LG LN500 Series Manuel utilisateur

LN500 series

Upgrading map

Please read this instruction

booklet carefully and completely

before connecting, operating or

adjusting this product.

LN500_LGEAG_ENG_MFL42172808

P/N : MFL42172808

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

PORTUGUÊS

NEDERLANDS

SLOVENIAN

3 Package contents

3 The Steps for upgrade

4-5 Safety note

6-7 PC application installation

8-13 Firmware Upgrade

14 Upgrading application of navigation and

map

The product is made for upgrading map and navigation of LN500

series.

LN500 and LN505 are upgraded when you insert the SD card into the

device automatically after firmware.

LN510 and LN515 are upgraded by replacing the old SD card with the

bundled new one.

Firmware version : 2.0.0

Operating environment : WINDOWS 2000 / XP / VISTA(32bit)

Package contents

1) SD memory card

- Map (Navigation program included)

- Software (for upgrading device firmware)

2) Owner’s Manual

3) Quick Setup Guide (for Navigation software)

- QSG(PDF file) is included in SD card.

4) Map CD (Optional)

The steps for upgrade

1) Device Firmware Upgrade : Upgrade it after S/W installation.

2) Upgrading navigation application and map : Insert bundled new

SD memory card. The process to upgrade is different depend on

models. Refer to the Page 14 for more information.

Safety note

1) The power should be supplied during upgrading Firmware.

- Connect cigar cable or DC adapter to device.

- Fully charge the device when using the built-in battery of it.

2) Do not disconnect USB cable during upgrade.

If the USB cable is disconnected during upgrade, the error mes-

sage will be shown. Click [OK] to let the application to be termi-

nated automatically.

- Error message : USB is disconnected! Close to terminate the

application.

1) For detail the direction (about map handling), see User’s Manual

in LGE PC portal on CD.

2) Do not close the program during upgrade.

If you activate the upgrade program again after closing it forcibly,

the error message will be displayed. When you enter the STEP 5,

the error message is displayed as shown below.

- Error message : During upgrade the program is closed abruptly.

Please push the reset button to restart it.

1) TMC will not be supported on this unit even after upgrade is com-

pleted by the software.

- Even if TMC button is displayed on menu, the function is not

available.

2) [Navi Menu - Setup - Display - Day&Night - Auto] on navigation

menu may not be available even after upgrade is completed by

the software.

3) The information of [Setup - Extras - Tutorial] on navigation menu

may be different from that of the navigation software of the

upgraded device.

PC application installation

1) Click the “Setup.exe” for instal-

lation.

2) When LG PND Firmware

upgrade is displayed, click

[NEXT] to move to the next

step.

3) Select the installation path.

- You can enter the path direct-

ly or click [Browse].

- The default folder is <C:\pro-

gram files\LG PND\LG PND

Firmware Upgrade>.

4) When the installer is ready to

install, click <Next> to start

installation.

5) LG PND Firmware Upgrade is

being installed.

6) Click [Close] to finish installa-

tion when the message as

below is displayed.

Firmware Upgrade

<STEP 1: The guide for con-

necting device>

1) Start Firmware Upgrade appli-

cation (START -> PROGRAM-

> LGPND -> FIRMWARE

UPGRADE).

Or click the shortcut icon on

desktop.

2) After do application, the con-

necting method will be shown.

Please turn off your device.

Connect the device to PC with

USB cable.

- Click [NEXT] to move to next

step.

* Click [CANCEL] in any steps to cancel for upgrading.

3) Press and hold the volume(-)

key, then press reset button.

Please turn on the device ( or

press the reset button on the

unit)while pressing and holding

the volume (-) button.

- The software will automatically

activate USB connection.

- When USB is connected, you

can move to next step automati-

cally.

- In case that you connect USB

for the first time, you can move

to the <STEP 4> after installing

the USB driver in <STEP 3>.

- If USB is not connected, you

cannot move to the next step.

<STEP 3: Installation of the

USB driver when you activate

the application for the first

time.> 1. Computer recognizes the

device automatically when you

connect USB for the first time.

2. The installer starts installing

the driver.

3. Select the recommend item

and click [NEXT]. The driver is

automatically installed.

- When the pop-up window as

below appears, click [Continue

Anyway].

4. After installation is finished,

click [FINISH].

5. Then, you can move to the

next step.

Autres manuels pour LN500 Series

Table des matières

Langues :

Autres manuels LG GPS

LG LN830 Manuel utilisateur

LG N11 Manuel utilisateur

LG N10 Manuel utilisateur

LG LN790 Series Manuel utilisateur

LG LN740 Series Manuel utilisateur

LG N10 Manuel utilisateur

LG LN500 Series Manuel utilisateur

LG LN740 Series Manuel utilisateur

LG LN835R Manuel utilisateur

LG LN700 Manuel utilisateur

LG 550 Series Manuel utilisateur

LG LN730 Manuel utilisateur

LG LN735 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur