LG M4714C Manuel utilisateur

User's Guide

Make sure to read the Safety Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

See the label attached on the product and give the information to your dealer when you ask

for servbe_

Sellers or users should understand that this device is for public use,

not home use.

- Onlyon some models.

1. Take the parts for the stand out of the box and assemble them as

shown in the picture.

2, Place a soft cloth on the table and put the product with the screen

facing downward.

Connectthestand as shown inthe followingpicture.

3.Use the screws to secure the stand on the rear side of the product as shown

in the diagram.

- Only on some models.

Mount the product onto the speaker by using a screw as shown in the following

connect the speaker cable.

After installingyour speakers, use holders andcable ties to organizethe speaker cables.

/_ Cableholder

Remove the paper.

* Thisfeatureis notavailablein allmodel.

li Cabletie

s featureisnotavailableinallmo

When the speaker is installed.

*Connectthe input terminalwith apropercolor match.

-Onlyonsomemodels.

"When installing Portrait, rotate it clockwise based on its front."

Name of the Remote Control Buttons

•AV Button

•SleepButton

WhenwatchingAV,RGBPC,HDMI/DVI

,Component1, Component2

Theproductwillbeautomaticallyturned

offafteracertainperiodoftime.

Pressthisbuttonrepetitivelyto

selectanappropriatetime duration

• PSM Button

- Togglesthroughpresetvideo

settings.

There isnota function

which issupported

•Menu Button-

•UPand Downbuttons/

Bring up and down direction._

adjustment. L

•Mute button_

AV POWER

,_ _ _ AUTO

)

®®®!

I_.......

-(2

MUTE

-C

®i--u-

I. ...... IEXIT

-- •Power On/Off Button

• Input Select Button

(See next page)

-•ARC button

Aspect Ratio Correction. Toggles

through aspect ratio options.

• Auto Button

Automaticadjustmentfunction

(Operationalfor theanalogsignal only)

-- There is notafunction

which issupported

-There is notafunction

which issupported

-- • ExitButton

-- •Volume < _Button

Volume up and down

• Check Button

-- There is notafunction

which issupported

• AV Button

Toggles through video

AV.I_ ,.- Component1

Component2 _ RGB PC

HDMI/DVl

AV POWER INPUT

SLEEP PSM ARC AUTO

CD CDCD CD

®@

0EXIT

-- •Input Select Button

If you press the button once,

the following Input Signal

Window will appear. Select

the signal type you want

using the A Ybutton.

Inserting batteries into remote control.

1. Slide off the battery cover.

AAA Type

*The product image in the user's guide could be different from the actual image.

Rear View

@Power Connector :Connect the power cord

RS-232C Serial Ports

@RGB PC, HDMI/DVI Ports

-HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content

Protection). Some devices require HDCP in order to display HD signals.

PC Sound Jack

: Connectthe audio cable to the *LINE OUTjack of the PC sound card.

O Wired Remote Control Port

AV Ports

Speaker Ports

Firstofall,seeifthe

Then,connectthesignalinputcable.

computer,productandtheperipheralsareturnedoff.

(_ When connecting withthe D-Subsignal input cable.

When connecting with the HDMIto DVI signal inputcable (not included).

Rear side of the product.

PC/MAC

I acintosh Adapter (not included)

Use the standard Macintosh adapter since an incompatible

adapter is available in the market. (Different signaling system)

(not included)

Rear side of the product. PC

* Usermustuseshieldedsignalinterfacecables(D-sub15pincable,DVIcable)withferritecorestomaintain

standardcompliancefortheproduct.

Connect the Audio cable.

Rear side of the product.

Connect the power cord,

Rearside of the product.

_Turn on power by pressing the power button on the product.

(_Turn on the PC.

Power button

Select an input signal.

Press the INPUT button on the remote control to select the input signal.

(INPUT _•,&--* SET ")

Or, press the SOURCE button on the back of the product.

SOURCE ---* • A ---_ AUTO/SET )'il/ iiiiii]i!iiiiiiliiii!iiiliiiiilHliHlliii i iiii!iiiiiii/iiJiii!! i t!iiijiHiilHi!!!/i!li]!

(_ When connecting with a D-Sub signal input cable. _ _" ] ]

•Select RGB PC: 15-pin D-Sub analog signal.

(_When connecting with a HDMI to DVl signal input cable.

•Select HDMIiDVI : HDMI to DVI Digital signal.

I• Howto connect to two computersl

/Note I Connect the signal cables (HDM! to DV! and D,Sub)to each computert

I Press the !aPUT button on the [emote control to select the computer to use_

° Directly connect to a grounded power outlet on the wall or a power bar with a ground

w!re:

iiiii_1_ii_i!_!;i!ii!;_!_!_!_!_!_1_:_!:;!;i_i_iiiiii_;_i_!_i;!iii_ii_ii_i!_i¸!_!i_!i_!i_!iii_i_;_;_i!;_J;_iiiii_i_;i_i_i_ii_!_!_i!_iii!i_¸¸¸¸i_iiiii_i¸_!;_iii_ii!J;_i!_!_i_i_ii_i_iiiiii_iiii_iiiii;;;_i_ii!i!iiS_i_!_ii_ii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_!!!!!!!!....

::::::::::::::,nMort,tots

Use this function when displaying ANALOG RGB inputs of a PC to the other product.

• To use different products connected to each other

Connect one end of the signal inputcable(15-pin D-Sub Signal Gable) to the RGB OUT

connector of product I and connect the other end to the RGB IN connector of other

products.

15-pin D-Sub Signal Cable

i i i i i

Product 1 Product 2 Product 3 Product 4

i¸_¸_Note ii i i :

•Whenmult!-cennectlr_g!n/outcascadeformat,no!osscablesalerecommendedl

"-_--_-' we rec0mmendthatyoushouldusecabledistributor........................................................................................................