LG LS700 Manuel utilisateur

User Manual

LS700

Body-worn Operation

This device was tested for typical body-worn operations with the back of the phone kept 0.79

inches (2cm) from the body. To comply with FCC RF exposure requirements, a minimum

separation distance of 0.79 inches (2cm) must be maintained between the user’s body and the

back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips,

holsters and similar accessories containing metallic components should not be used. Body-worn

accessories that cannot maintain 0.79 inch (2cm) separation distance between the user’s body

and the back of the phone, and have not been tested for typical body-worn operations may not

comply with FCC RF exposure limits and should be avoided.

FCC Part 15.19 statement

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the

following two conditions: (1) This device and its accessories may not cause harmful interference,

and (2) this device and its accessories must accept any interference received, including

interference that cause undesired operation.

FCC Part 15.21 statement

Changes or Modifications that are not expressly approved by the manufacturer could void the

user's authority to operate the equipment.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device,

pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful i nterference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference or television reception, which can be d etermined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Getting Started

View of Phone

1. PWR/Lock Switch: Lets you power the phone on or off.

2. Antenna: Retractable antenna provides optimum reception for 800 MHz & 1900 MHz frequencies.

3. Headset Jack: Provides connection for an optional headset.

4. Volume Control Keys: Adjust the Ring Volume in the Main Menu or the Voice Volume during a call.

The keys also scroll through mouths in the Calendar or pages in the MiniBrowser.

5. Menu: Show menus that is associated with a current activity

6. Home: Returns to the main home screen

7. Back: Lets you clear an entry or back-up in the menu.

8. Search: Brings up the search function

Installing and Removing the Battery

To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then,

push the battery down until the latch clicks.

To remove the battery, press down on the latch and remove the battery from the phone.

Turning Your Phone On and Off

To turn your phone on, push the PWR/Lock Switch (near the antenna) until a logo shows on the display.

Your phone performs a short self-test before letting you know it is operational.

If your phone does not turn on, make sure the battery is installed correctly and is adequately charged or

has external power (via the AC Adapter, Cigarette Lighter Adapter or Hands-Free Car Kit).

To turn your phone off, push the PWR/Lock Switch until a pop-up message shows, then choose the menu

“Power Off” and “OK”.

Main Menu

When your phone acquires Service, the Greeting (a banner of text), the current time and date and the

Main Menu are displayed. If you are in authorized digital cellular provider’s service area, you are ready to

send and receive calls.

Power Save Mode

When the phone is in an area without service for 15 minutes, it stops searching for service and enters into

the power Save Mode. When your phone activates this feature, Power Save is displayed on your screen.

The phone automatically checks for service periodically or you can check manually by pressing any key.

Entering Characters Using the Keypad

To enter a letter, punctuation or number when creating Contacts or Scheduler entries, press the

corresponding key on the screen keyboard. By default, the first letter of a word is capitalized and

following letters are lowercase. Characters in the following layout:

1) Letters

2) Numbers

If you make a mistake, press to erase a character. To clear the entire entry, press and hold .7

Press to switch the layout from Letters to Numbers.

Press to switch the layout from Numbers to Letters.

Display Icons

Display icons are the symbols your phone uses to communicate important information. They are as

follows:

ICON DESCRIPTION

Alarm

Battery

Antenna

No service

In use

Voice Privacy

TTY

Using Your Phone

Placing a Call

When the phone is on, Signal strength icon on the display shows that whether you are in a Service Area or

not. The area may include an authorized PCS CDMA provider’s service area.

1. At Home Screen or Menu Screen.

2. Touch Phone

3. At Phone Screen, Enter digits.

4. Touch Send key.

5. Dialing

6. If you want call end, press MENU key and Touch Call End or press Power PWR/Lock key on top of

phone

Roaming With Your Phone

Your Phone is you can use it to make and receive calls in many places.

Calling Experience

When you use your phone on other PCS CDMA networks, your calling experience and call quality will be

quite similar to what you experience when making calls within the Network. Although certain calling

features may not be available, your phone calls are still private and secure.

Correcting Dialing Mistakes

To delete one digit at a time, press . To delete all digits, press and hold .

Redialing Last Outgoing Number

Touch Send key 2 times.

In Call Options

During a call, your phone displays menu options in addition to the Main Menu.

To select an option, touch an appropriate menu.

 End Call - Ends the call.

 Contacts – Browse your contacts.

 Mute or Unmute – Select Mute to mute your phone’s microphone. Select Unmute to reactivate the

microphone.

 Dialpad - 3-Way Call – Lets you dial another phone number.

Send Tones – Sends the next set of numbers after a Hard Pause. (See “Dialing and Saving

Phone Numbers With Pauses “ on the previous page.)

 Flash – Answers an incoming Call Waiting call or connects the third party for Three-Way Calling.

 Speaker – Let you speak and listen on Speaker phone mode

Incoming Call Notification

Depending on your settings, your phone notifies you of incoming calls in the following ways:

 The phone rings or vibrates

 The LED flashes green

 The backlight illuminates

 The screen displays an incoming call message

 The phone number of the caller is displayed if available

 The caller’s name is displayed if the phone number is in your Contacts

The following options are also displayed. To select an option, touch the appropriate button

 Answer – answers the call.

 Ignore – ignores the ringer.

Note: You can mute the ringer by pressing the up or down Volume Control key.

Answering Calls

To answer incoming calls, touch the button [Answer].

To answer incoming roam calls, highlight Answer and press [SEND].

Displaying Your Phone Number

To display your phone number:

1. From the Main Menu, select Settings.

2. And touch the menus as follows

(About phone – Status – My phone number)

Setting the Ring Volume to Vibrate

To set the phone to Vibrate Mode, press the down side of Volume Control key until is displayed.

The phone will vibrate and – is displayed above the Main Menu.

To set the phone to Vibrate Mode using the Main Menu, see “Adjusting the Volume”.

Table des matières

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Manuel utilisateur