Lightmybricks 71016 Manuel utilisateur

LightMyBricks

InstallationInstructionsforLightMyBricksLEDLightingKits

May29,2016 ·30minread

LightMyBricks:Kwik-E-MartLED

LightingKit

Here is the instruction document for the Lego Kwik-E-Mart LED lighting

kit. Please read and follow the steps carefully to ensure this lighting kit

is installed properly.

If you run into any issues, please refer to the online troubleshooting

guide.

This user guide is also available to download in PDF format here.

...

Packagecontents:

7x LED Strip Lights•

10x White 30cm Bit Lights

1x Flashing White 30cm Bit Light

3x Flashing Red 30cm Bit Lights

4x White 15cm Bit Lights

2x Flashing White 15cm Bit Lights

2x 12-port Expansion boards

1x 8-port Expansion Board

1x Flat Battery Pack (Requires 2x CR2032 batteries)

1x Battery Pack (Requires 3x AA batteries)

10x Adhesive squares

Connecting Cables

4x 15cm cables

4x 30cm cables

Extra LEGO Pieces for mounting Strip Lights, CCTV and Billboard Lights

4x Lego Plate 1x6

2x Lego Transparent Red 1x1 round plate

2x Lego Black Tile, Modied 1 x 1 with Clip

2x Lego Technic Pin with Friction Ridges Lengthwise WITH

Center Slots

2x Lego Weapon Spear Gun with Squared Trigger and Thick

Spear Base

2x Lego Technic Black 1x1 brick with hole

•

...

Importantthingstonote:

Layingcablesinbetweenandunderneathbricks

Cables can t in between and underneath LEGO® bricks, plates, and

tiles providing they are laid correctly between the LEGO® studs. Do

NOT forcefully join LEGO® together around cables; instead ensure they

are laying comfortably in between each stud.

CAUTION:ForcingLEGO®toconnectoveracable

canresultindamagingthecableandlight.

ConnectingcableconnectorstoStripLights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing

up, ensure the side of the connector with the wires exposed is facing

down. If a plug won’t t easily into a port connector, don’t force it.

Doing so will damage the plug and the connector.

ConnectingcableconnectorstoExpansionBoards

Take extra care when inserting connectors to ports of Expansion

Boards. Connectors can be inserted only one way. With the expansion

board facing up, look for the soldered “=” symbol on the left side of the

port. The connector side with the wires exposed should be facing

toward the soldered “=” symbol as you insert into the port. If a plug

won’t t easily into a port connector, do not force it.

WARNING:Incorrectlyinsertingtheconnectorcan

resultinbentpinsinsidetheportorpossible

overheatingoftheexpansionboardwhenconnected.

InstallingBitLightsunderLEGO®bricksandplates.

When installing Bit Lights under LEGO® pieces, ensure they are placed

the correct way up (Yellow LED component exposed). You can either

place them directly on top of LEGO® studs or in between.

...

OK, Let’s Begin!

...

Instructionsforinstallingthiskit

LightingthePoliceCar:

1.) Start by removing the following Lego pieces which make up the roof

and windscreen, followed by the black Lego plates and tiles from the

front bonnet.

2.)Disconnect from each side of the car, the black 1 x 1 brick with the

transparent yellow plate attached. Remove the yellow plate from the

black brick and take 1x White 15cm Bit Light and using the connector

end of the cable of the LED, thread this through the hole of the front of

the black brick.

Pull the cable from the back of the black brick all the way until the LED

component is at up against the other side of the brick. Ensure that the

LED component part is facing the correct way up, then secure this

down by reconnecting the transparent yellow Lego plate over the top.

Repeat this step for the other head light of the car using another White

15cm Bit Light.

3.) Reconnect the 2 head lights back to the front of the car ensuring the

cables for the lights are facing up.

4.) Next step is to remove the following Lego pieces from the car so that

we can lay the cables from the headlights underneath and all the way

to the back.

5.) Thread the 2 cables through the small holes behind the front seats,

1 cable through each hole.

6.) Start securing the cables down by reconnecting back Lego plates

and tiles over the top. Before doing so, ensure that the cables are laid in

between studs exactly the same way as the below images.

7.) Reconnect the white bricks as per below ensuring that the cables

are laid in between the black and white studs underneath.

EnsurethecablesarelaidonthesideofeachofthebrownLegostuds

We can now also reconnect the Lego pieces which make up the front of

the dash board, side mirrors, and front windscreen.

8.) In order to hide the rest of the contents from this lighting kit in the

back section of the car, we will be removing and discarding the

following pieces.

Autres manuels Lightmybricks Équipement d'éclairage

Lightmybricks

Lightmybricks LEGO CORNER GARAGE Manuel utilisateur

Lightmybricks

Lightmybricks LEGO WINTER HOLIDAY TRAIN 10254 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO THE GLOBE Manuel utilisateur

Lightmybricks

Lightmybricks LEGO GINGERBREAD HOUSE 10267 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Winter Village Fire Station 10263 Lighting... Manuel utilisateur

Lightmybricks

Lightmybricks LEGO UCS OBI-WAN's JEDI STARFIGHTER 10215 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks 42156 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 Manuel utilisateur

Lightmybricks

Lightmybricks 76408 Manuel utilisateur

Lightmybricks

Lightmybricks 10266 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Manuel utilisateur

Lightmybricks

Lightmybricks 103335 Manuel utilisateur

Lightmybricks

Lightmybricks 76989 Manuel utilisateur

Lightmybricks

Lightmybricks 42125 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO HOGWARTS ICONS Manuel utilisateur

Lightmybricks

Lightmybricks Blade Runner Spinner Manuel utilisateur

Lightmybricks

Lightmybricks LEGO VENETIAN HOUSES 910023 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO AIRBUS H175 RESCUE HELICOPTER 42145 LIGHT... Manuel utilisateur

Lightmybricks

Lightmybricks 75330 Manuel utilisateur

Lightmybricks

Lightmybricks 75322 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO DC BATCAVE SHADOW BOX 76252 LIGHT KIT Manuel utilisateur

Lightmybricks

Lightmybricks 40426 Manuel utilisateur

Lightmybricks

Lightmybricks 75326 Manuel utilisateur

Lightmybricks

Lightmybricks LEGO NATURAL HISTORY MUSEUM Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur