Lightmybricks 75095 Manuel utilisateur

LEGO STAR WARS UCS TIE FIGHTER 75095

LIGHT KIT

INSTALLATION GUIDE

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

INSTALLATION GUIDE 2

Light My Bricks

LEGO STAR WARS UCS TIE FIGHTER 75095

INSTALLATION GUIDE

Hi There!

We’re here to help you get started on the LEGO

Star Wars UCS Tie Fighter 75095 Light Kit.

This PDF details the instructions for the LED light kit only. If

you are wishing to purchase this product, please click here

to view the product page.

If you run into any issues, please refer to the troubleshoot-

ing section towards the end of this guide.

Have fun and enjoy!

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

PACKAGE CONTENTS 3

PACKAGE CONTENTS: ASSORTED BRICKS:

5x White 15cm Bit Light*

1x 6-Port Expansion Board

• 1x Round Plate 1x1 - Trans Light Blue

• 2x Lightsaber Bar - Trans Bright Green

1x 5cm Connecting Cable

1x USB Power Cable

* Indicates components which include spares

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

CONTENTS 4

Contents

Before You Begin

Blueprint

Instructions

Final Product

Troubleshooting

Contact

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 5

Before You Begin

Laying cables in between

and underneath bricks

Cables can ﬁt in between and underneath

LEGO® bricks, plates, and tiles providing

they are laid correctly between the

LEGO® studs. Do NOT forcefully join

LEGO® together around cables; instead

ensure they are laying comfortably in

between each stud.

CAUTION: Forcing LEGO® to connect over

a cable can result in damaging the cable

and light.

Connecting Cable

Connectors To Expansion

Boards

Take extra care when inserting connectors

to ports of Expansion Boards. Connectors

can be inserted only one way. With the

expansion board facing up, look for the

soldered “=” symbol on the left side of the

port. The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into the

port. If a plug won’t ﬁt easily into a port

connector, do not force it.

Incorrectly inserting the connector can re-

sult in bent pins inside the port or possible

overheating of the expansion board when

connected.

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 6

Before You Begin

Connecting Cable

Connectors To Strip Lights

Take extra care when inserting connectors

to ports on the Strip Lights. Connectors

can be inserted only one way. With the

Strip Light facing up, ensure the side of

the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into

a port connector, don’t force it. Doing so

will damage the plug and the connector.

Connecting Micro Cable

Connectors To Micro

Expansion Board Ports

Take extra care when inserting the

micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit

Lights to Micro Expansion Boards is similar

to connecting lights and cables to Strip

Lights. With the expansion board facing

up, ensure the side of the connector with

the wires exposed is facing down. If a plug

won’t ﬁt easily into a port connector, do

not force it. Use your ﬁngernail to push the

plastic part of the connector to the micro

port.

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

BEFORE YOU BEGIN 7

Before You Begin

Installing Bit Lights Under

Lego® Bricks And Plates

When installing Bit Lights under LEGO®

pieces, ensure they are placed the correct

way up (Yellow LED component exposed).

You can either place them directly on top of

LEGO® studs or in between.

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 8

BLUEPRINT

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 9

INSTRUCTIONS

To ensure a smooth installation of

your light kit, please read and follow

each step carefully. If you run into

any issues, please refer to the online

troubleshooting guide.

LEGO STAR WARS UCS TIE FIGHTER 75095 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 10

Legend DISCONNECT CONNECT /

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

Finding it hard to

perform the next step

with Lego Pry Tool.

Try removing yellow

highlighted plates

Table des matières

Autres manuels Lightmybricks Équipement d'éclairage

Lightmybricks

Lightmybricks 10299 Manuel utilisateur

Lightmybricks

Lightmybricks 75322 Manuel utilisateur

Lightmybricks

Lightmybricks 75252 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Elf Club House Light Kit Manuel utilisateur

Lightmybricks

Lightmybricks LEGO WINTER HOLIDAY TRAIN 10254 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO TRON Legacy 21314 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Winter Village Post Office 10222 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Winter Village Fire Station 10263 Lighting... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO PALACE CINEMA 10232 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks 10266 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO STAR WARS AT-AT 75288 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO VENETIAN HOUSES 910023 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Fiat 500 10271 LED light kit Manuel utilisateur

Lightmybricks

Lightmybricks 76209 Manuel utilisateur

Lightmybricks

Lightmybricks Lighting Kit LEGO 10276 RGB Remote Controller... Manuel utilisateur

Lightmybricks

Lightmybricks 75968 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO STAR WARS EXECUTOR SUPER STAR DESTROYER 75356 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HARRY POTTER THE SHRIEKING SHACK & WHOMPING... Manuel utilisateur

Lightmybricks

Lightmybricks 75336 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE OFFICE 21336 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks 10309 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO 75309 Manuel utilisateur

Lightmybricks

Lightmybricks Blade Runner Spinner Manuel utilisateur

Lightmybricks

Lightmybricks LEGO EIFFEL TOWER 10307 LIGHT KIT Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur