LG 32ML5K Manuel utilisateur
2
ENGLISH
TABLE OF CONTENTS
BASIC .............................................3
- Checking the Accessories ............................................3
- Learning the Buttons......................................................4
GETTING READY ...........................5
- Connecting the IR Sensors..........................................5
- Mounting and Removing the LG Logo
Bracket ...................................................................................6
CHECKING BEFORE
INSTALLATION ..............................7
- Installation Orientation .................................................7
- Installation Location........................................................8
- Wall Mount Holder ..........................................................9
PRECAUTIONS FOR USE............ 10
- Dust.......................................................................................10
- Afterimage ........................................................................10
PRODUCT SPECIFICATIONS...... 12
LICENCE...................................... 15
3
ENGLISH
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
BASIC
NOTE
•The accessories provided with your product may vary depending on the model or region.
•Product specifications or contents in this manual may be changed without prior notice due to upgrade of product
functions.
•SuperSign Software & Manual
- Visit http://partner.lge.com to download the latest SuperSign software and manual.
•For POE++ application, Cat5e or higher LAN cables must be used, and Cat6 and 23AWG or higher cables are
recommended.
•To meet the EMI standard, for LAN cables exposed to the outside of a wall, a cable of 2m (6.5feet) or less in length
and FTP or STP grade must be used.
•When purchasing PSE equipment, it is necessary to purchase Class 6 (60W) or higher, and for more stable
performance, Class 7 (75W) or higher is recommended. The length of the LAN cable must be 100m (328feet) or
less. The longer the cable, the greater the power loss, so using the shortest possible cable is recommended.
Checking the Accessories
RGB RS-232C/D-Sub RS-232CRS-232C
Depending on country
4
ENGLISH
Learning the Buttons
The illustrations may differ depending on the model.
Screen Button
•: Changes the input signal.
•: Opens the main menu or saves the input selection and exits the menu.
•: Adjusts up and down.
•: Moves left or right.
•: Shows the signal and mode information currently set and allows the user to select a menu.
•: Turns the power on and off.
5
ENGLISH
GETTING READY
Connecting the IR Sensors
Connecting the cable to the product allows it to receive signals from the remote control.
Rotate the IR sensor according to horizontal or vertical use.
- The illustrations may differ depending on the model.
Default Mount - Horizontal Use
(Front) (Back)
Vertical Use
(Front) (Back)
6
ENGLISH
Mounting and Removing the LG Logo Bracket
- Applies only to some models.
- The illustrations may differ depending on the model.
Removing the LG Logo Bracket
Place a clean cloth on the floor, and remove one screw from the LG logo bracket on the lower back of the monitor with
a screwdriver.
LG Logo Bracket
Mounting the LG Logo Bracket on the Right
Screw the LG logo bracket into the hole on the right.
LG Logo Bracket
7
ENGLISH
CHECKING BEFORE INSTALLATION
We are not responsible for product damage caused by failure to follow the guide.
Installation Orientation
Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen.
Tilt Angle
40 mm
15˚
Ceiling, Floor Orientation
8
ENGLISH
Installation Location
We are not responsible for product damage caused by failure to follow the guide.
Indoor
Installing on a Wall
A
C
B
BB
A
A: 40mm (1.5inches)or more
•The warranty will not cover any damage
caused by using the product in direct sunlight
on the front panel.
Installing on a Recessed Wall
A
C
B
BB
A
A: 40mm (1.5inches) or more
B: 50mm (1.9inches) or more
C: 70mm (2.7inches) or more
•The warranty will not cover any damage
caused by using the product in direct sunlight
on the front panel.
Outdoor
Outdoor Enclosed
9
ENGLISH
Wall Mount Holder
To install the monitor on a wall, attach a wall mount holder (optional) to the back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely fixed to the monitor and to the wall.
The VESA dimensions of the wall mount by model are as follows.
A
B
Model VESA Dimensions
(A x B) (mm)
Standard
Dimensions
Length (Maximum)
(mm) Quantity
32ML5K
200x200 M6 21.3 4
VESA Dimensions
(A x B) (inches)
Standard
Dimensions
Length (Maximum)
(inches) Quantity
7.8x7.8 M6 0.8 4
CAUTION
•Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
•If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
•Damage to the monitor by tightening the screws too tightly may void your warranty.
•Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse
of inappropriate components is not covered by the warranty of this product.
NOTE
•Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
•For more information on installation, please refer to the user manual for the wall mount.
10
ENGLISH
PRECAUTIONS FOR USE
Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Afterimage
•After-image appears when the product is turned off.
- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screen-
saver function.
- Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause
an afterimage. This is normal due to the display characteristics of this product.
•When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between
the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time
and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called
an afterimage.
•Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed
for a long time. The following are operational recommendations for reducing the occurrence of afterimages when
using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better
for preventing afterimages.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels LG Affichage numérique
LG
LG 86UH5E Manuel utilisateur
LG
LG M5520CCBA Manuel utilisateur
LG
LG 55SVH7PF Manuel utilisateur
LG
LG 55LS75C Manuel utilisateur
LG
LG 49VM5C-B.ATC Manuel utilisateur
LG
LG 65EE5PC Guide de démarrage rapide
LG
LG 55XE4F-B Manuel utilisateur
LG
LG 75XE3C Manuel utilisateur
LG
LG 55VL7F-A Manuel utilisateur
LG
LG 55VH7E Manuel utilisateur
LG
LG 86XF3SK Manuel utilisateur
LG
LG 55EV5C Manuel utilisateur
LG
LG 110UM5J-B.AAUQ Manuel utilisateur
LG
LG 10SM3TB Manuel utilisateur
LG
LG 98UH5E Guide de démarrage rapide
LG
LG TSP510-M Manuel utilisateur
LG
LG 55VM5E Manuel utilisateur
LG
LG 42WT30MS-B Manuel utilisateur
LG
LG 42SH7DB-M Guide de démarrage rapide
LG
LG 55EF5F-L Manuel utilisateur
Manuels Affichage numérique populaires d'autres marques
SMART-AVI
SMART-AVI SIGNAGEPRO Manuel utilisateur
KeyWest Technology
KeyWest Technology BREEZE Manuel utilisateur
XtendLan
XtendLan XL-DSP-183C Manuel utilisateur
Dynascan
Dynascan DS861LR4 Manuel utilisateur
Classic Exhibits
Classic Exhibits SEGUE DESIGNS MOD-1363 Manuel utilisateur
protech
protech KT-7290 Manuel utilisateur
