Lightmybricks Ecto-1 & 2 LED Lighting Kit Manuel utilisateur

Light My Bricks : Ecto-1 & 2 LED Lighting Kit

Here is the instructions document for the Lego Ecto-1 & 2 LED lighting kit. Please read

and follow the steps carefully to ensure this lighting kit is installed properly.

Package contents:

 5x White 30cm Bit Lights

 2x White 15cm Bit Lights

 4x Flashing 15cm Bit Lights

 1x 12-port Expansion Board

 1x Flat Battery Pack (2x CR2032 batteries included)

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they

are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together

around cables; instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable

and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can

be inserted only one way. With the expansion board facing up, look for the soldered “=”

symbol on the left side of the port. The connector side with the wires exposed should be

facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily

into a port connector, do not force it.

WARNING: Incorrectly inserting the connector can result in bent pins inside the

port or possible overheating of the expansion board when connected.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way

up (Yellow LED component exposed). You can either place them directly on top of

LEGO® studs or in between.

OK, Let’s Begin!

Instructions for installing this kit

1.) We will start with installing headlights to Ecto-1. Start by removing the following pieces

to allow us to then remove one of the headlight sections as per below.

2.) Disassemble the headlight piece and then take one bit light with 30cm cable and

thread the connector side of the cable through the back of the white 1×1 brick with hole.

Pull it all the way through from the front side of the brick until the LED component is sitting

nicely in the inside of the brick. Ensure the LED component is facing the correct way.

You may need to bend the cable down on a 90 degree angle to ensure the LED

component will face forward correctly

Autres manuels Lightmybricks Jouet

Lightmybricks

Lightmybricks LEGO Star Wars Death Star 75159 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO TITANIC 10294 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE KNIGHT BUS Manuel utilisateur

Lightmybricks

Lightmybricks LEGO INFINITY GAUNTLET 76191 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Corner Garage 10264 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO SANTA'S VISIT 10293 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Star Wars Darth Vader Castle 75251 Lighting... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HARRY POTTER HUNGARIAN HORNTAIL DRAGON Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 21054 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOGWARTS CHAMBER OF SECRETS 76389 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE GUARDIANS' SHIP 76193 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO GALAXY EXPLORER 10497 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks 70657 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Gingerbread House 10267 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks 10314 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 1989 Batmobile Manuel utilisateur

Lightmybricks

Lightmybricks 10262 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO LION KNIGHTS' CASTLE Manuel utilisateur

Lightmybricks

Lightmybricks Lego 10283 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 1989 Batwing 76161 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO MARVEL STAR-LORD'S HELMET Manuel utilisateur

Lightmybricks

Lightmybricks LEGO WINNIE THE POOH 21326 Manuel utilisateur

Lightmybricks

Lightmybricks 123 Sesame Street 21324 Light Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Winter Village Bakery 10216 Lighting... Manuel utilisateur

Manuels Jouet populaires d'autres marques

marklin

marklin 37321 Manuel utilisateur

Canon

Canon PAPER CRAFT Manuel utilisateur

GREAT PLANES

GREAT PLANES Pitts M-12S Manuel utilisateur

NOCH

NOCH 14261 Manuel utilisateur

Hausler

Hausler 450 SE V2 Manuel utilisateur

Dynaflite

Dynaflite Daydream Manuel utilisateur

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuel

Kenner

Kenner Batman 63651 Manuel utilisateur

LEGO

LEGO 8527 Manuel utilisateur

iKarus

iKarus ECO 8 Manuel utilisateur

Multiplex

Multiplex EasyStar II Mode d’emploi

Walkera

Walkera 38 Mode d’emploi

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuel utilisateur

MD

MD MXION SWD Manuel utilisateur

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuel utilisateur

marklin

marklin 39671 Manuel utilisateur

Meccano

Meccano 15103 Manuel utilisateur

LEGO

LEGO TECHNIC 8735 Manuel utilisateur