LG LCV5300R-BN Manuel utilisateur
OWNER'S MANUAL
IR Dome Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LCV5300R-BN
LCV5300R-BP
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the
modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is
made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
• A suitable conduit entries, knock-outs or glands shall
be provided in the cable entries of this product in the
end user.
3
• Caution: Danger of explosion if battery is incorrectly
replaced. Replaced only with the same or equivalent
type recommended by the manufacturer. Dispose
of used batteries according to the manufacturer’s
instructions.
• Holes in metal, through which insulated wires pass,
shall have smooth well rounded surfaces or shall be
provided with brushings.
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
Warning: Do not install this equipment in a confined space
such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the
National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take adequate
measures.
Warning: To reduce a risk of fire or electric shock, do not
expose this product to rain or moisture.
Caution: This installation should be made by a qualified
service person and should conform to all local codes.
Caution: To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
Caution: The apparatus shall not be exposed to water
(dripping or splashing) and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Note:
Please make sure the product is installed appropriate
places where secured from flood, such as under the
eaves, to operate properly. This product is certified as IP66
standard. However, if there is any flood concerns, it is highly
recommended to use an outdoor Housing When you install
the camera inside an outdoor Housing, please use one of
the following methods:
1. Remove the front glass of Housing before installing the
camera.
2. To keep the front glass of Housing, remove the front
cover, and then put the camera close to the front glass.
4
Disposal of your old appliance
1.
All electrical and electronic products
should be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
2. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
3. For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where you
purchased the product.
4. EEE Compliance with Directive.
(for Turkey only)
LG Electronics hereby declares
that this/these product(s) is/are
in compliance with the essential
requirements and other relevant
provisions of Directive 2004/108/EC
and 2011/65/EU.
European Standards Centre:
Krijgsman 1, 1186 DM Amstelveen The
Netherlands
• Please note that this is NOT a Customer Service
contact point. For Customer Service Information, see
Warranty Card or contact the dealer that you pur-
chased this product.
5
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Important Safety Instructions
6
Power Supply
This camera must always be operated DC 12 V or AC 24
V.Certified/Listed Adaptor which comply with LPS.
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be
cautions not to get combustible or metallic material inside
the body. If used with foreign matter inside, the camera is
liable to fail or to get cause of fire or electric shock.
t Remove dust or dirt on the surface of the lens with a
blower.
t Use a dry soft cloth to clean the body. If it is very dirty,
use a cloth dampened with a small quantity of neutral
detergent then wipe dry.
t Avoid the use of volatile solvents such as thinners,
alcohol, benzene and insecticides. They may damage
the surface finish and/or impair the operation of the
camera.
Operating and storage location
Avoid viewing a very bright object (such as light fittings)
during an extended period. Avoid operating or storing the
unit in the following locations.
t Extremely hot or cold places (operating temperature
-10 °C to 50 °C, however, we recommend that the unit
be used within a temperature range of 0 °C to 45 °C)
t Damp or dust place
t Places exposed to rain
t Places subject to strong vibration
t Close to generators of powerful electromagnetic radia-
tion such as radio or TV transmitters.
Cautions for Safe Operation
7
Features............................................................................. 8
Accessories..................................................................................8
Part Names and Functions ....................................................9
Part Names and Functions ..................................................10
Connections .................................................................... 11
Basic connection.....................................................................11
Installation ...................................................................... 12
Mounting the Camera...........................................................12
Image Adjustment .................................................................15
Menu Operation.............................................................. 18
OSD Menu Overview.............................................................19
General Operation..................................................................21
Exposure Settings...................................................................22
White Balance settings .........................................................25
Day/Night Setting ..................................................................26
SmartIR Setting .......................................................................27
Motion Detection Setting....................................................28
3D-DNR Setting.......................................................................29
Privacy Mask Setting .............................................................29
Special Menu Settings ..........................................................31
SYSTEM Setting .......................................................................35
Specication ................................................................... 36
Contents
8
Features
This IR Bullet Camera is designed for installation in a video
surveillance system.
This manual contains instructions on how to install and
manage the IR Bullet Camera in your video surveillance
system.
Should you require any technical assistance, please contact
authorized service center.
t High resolution and high sensitivity with a 6 mm (1/3
Type) CCD.
t Day & Night function.
t HSBLC/BLC covers various light conditions.
t Weather Proof: IP66
Accessories
Installation sticker
FRONT
PRODUCT CENTER POSITION
MEZ62687703
n
4 Place
SELFTAPPINGSCREW
CABLE HOLE (LCV5300)
CABLE HOLE (LCD5300)
Wrench
M4 Fixing screws
9
Part Names and Functions
aDome Cover
bIR LED
cIR Sensor
dFocus lock lever
Fixes the focus position after adjusting.
e Zoom lock lever
Fixes the zoom position after adjusting.
f Rotate adjuster
gPan adjuster
a
b
c
d
e
f
g
10
Part Names and Functions
hSetup menu control buttons
iVideo Out connector
Use this jack for checking the picture with portable
monitor when install the camera.
jPower input connector
Supplies AC 24 V or DC 12 V from an external power
source.
kVideo output connector (BNC type)
h
i
j
k
Autres manuels pour LCV5300R-BN
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels LG Caméra de sécurité
LG
LG LCD5300R-BN Manuel utilisateur
LG
LG LCP2850I-AN Manuel utilisateur
LG
LG LVC-D200HM Manuel utilisateur
LG
LG LT303 Manuel utilisateur
LG
LG LCU5500R-BN Manuel utilisateur
LG
LG LVW900 series Manuel utilisateur
LG
LG LV300N-C Manuel utilisateur
LG
LG LCU5300R Series Manuel utilisateur
LG
LG LCP2840-DN Manuel utilisateur
LG
LG LG-R105 Manuel utilisateur
LG
LG LNU7210R Manuel utilisateur
LG
LG LNB5100 series Manuel utilisateur
LG
LG L9322 Series Manuel utilisateur
LG
LG LT913 Series Manuel utilisateur
LG
LG LNB5220 Manuel utilisateur
LG
LG LSW2010F Manuel utilisateur
LG
LG LW130W Manuel utilisateur
LG
LG LND3230R Manuel utilisateur
LG
LG LW9424 Manuel utilisateur
LG
LG L5323-BP Manuel utilisateur
