LG PW1500G Manuel utilisateur

PW1500G

PW1000G

Please read the safety information carefully before using this product.

P/No : SAC37034629 (1803-REV03)

Owner's Manual

LG MiniBeam

DLP Projector

www.lg.com

2LICENSES

LICENSES

Supported licenses may differ by model. For more information about

licenses, visit www.lg.com.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol

are trademarks of Dolby Laboratories.

This DivX Certied®device has passed

rigorous testing to ensure it plays DivX®

video.

To play purchased DivX movies, rst register

your device at vod.divx.com. Find your

registration code in the DivX VOD section of

your device setup menu.

DivX Certied®to play DivX®video up to HD

1080p, including premium content.

DivX®, DivX Certied®and associated logos

are trademarks of DivX, LLC and are used

under license.

Covered by DivX Patents 7,295,673;

7,515,710; RE45,052; and others available

at [www.divx.com/patents]

The terms HDMI and HDMI High-Denition

Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

• Image shown may differ from your projector.

• Your projector’s OSD (On Screen Display) may differ slightly from

that shown in this manual.

NOTE

SAFETYPRECAUTIONS

Please take note of the safety instructions to prevent any potential accident

or misuse of the projector.

• Safety precautions are given in two forms, i.e., WARNING and CAUTION

as detailed below.

WARNING Failure to follow the instructions may cause serious

injury and even death.

CAUTION Failure to follow the instructions may cause personal

injury or product damage.

• Read the owner's manual carefully and keep it on hand.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning ash with

arrowhead symbol, within

an equilateral triangle, is

intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sufcient

magnitude to constitute a risk of

electric shock to persons.

The exclamation point

within an equilateral

triangle is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

WARNING/CAUTION

-TO REDUCE THE RISK

OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE

THIS PRODUCT TO RAIN OR

MOISTURE.

Readtheseinstructions.

Keeptheseinstructions.

Heedallwarnings.

Followallinstructions.

IndoorInstallation

WARNING

• Do not use the projector outside

and do not expose the product

to any humidity or water.

-Since the product is not

waterproof, this may result in

a re or electric shock.

• Do not place the projector in

direct sunlight or near heat

sources such as radiators, res,

stoves, etc.

-This may result in re.

• Do not place flammable

materials such as aerosols near

the projector.

-This may result in re.

4SAFETYPRECAUTIONS

• Do not allow children to cling to

or climb up to the projector.

-This may cause the projector

to fall, causing injury or death.

• Do not install the product in a

place with no ventilation (e.g.,

on a bookshelf or in a closet) or

on a carpet or cushion.

-This may result in re due

to the increase in internal

temperature.

• Do not place the product close

to sources of steam, oil or oil

mist, such as humidiers and

kitchen counters.

-Failure to do so may result

in re, electric shock, or

corrosion.

• Do not install the product onto

a wall or ceiling that is close to

sources of oil or oil mist.

-The product may be

damaged and fall, resulting in

serious injury.

• Do not place the projector where

it might be exposed to dust.

-This may result in re.

• Do not use the projector in a

damp place such as a bathroom

where it is likely to get wet.

-This may result in re or

electric shock.

• Do not allow a tablecloth or

curtain to block the air vent.

-This may result in re due to

the increase in the internal

temperature.

• Ensure good ventilation around

the projector. The distance

between the projector and the

wall should be at least 30 cm.

-This will prevent re due to

the increase in the internal

temperature.

CAUTION

• When placing the projector on a

table or shelf, be careful not to

put it near the edge.

-The projector could fall due

to balance problems, which

may cause personal injury or

damage to the product. Make

sure to use the projector

cabinet or stand that ts the

projector.

• When moving the projector,

make sure to switch it off and

remove the power plug and

cords.

-The power cord may be

damaged, resulting in re or

electric shock.

• Do not place the projector on

an unstable or vibrating surface

such as a wobbly shelf or a

slope.

-It may fall and cause injury.

• Be careful not to tip the projector

over when connecting external

devices to the projector.

-This may cause personal

injury or damage to the

projector.

SAFETYPRECAUTIONS

Power

WARNING

• DISCONNECTING THE

DEVICE FROM THE MAIN

POWER

-The Power plug is the

disconnecting device. In case

of an emergency, the Power

Plug must remain readily

accessible.

• The grounding wire should be

connected. (Except for devices

which are not grounded.)

-Ensure that you connect the

grounding cable to avoid

electric shock.

If it is not possible to ground

the unit, have a qualified

electrician install a separate

circuit breaker.

Do not try to ground the

projector by connecting it to

telephone wires, lightning

rods, or gas pipes.

• The power plug should be

inserted fully into the power

outlet.

-An unstable connection may

cause a fire.

• Do not place heavy objects on

the power cord.

-This may result in re or

electric shock.

• Never touch the power plug with

wet hands.

-This may result in electric

shock.

• Do not plug too many devices

into one multi-power outlet.

-This may result in re due to

the power outlet overheating.

• Keep the AC adapter, power

plug, and the used power outlet

clean from dust or foreign

materials building up.

– This may result in re.

• If there is any smoke or a

burning smell from the projector

or AC adapter, stop using the

product immediately. Disconnect

the power cord from the power

outlet, and then contact the

customer service center.

– This may result in re.

• To turn off the main power,

remove the power plug, which

should be positioned so it is

easy to access for operation.

6SAFETYPRECAUTIONS

CAUTION

• Always grab the plug to remove

the AC adapter or power cord.

– Otherwise, this may result

in a re or may damage the

product.

• Refrain from constantly bending

the power cord of the AC

adapter.

– If the power cord is bent

excessively for a long period

of time, the cord may break

inside. This may result in a

re or electric shock.

• Ensure the power cord and plug

are not damaged, modified,

severely bent, twisted, pulled,

sandwiched or hot. Do not use

the product if the power outlet

is loose.

– This may result in re or

electric shock.

• Keep the power cord away from

heating devices.

-The wire's sheath may melt,

which may result in re or

electric shock.

• Place the projector where

people will not trip over or step

on the power cord to protect the

power cord and plug from any

damage.

-This may result in re or

electric shock.

• Do not turn the projector on or

off by plugging in the power plug

or unplugging it from the power

outlet. (Do not use the power

plug as a switch.)

-This may result in electric

shock or damage to the

product.

• Do not insert a conductor

into the other side of the wall

outlet while the power plug is

inserted into the wall outlet.

In addition, do not touch the

power plug immediately after it

is disconnected from the wall

outlet.

-This may result in electric

shock.

• Only use the official power cord

provided by LG Electronics. Do

not use other power cords.

-This may result in re or

electric shock.

• If any water or foreign materials

have gone into the AC adapter,

power cord, or the interior of the

projector, turn off the projector

by pressing the power button.

Remove all the cables, and then

contact the customer service

center.

– This may result in re or

electric shock.

SAFETYPRECAUTIONS

• The surface of the AC adapter is

hot. Keep the AC adapter out of

the reach of children and avoid

touching it during use.

• Never disassemble the power

supply devices (AC adapter/

power cord, etc.).

– This may damage the power

cord and result in a re or

electric shock.

• Connect the AC adapter and the

power cord firmly.

– Not doing so may result in a

product failure or re.

• Do not place heavy objects

or put pressure on the power

cord and AC adapter and avoid

damage.

– This may result in a re or

may damage the product.

• Always use the AC adapter

provided or any AC adapters

approved and certified by LG

Electronics.

– Any other AC adapter

connected may result in the

screen ickering.

WheninUse

WARNING

• Do not place anything

containing liquid on top of the

projector such as a vase, flower

pot, cup, cosmetics, medicine,

or ornaments, candles, etc.

-This may result in re or

electric shock, or cause injury

due to falling.

• In the event that there is a

heavy impact or the cabinet is

damaged, switch it off, unplug

it from the power outlet and

contact an authorized service

center.

-This may result in electric

shock.

• Do not insert pieces of metal

such as coins, hairpins, or metal

debris, nor ammable materials

such as paper or matches into

the projector.

-This is to prevent electric

shock or re.

• Make sure that a child does

not swallow the batteries when

you replace the old remote

control batteries with new ones.

Keep batteries out of reach of

children.

-If a child swallows a battery,

consult a doctor immediately.

8SAFETYPRECAUTIONS

• Never open any cover on the

projector.

-There is a high risk of electric

shock.

• Do not look directly into the lens

when the projector is in use.

-The bright light may damage

your eyes.

• When the lamp is on or has just

been turned off, avoid touching

the air vent or lamp, because

these will be very hot.

• If there is a gas leak in the

room with the projector, do not

touch the projector or power

outlet. Open the windows for

ventilation.

-Sparks may cause re or

burns.

• Unplug the power cord from the

outlet during a lightning storm.

-This will prevent shock or

damage to the projector.

• Do not use the projector near

electronic devices that generate

a strong magnetic eld.

• Keep the plastic film used for

packaging the projector out of

the reach of children.

– If not handled safely, it can

cause suffocation.

• Do not keep your hand on the

projector for a long time when it

is running.

• When you play a game by

connecting a game console to

a projector, it is recommended

that you maintain a distance

of more than four times the

diagonal length of the screen.

-Make sure that the

connecting cable is long

enough. Otherwise, the

product may fall causing

personal injury or damage to

the product.

• Do not place the projector or its

remote control with battery in

an extremely high temperature

environment.

-This may result in re.

• Do not use 3D glasses if you do

not watch 3D.

SAFETYPRECAUTIONS

CAUTION

• Do not place heavy objects on

the projector.

-It may fall down and cause

personal injury.

• Be careful not to allow any

impact to the lens during

transport.

• Do not touch the lens of the

projector.

-The lens may be damaged.

• Do not use any sharp tools on

the projector such as a knife

or hammer, because this may

damage the casing.

• In the event that no image

appears on the screen or no

sound is heard, stop using

the projector. Switch off the

projector, unplug it from the

power outlet and contact our

service center.

-This may result in re or

electric shock.

• Do not drop anything onto the

projector or allow anything to

bang into the projector.

-This may cause damage

to the projector or personal

injury.

• It is recommended that you

maintain a distance of more

than 5 to 7 times the diagonal

length of the screen.

– If you watch the screen at

a close distance for a long

time, your eye sight may

become worse.

• Do not block the light beam

emitted from the projector using

a book or other object.

-Lengthy exposure to the

projector beam may result in

re. In addition, the lens may

be overheated and damaged

by the reected heat. Disable

the AV function to stop

projection temporarily or turn

off the power.

• Do not start the projector with

the volume turned up high.

-High volume may damage

hearing.

• Do not use high voltage

electrical equipment near the

projector, (e.g., a bug zapper).

This may result in product

malfunction.

• Do not insert your finger into the

air vent (inflow/outflow vents).

-This may cause injury or a

product malfunction.

10 SAFETYPRECAUTIONS

Cleaning

WARNING

• Do not spray the projector with

water when cleaning. Make sure

water does not flow into the

projector.

-This may result in re or

electric shock.

• When there is smoke or a

strange smell coming out from

the projector or a foreign object

falls into the projector, please

switch it off and unplug it from

the power outlet and contact our

service center.

-Otherwise, this may result in

re or electric shock.

• Use air spray, a soft cloth, or

a cotton swab moistened with

a lens cleaning chemical or

alcohol to remove dust or stains

on the front projection lens.

CAUTION

• Contact your seller or our

service

center once a year to

clean the internal parts of the

projector.

-If you do not clean the

projector for a long period of

time, dust will accumulate,

which may result in re or

damage to the projector.

• When cleaning plastic parts

such as

the projector case,

unplug the power rst and wipe

with a soft cloth. Do not spray

with water or wipe with a wet

cloth. Never use glass cleaner,

automobile or industrial polish,

abrasives, wax, benzene, or

alcohol as these can damage the

projector.

-This can result in re, electric

shock or cause damage to

the product (deformation and

corrosion).

• Remove the plug from the outlet

before cleaning the product.

-Otherwise, this may result in

electric shock.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LG Projecteur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur