

A CLOSER LOOK

Weight and Design

The X-Tractor 1GC is lightweight and portable at only 37 lbs.

(17 kg) and can easily be carried anywhere.This machine is

perfect for light duty, intermittent use such as maintenance

and construction applications.

High vacuum welding fume extraction systems utilize higher

pressure of 70-90" WG and low volume of 50-100 CFM with

an air speed of 4000-5000 ft/min. The air handling configura-

tion of high vacuum equipment allows the use of small diame-

ter rigid duct and small diameter flex hose to easily reach

extraction points. It is perfect for applications such as short

welds when using fume suction nozzles or larger fixture weld-

ing using integrated fume extraction guns. This process is

designed for close proximity source extraction from 2-4" to the

welding source.

Since the hoses and suction nozzles are smaller than those of

low vacuum systems, it is much easier to carry the extraction

nozzle and/or flex hose into confined spaces (45 ft. maximum

distance). The mobility of the hoses allows the main filter unit

to be kept at a central location. Due to the low air volume

(CFM) extracted make-up air and negative room air pressures

are kept to a minimum when exhausting outside the facility.

Filtration Process

The X-Tractor 1GC has a unique internal manual cleaning

system. Using a customer supplied compressed air source

and manual rotation, the internal rotary air jet device supplies a

burst of air from inside the filter cartridges. This in turn causes

the particulate that has collected on the outside of the filter

cartridge to drop into the bottom of the unit. The cover where

the flex hose inlet is located is then removed and the

particulate can be disposed of by following federal, state, and

local environmental regulations.

Cable Sensor

At the bottom of the X-Tractor 1GC unit is an automatic

start/stop sensor. The unit automatically switches on as the

welder begins to weld. And automatically switches off approxi-

mately 15 seconds after the welder stops welding. The result

is less energy consumption and non-continuous noise. For the

automatic start/stop function to work, the welders work cable

or power cable must be laid in the sensor hook.

X-Tractor 1GC

[2] www.lincolnelectric.com

Cable Sensor

X-Tractor 1GC

[3]

RECOMMENDED OPTIONS

GENERAL OPTIONS

EN 20 Extraction Nozzle

The EN 20 nozzle is designed for a wide

array of welding applications. With its funnel

extraction opening and magnetic mounting

stand, it gives the welder a greater amount

of versatility.

Order K2389-5

EN 40 Extraction Nozzle

The EN 40 nozzle is designed for stick

electrode applications. With its L-shaped

tube and an elongated slotted opening, the

EN 40 nozzle is designed to coincide with

the time it takes the welder to use one stick

electrode. This design alleviates the welder

from having to continuously reposition the

nozzle. Magnetic mounting stand included.

Order K2389-6

SHFA Flat Suction Nozzle

150 mm (6 in.) Aluminum suction nozzle

with 20 in. (500 mm) flexible steel hose and

magnetic mounting. Includes S20591-7

adapter for 1-3/4 in. (45 mm) hose. Best

capture distance: < 4 in. (100 mm).

Order K639-5

Aluminum Suction Nozzle with Magnetic

Mounting. Includes S20591-7 adapter for

1 3/4 in. (45 mm) hose. Best capture

distance:~ 1-1/2 in. (38 mm).

SHM-300 Nozzle-300 mm (12 in.) Nozzle

Order K639-1

SHM-400 Nozzle-400 mm (16 in.) Nozzle

Order K639-2

SHM-500 Nozzle-500 mm (20 in.) Nozzle

Order K639-3

SHMS-400 Nozzle

Low noise Nozzle-400 mm (16 in.)

Aluminum suction nozzle with magnetic

mounting. Includes S20591-7 adapter for

1-3/4 in.

(45 mm) hose. Best capture distance:~

1-1/2 in. (38 mm).

Order K639-4

UNM Suction Nozzle for Heavy Smoke

200 mm (8 in.) Aluminum suction nozzle

with magnetic mounting. Includes S20591-7

adapter for 1-3/4 in. (45 mm) hose. Best

capture distance: < 4 in. (100 mm)

Order K639-6

GENERAL OPTIONS, CONT.

SHMT Round Suction Nozzle

90 mm (3.6 in.) Suction nozzle with 13 in.

(330 mm) flexible steel hose and magnetic

mounting. Includes S20591-8 adapter for

1-3/4 in. (45 mm) hose. Best capture

distance: < 4 in. (125 mm).

Order K639-14

Gun Mounted Nozzle Kit (OT-25)

Nickel plated brass nozzle slips over the

gun’s gas nozzle and secures with screw.

Includes a total of 16 ft. (5 m) of hose and

all necessary adapters including SS-3245

for connection to 1-3/4 in. (45 mm) hose.

Order K639-20

Nozzle Kits

The NKT and NKC nozzle kits provide

extraction capacity to standard welding

torches. The NKT kit is for mounting the

extraction hose on top of gun. The NKC kit

is for circular extraction. Note: guns not

included.

Order K2389-3 for NKT

Order K2389-4 for NKC

Extraction Hoses

For longer hose applications, flexible high

temperature hoses with spring steel

reinforcement are optional. The extraction

hoses can be used to connect to or replace

the already included hose with X-Tractor

1GC base unit. To ensure effective

performance level, it is recommended that a

maximum hose length of 45 ft. (15 m) be

used.

Order K2389-8

for 16 ft. x 1-3/4 in. hose

Order K2389-9

for 8 ft. x 1-3/4 in. hose

Hose-to-Hose Adapter

To connect hoses together, a 2 in. (50 mm)

hose-to-hose adapter screws over hose

ends, providing a tight connection and seal.

Order K2389-10

Fume Guns

To extract welding fumes, Lincoln Electric's

X-Tractor 250FG, 340FG, and 500FG fume

guns, can be connected to the X-Tractor

1GC and its extraction hose.

For X-Tractor 250FG, 340FG, 500FG

contact Lincoln Electric Sales Office

www.lincolnelectric.com

NKT

K2389-3

NKC

K2389-4

X-TRACTOR 1GC ORDER FORM

PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE

CUSTOMER ASSISTANCE POLICY

The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our

customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based

on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or

advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of

practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does the provision of information or

advice create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric is a responsible manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the

customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.

X-TRACTOR 1GC 120/1/50/60 K652-1

X-TRACTOR 1GC 220/1/50/60 K652-2

GENERAL OPTIONS

EN 20 Extraction Nozzle K2389-5

EN 40 Extraction Nozzle K2389-6

SHFA Flat Suction Nozzle K639-5

SHM-300 Nozzle K639-1

SHM-400 Nozzle K639-2

SHM-500 Nozzle K639-3

SHMS-400 Low Noise Nozzle K639-4

UNM Suction Nozzle for Heavy Smoke K639-6

SHMT Round Suction Nozzle K639-14

Gun Mounted Nozzle Kit (OT-25) K639-20

NKT Nozzle Kit K2389-3

NKC Nozzle Kit K2389-4

16 ft. x 1-3/4 in. Extraction Hose K2389-8

8 ft. x 1-3/4 in. Extraction Hose K2389-9

Hose-to-Hose Adapter K2389-10

X-Tractor Fume Guns (250FG, 340FG, 500FG) Contact Lincoln Electric Sales Office

TOTAL:

Environmental Systems Family

High & Low

Vacuum Solutions

THE LINCOLN ELECTRIC COMPANY

22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com

Autres manuels pour X-Tractor 1GC

Autres manuels Lincoln Electric Système de soudage

Lincoln Electric

Lincoln Electric RED-D-ARC 11389 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWERFEED IM827-D Manuel utilisateur

Lincoln Electric

Lincoln Electric Dual Maverick 450 Manuel utilisateur

Lincoln Electric

Lincoln Electric Power-Arc 5500 Manuel utilisateur

Lincoln Electric

Lincoln Electric spirit II 150 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWER MIG 215 MPi Manuel utilisateur

Lincoln Electric

Lincoln Electric PCT 80 Manuel utilisateur

Lincoln Electric

Lincoln Electric SPIRIT II 400 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC 275TP Manuel utilisateur

Lincoln Electric

Lincoln Electric WELDLINE WTT2 20W Manuel utilisateur

Lincoln Electric

Lincoln Electric IM610-A Manuel utilisateur

Lincoln Electric

Lincoln Electric SQUARE WAVE IM687 Manuel utilisateur

Lincoln Electric

Lincoln Electric 12270 Manuel utilisateur

Lincoln Electric

Lincoln Electric OUTBACK 145 IM973 Manuel utilisateur

Lincoln Electric

Lincoln Electric LINC 406 Manuel utilisateur

Lincoln Electric

Lincoln Electric Vantage 300 Manuel utilisateur

Lincoln Electric

Lincoln Electric AC/DC 225/125 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWER WAVE 405M Manuel utilisateur

Lincoln Electric

Lincoln Electric COMMANDER SVM145-B Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC 160 TPX Manuel utilisateur

Lincoln Electric

Lincoln Electric Flextec 500 Manuel utilisateur

Lincoln Electric

Lincoln Electric Wire Feed Module 12207 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWERPLUS 1000HD Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur

Everlast

Everlast POWER MTS 221STi Manuel utilisateur

Kipor

Kipor KDE180XW Manuel utilisateur