LEYBOLD TURBOVAC 850 i Manuel utilisateur

Part Nos.

840071V1000 /V2000

840081V1000 /V2000

840091V1000 /V2000

840111V1000 /V2000

TURBOVAC i

TURBOVAC 850 i, 950 i

Turbomolecular Pumps with Integrated

Frequency Converter

Operating Instructions 300855170_002_C4

Contents

2 300855170_002_C4 - 06/2020 - © Leybold

Page

0 Important Safety Information 5

Safety symbols 5

0.1 Mechanical hazards 6

0.2 Electrical hazards 7

0.3 Thermal hazards 7

0.4 Danger through materials and substances 7

0.5 Dangers in connection with safety-related

measures and precautions 7

1 Description 8

1.1 Design 9

1.2 Standard equipment 9

1.3 Technical data 10

1.3.1 Technical data for the integrated drive electronics 11

1.3.2 Pumping speed curves 12

1.3.3 Operation diagrams 13

1.4 Ordering data 16

1.5 Accessories 16

2 Transport and storing 19

3 Installation 20

3.1 Conforming utilization 20

3.1.1 Non-conforming utilization 20

3.2 Operating environment 21

3.3 Fitting accessories 21

3.4 Attach the pump to the vacuum chamber 22

3.5 Forevacuum connection 27

3.6 Connect the cooling 28

3.6.1 Air cooling 28

3.6.2 Water cooling 29

3.6.3 Water Quality 30

3.7 Connect a power failure venting valve or a venting valve 32

3.8 Connect purge gas 33

3.9 Connect a flange heater 34

3.10 Electrical connection 34

Contents

3300855170_002_C4 - 06/2020 - © Leybold

The TURBOVAC allows through both standard and optional interfaces con-

trolling of the pump and setting up of some pump functions according to

specific requirements. The Operating Instructions 300450826 Serial

Interfaces for TURBOVAC i/iX offers detailed information on the RS 232,

RS 485, Profibus and USB interfaces of the TURBOVAC.

The Operating Instructions 300687441 TURBOVAC iX EtherCAT Interface

offers information on the EtherCAT Interface.

These Operating Instructions are a translation of the German original instruc-

tions 300855170_001_C4.

4 Operation 39

4.1 Media compatibility / purge gas 39

4.2 Interfaces 39

4.3 Switching on 41

4.4 Shutting down 42

4.5 Venting 43

4.6 Bakeout 44

4.7 Operation after a longer storage period 44

4.8 Removing the pump from the system 45

5 Maintenance 46

5.1 Cleaning 46

5.2 Leybold Service 46

5.3 Bearing monitoring and conditioning 47

6 Troubleshooting 49

7 Waste Disposal 51

China RoHS Material Content Declaration 51

Certificates 52

EU Declaration of Conformity 53

Safety Information

4 300855170_002_C4 - 06/2020 - © Leybold

Obligation to Provide Information

Before installing and commissioning the pump, carefully read these

Operating Instructions and follow the information so as to ensure optimum

and safe working right from the start.

The Leybold TURBOVAC has been designed for safe and efficient operation

when used properly and in accordance with these Operating Instructions. It is

the responsibility of the user to carefully read and strictly observe all safety

precautions described in this section and throughout the Operating

Instructions. The pump must only be operated in the proper condition and

under the conditions described in the Operating Instructions. It must be oper-

ated and maintained by trained personnel only. Consult local, state, and

national agencies regarding specific requirements and regulations. Address

any further safety, operation and/or maintenance questions to our nearest

office.

“Trained personnel” for the operation of this pump are

■skilled workers with knowledge in the fields of mechanics, electrical engi-

neering and vacuum technology and

■personnel specially trained for the operation of vacuum pumps.

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTICE is used to notify users of installation, operation, programming or

maintenance information that is important, but not hazard related.

We reserve the right to alter the design or any data given in these Operating

Instructions. The illustrations are not binding.

Retain the Operating Instructions for further use.

NOTICE

WARNING

CAUTION

NOTICE

Safety Information

5300855170_002_C4 - 06/2020 - © Leybold

0 Important Safety Information

Safety symbols

The safety symbols on the products shows the areas where care and atten-

tion is necessary.

The safety symbols that follow are used on the product or in the product

documentation.

General warning sign

Warning vacuum

Warning of falling loads

Warning - Dangerous voltage

Warning - Hot surfaces

Warning - Risk of explosion

Safety Information

6 300855170_002_C4 - 06/2020 - © Leybold

0.1 Mechanical hazards

WARNING: EJECTION OF PARTS

If the mounting is not sturdy enough, pump blockage could cause the pump to break loose;

internal pump components could be thrown in all directions.

Mount the pump firmly to the vacuum chamber. Never operate the pump without proper flanging

to the vacuum chamber (in bench testing, for example).

In case of rotor destruction a sudden twisting of the entire pump is possible. The vacuum cham-

ber must be able to absorb the torque of max. 10 kNm around the rotor‘s axis of rotation in the

event of sudden rotor destruction.

CAUTION: CUTTING AND CRUSHING

When reaching into open flanges there is a risk of cutting and crushing your fingers.

Do not operate the vacuum pump with open flanges. Do not reach into the pump.

When installing the vacuum pump, first mechanically connect the inlets and outlets and then

make the electrical connections.

Disconnect the vacuum pump from the power supply before servicing. Only use trained service

personnel.

Before servicing, ensure that gas cannot flow through the pump. Only open the pump system

when it is under atmospheric pressure.

CAUTION: EJECTION OF PARTS

Ejection of parts through bursting of vacuum system as a result of excessive pressure.

When using the pump with purge gas, protect the purge gas supply such that in the event of a

malfunction no overpressure can occur within the system. The pressure in the pump must not

exceed 1.4 bar (absolute).

CAUTION: VACUUM

Pulling into the vacuum can cause injury to hands or fingers.

Do not operate the vacuum pump with open flanges.

CAUTION: FALLING PARTS

Errors during transport can cause the pump to fall down.

Transport the pump only in its transport packaging or at the eye-bolts provided for this purpose.

Safety Information

7300855170_002_C4 - 06/2020 - © Leybold

0.2 Electrical hazards

CAUTION: ELECTRICAL SHOCK

Contact with live parts may lead to electrical shock.

The electrical connection may only be carried out by a trained person. Observe the national reg-

ulations in the user country, e.g. for Europe EN 50110 - 1. Prior to servicing, disconnect the

vacuum pump from the power supply.

Electrical shock due to interruption of the protective conductor system. In the event of a fault,

life-threatening voltages may be present on electrically conductive components.

Before commissioning, check the resistance of the earthing cable and the suitability of the

assigned overcurrent protection device.

The pump must only be connected to power supplies which meet the requirements for functional

extra-low voltages with positive isolation in accordance with IEC 60364-4-41 (or local regulations)

(PELV). All interfaces must only be operated with PELV-fed components and devices.

0.3 Thermal hazards

CAUTION: BURNS

Touching hot surfaces may lead to burns.

Handle the pump only when ventilated and cooled down.

Wear suitable protective equipment.

0.4 Danger through materials and substances

WARNING: HAZARDOUS SUBSTANCES

Pumped process gases may escape from the exhaust and leaks in the vacuum system.

During servicing, toxic deposits may be present in the pump. The gases, vapours or substances

may be hazardous to health.

The pumping of toxic / explosive / flammable / pyrophoric / radioactive / oxidizing / corrosive

gases or gas mixtures, as well as oxygen of more than atmospheric concentration (21 %) is gen-

erally prohibited. The operator is responsible for assessing the hazard potential of the process

media or mixtures.

0.5 Dangers in connection with safety-related

measures and precautions

CAUTION: AUTOMATIC START-UP

The frequency converter is not equipped with its own emergency shut down switch. This may

lead to an unwanted pump start-up.

Install an emergency shut down switch in the system. The emergency shut down switch must be

■present in the building installation

■suitably arranged and easily accessible for the user

■marked as the disconnecting device for this device.

Description

8 300855170_002_C4 - 06/2020 - © Leybold

1 Description

The TURBOVAC 850 i and 950 i are turbomolecular pumps designed to

evacuate vacuum chambers down to pressure levels in the high vacuum and

ultra-high vacuum range.

They are suitable for pumping air and clean gases. A forevacuum pump and

a power supply are required for their operation.

Fig. 1.1 TURBOVAC models

TURBOVAC 850 i

DN 160 ISO-K

TURBOVAC 850 i

DN 160 CF

TURBOVAC 950 i

DN 200 ISO-K

TURBOVAC 950 i

DN 200 CF

TURBOVAC 850 i

with optional interface

Description

9300855170_002_C4 - 06/2020 - © Leybold

1.1 Design

The TURBOVAC models are wide-range TMPs equipped with an additional

Holweck stage.

With the built-in frequency converter as the electronic drive the TURBOVAC

forms one single unit. The electonic drive governs the pump’s speed and

serves as a monitor for all functions of the pump.

At the high vacuum side the bearing is of a non-wearing permanent magnetic

bearing type, at the forevacuum side a lifetime lubricated oil-free ceramic ball

bearing is used.

Water cooling or an air cooling fan is available as optional equipment.

The intake flange should be fitted with a wire mesh inlet screen to protect the

pump against mechanical damage caused by foreign objects.

The pumps are equipped with a venting and a purge gas facility. The connec-

tions are blanked off by default with G1/8” closure screws.

Venting and purge gas valves, or a venting screw, or a pressure regulator can

be connected directly to the pump.

1.2 Standard equipment

Turbomolecular pump with integrated electronic drive unit, two eye-bolts

High and fore-vacuum flanges are protective-capped.

Flange mounting elements, the DC In plug and the inlet screen are not

enclosed, but are available as accessories, see Section 1.5.

Description

10 300855170_002_C4 - 06/2020 - © Leybold

1.3 Technical data

TURBOVAC 850 i 950 i

High-vacuum connection DN 160 ISO-K

160 CF

200 ISO-K

200 CF

Forevacuum connection DN 25 KF

Pumping speed*

I · s-1

720

655

850

755

900

840

925

770

Gas throughput*

mbar · I · s-1

3.5

> 15

Compression ratio*

> 1·1011

1.3·108

4.4·106

Ultimate pressure with 2-stage oil-sealed rotary

vane pump ISO-K / CF mbar 3·10-8 / 3·10-10

Max. permissible

forevacuum pressure for N2

mbar 15

Operating speed min-1 49 200

Minimum speed min-1 30 000

Run-up time, approx. min 2.5

Max. power consumption W500 (default), 600 (max.)

Power consumption at ultimate pressure W 40

Type of protection IP 40

Ambient temperature

during operation

storage

°C

+5 to +401)

-15 to +70

Cooling standard Convection1)

Cooling optional Air or water1)

Cooling water connection plug connection for 6x1 hose /

alternatively G 1/8-in. screw-in thread

Cooling water consumption l/h 60

Permissible cooling water pressure

(bar(g): bar (gauge) is overpressure,

i.e. atmospheric pressure = 0 bar(g))

bar(g) 6

Permissible cooling water temperature °C 15 to 35

Weight ISO-K / CF kg 14.6 / 19.6 15.4 / 21.7

Recommended forevacuum pumps ECODRY 65 plus, TRIVAC D 65 B,

SCROLLVAC 7 plus, DIVAC 3.8 HV3

* Please contact us when using Argon or other “heavy” gases as process gas.

1) * Depending on the ambient temperature, the gas throughput and the type of gas, forced air cooling or water cooling may be necessary.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LEYBOLD Pompe à eau

LEYBOLD

LEYBOLD SOGEVAC SV 200 BR2 Manuel utilisateur

LEYBOLD

LEYBOLD EcoDry - M Series Manuel utilisateur

LEYBOLD

LEYBOLD MAG integra Series Manuel

LEYBOLD

LEYBOLD SOGEVAC SV160B Manuel utilisateur

LEYBOLD

LEYBOLD SOGEVAC SV40 B Manuel utilisateur

LEYBOLD

LEYBOLD SOGEVAC SV120 BI FC Manuel utilisateur

LEYBOLD

LEYBOLD VARODRY VD65 Manuel utilisateur

LEYBOLD

LEYBOLD TRIVAC B D 40 BCS Manuel utilisateur

LEYBOLD

LEYBOLD SOGEVAC SV470 B AIR Manuel utilisateur

LEYBOLD

LEYBOLD TRIVAC S 16 B Manuel utilisateur

LEYBOLD

LEYBOLD TRIVAC B SERIES Manuel utilisateur

LEYBOLD

LEYBOLD TURBOLAB 80 Manuel utilisateur

LEYBOLD

LEYBOLD Turbovac TW 70 H Manuel utilisateur

LEYBOLD

LEYBOLD TRIVAC T Series Manuel utilisateur

LEYBOLD

LEYBOLD TURBOVAC 50 Manuel utilisateur

LEYBOLD

LEYBOLD MAG W 2010 CHT Manuel utilisateur

LEYBOLD

LEYBOLD TRIVAC B SERIES Manuel utilisateur

LEYBOLD

LEYBOLD 666 420 Manuel utilisateur

LEYBOLD

LEYBOLD DRYVAC B Series Manuel utilisateur

LEYBOLD

LEYBOLD ScrewLine SP250 Manuel utilisateur

LEYBOLD

LEYBOLD SOGEVAC SV65 B Manuel utilisateur

LEYBOLD

LEYBOLD RUVAC WS 251 Manuel utilisateur

LEYBOLD

LEYBOLD TRIVAC B Manuel utilisateur

LEYBOLD

LEYBOLD TURBOVAC 151 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur