Safety Information
• Not suitable for use with standard dimmers and sensors unless
specically designed for RAB Lightcloud Blue Lamps.
• Do not use where directly exposed to water.
NOT FOR EMERGENCY LIGHTING. ADDED WEIGHT OF THE DEVICE MAY
CAUSE INSTABILITY OF A FREE-STANDING. PORTABLE LUMINAIRE. USE
ONLY WITH A PORTABLE LUMINAIRE THAT IS PROVIDED WITH A SHADE.
• Only install in operating environments between -22°F and 140°F (-30°C
to 60°C). Only use the control provided with or specied by these
instructions to control this lamp. This lamp will not operate properly
when connected to a standard (incandescent) dimmer or dimming
control. CAUTION - RISK OF ELECTRIC SHOCK. Do not use if outer lamp
envelope is damaged or broken.
• WARNING - Risk of re or electric shock. LED Retrot Kit installation
requires knowledge of luminaires electrical systems. If not qualied, do
not attempt installation. Contact a qualied electrician.
• WARNING - Risk of re or electric shock. Install this kit only in luminaires
that have the construction features and dimensions shown in the
photographs and/or drawings and where the input rating of the retrot
kit does not exceed the input rating of the luminaire.
• Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
• WARNING - To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
• THE RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE
WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED
BY AUTHORITIES HAVING JURISDICTION. PRODUCT MUST BE INSTALLED
BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE APPLICABLE
AND APPROPRIATE ELECTRICAL CODES.
THE INSTALLATION GUIDE DOES NOT SUPERSEDE LOCAL OR NATIONAL
REGULATIONS FOR ELECTRICAL INSTALLATIONS.
