Leviton 6F101 Manuel utilisateur
Mini MeterTM
Installation Manual
Cat No. 6F101, 6F201, 6S101, 6S201, MK240, MO240
DI-000-A3245-00A
WEB VERSION
WEB VERSION
TABLE OF CONTENTS
1 Warnings and Cautions
2 Product Description
2.1 General Description
2.2 Meter Features
2.3 Meter Certifications
2.4 Physical Description
2.4.1 Single Meter
2.4.2 Enclosures
3 Technical Specifications
3.1 Electrical Specifications
3.2 Input/Output Connections
4 Installation Instructions
4.1 Preparation
4.2 List of Materials
4.3 Mounting the Enclosure
4.3.1 Mounting Location
4.3.2 Drilling Conduit Holes
4.3.3 Mounting Procedure and Conduit Installation
4.4 Installation of Voltage Lines
4.5 Installation of Current Transformers
4.5.1 General Requirements
4.5.2 Installing Solid Core CTS
4.6 Testing the Installation
5 Maintenance
6 Troubleshooting
7 Warranty
8 Contact Information
4
5
5
5
5
5
5
6
6
7
7
10
10
10
10
10
11
12
12
13
13
13
16
16
17
18
19
WEB VERSION
1 WARNINGS AND CAUTIONS
The following section contains installation and wiring instructions for the Leviton Mini Meter™.
If technical assistance is required at any point during the installation, contact information can
be found at the end of this manual. Leviton is not responsible for damage to the meter caused
by incorrect wiring, which will void the product’s warranty.
4
WARNING:
• TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker or fuse
and test that the power is off before installing product or servicing current transformers.
• TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical panel for
possible exposed wire, broken wire, damaged components or loose connections.
• Make sure all tools used during installation have proper installation ratings.
• Installations should be done in accordance with local codes and current National
Electric Code requirements, and performed by trained, qualified professionals.
• Equipment used in a manner not specified by this document impairs the protection
provided by the equipment.
CAUTIONS:
• Verify the model number and electrical specifications of the device being installed to
confirm they are appropriate for the intended electrical service
(see Section 3).
• Consult local codes for any possible permits or inspections required before beginning
electrical work.
• Ensure the conduit for the installation is flexible and non-metallic. For outdoor
applications conduit and conduit fittings must be rated UL Type 4X for outdoor
enclosures. Failure to use the appropriate conduit impairs the degree of equipment
protection.
WEB VERSION
2 PRODUCT DESCRIPTION
2.1 General Description
The Leviton Mini Meter is a self-powered, current transformer (CT) rated electronic
kilowatthour (kWh) meter designed for permanent connection to an electrical service.
Mini Meter devices come in single element (2-wire) and dual element (3-wire)
configurations.
2.2 Meter Features
• Revenue-grade accuracy with solid-core or easy to install split core CTs
• Built in LCD display with optional external mechanical counter
• Encapsulated model for harsh environments
• Multiple load monitoring with a single meter
• AMR compatible isolated pulse outputs
• 5-year warranty
2.3 Meter Certifications
• UL Approved (100A & 200A models only) for use in the US or Canada
• Conforms to accuracy requirements set forth in ANSI C12.1 and C12.16
• Certified to California Division of Measurement Standards
• Approved by the California Energy Commission for use in the California Solar
Initiative’s Performance Based Incentive Program
• Approved by State of Maryland Public Service Commission in accordance with
applicable ANSI C12.1 requirements
2.4 Physical Description
2.4.1 Single Meter
5
L1
X1 X2
CT1 CT2 (Kh) Isol
Isolated Output
X1 X2 10 100 1000
Counter
+12VDC
12COM
L2N
4.620 in.
2.845 in.2.150 in.
3.525 in.
5.130 in.
5.130 in.
1.107 in. 1.282 in.
.125 in.
Figure 1 - Single Mini Meter Case Dimensions
WEB VERSION
2 PRODUCT DESCRIPTION
2.4 Physical Description
2.4.2 Enclosures
6
Figure 2 - Small enclosure and mounting dimensions
Optional mounting position, typical
5.904 in [150 mm]
8.465 in [215 mm]
7.795 in [198 mm]
4.716 in [120 mm] 5.904 in [150 mm]
5.716 in [145 mm]
3.568 in
[91 mm]
WEB VERSION
Input Configurations 1 Phase, 2 wire
1 or 2 Phase, 3 wire
Supply Voltage Range
(L1 or L2 to Neutral)
Min. 102 VAC Max. 138 VAC
Maximum Input Power 8 VA
Maximum Rated Current1220 A primary for 200 A models
110 A primary for 100 A models
0.11 A secondary for 0.1 A secondary models
0.22 A secondary for 0.2 A secondary models
Line Frequency 50-60 Hz
Power Factor Range 0.5 to 1.0, leading or lagging
Accuracy +/- 0.5% of registration @ 1.0pf. 2 to 200 A
+/- 0.75% of registration @ 0.5pf, 2 to 200 A
Operating Temperature Range -30 to +70 degrees C
Rated Pollution Degree22
Rated Relative Humidity 80%
Branch Fuse Holder
Klemsan ASK2 or equiv.
250 V, 1 A, fast acting, short time lag
Terminal Blocks Mini Meter
Dinkle/International Connector
OSTVI110152
4.4 in-lb of torque maximum
3 TECHNICAL SPECIFICATIONS
7
Table 1 - Electrical and Environmental Specifications
1Product approved for use with included Leviton Current Transformers, as follows:
• 200A:
Part Numbers CDA02-x12 (CDA02-K12, CDA02-R12, CDA02-L12, CDA02-212,
CDA02-312) for Solid Core, 0.72" Diameter CTs or CTD02-K16 for Split Core 1" CTs
• 100A:
Part Numbers CDA01-x12 (CDA01-K12, CDA01-R12, CDA01-L12, CDA01-212,
CDA01-312) for Solid Core, 0.72" Diameter CTs or CTD01-K16 for Split Core 1" CTs
2Pollution Degree 2: normally only non-conductive pollution occurs. Occasionally, however, a
temporary conductivity caused by condensation can happen.
3.1 Electrical and Environmental Specifications
The Mini Meter device falls under UL Circuit Category III: devices for measurements
performed in the building installation. The electrical and environmental specifications
for Mini Meter devices are given in the table below.
WEB VERSION
3 TECHNICAL SPECIFICATIONS
3.2 Input/Output Connections and User Display
Voltage Inputs (wire connections) Description
L1 Black wire, voltage input, Line 1,
120 V with respect to neutral
N White wire, Neutral input
L2 Red wire, voltage input, Line 2, 120 V with
respect to neutral (2 phase models only)
CT Inputs
CT1 : X1 Current Transformer input, CT1.
Colored wire of CT 1
CT1 : X2 Current Transformer input, CT1. White wire
of CT1
CT2 : X1 Current Transformer input, CT2.
Colored wire of CT 2.
(2 phase models only)
CT2 : X2 Current Transformer input, CT2. White wire
of CT2 (2 phase models only)
8
L1
X1 X2
CT1 CT2 (Kh) Isol
Isolated Output
X1 X2 10 100 1000
Counter
+12VDC
12COM
L2N
Figure 3 - Mini Meter Connections and Display
Table 2A - Input Connections
LCD
Display
Load
LED
Sealing
Studs
WEB VERSION
3 TECHNICAL SPECIFICATIONS
9
Table 3 - Display Indicators
Table 2B - I/O Connections
3.2 Input/Output Connections and User Display
Outputs Description
10, Isolated Output (10 Wh/P, Kh = 10) Isolated pulse output: 5 watthours
on, 5 watthours off, referenced to
ISOL COM NOT TO BE USED FOR
FIELD WIRING
100, Isolated Output (100 Wh/P, Kh=100) Isolated pulse output: 50 watthours
on, 50 watthours off, referenced to
ISOL COM
1000, Isolated Output (1 kWh/P, Kh=1000) Isolated pulse output: 500 watthours
on, 500 watthours off, referenced to
ISOL COM
ISOL COM Isolated common for 10/100/1000
isolated outputs
Counter (kh = 100 or kh = 1000)* For 12 VDC electro-mechanical
counter
+12 VDC +12 VDC @ 10ma Max output
(MMS and MMD models only) (Not Isolated for pre-wiring only)
* Recommended Leviton Mechanical Counters part numbers are:
MPCTR-1KW (1kWh) and MPCTR-TKW (0.1kWh).
LED Indicators Description
Load LED (green) 50% duty cycle LED to verify proper
meter function when connected to a
load. At 200 watts, LED will flash 1.5
minutes on, 1.5 minutes off; with no
load, LED will remain on or off
LCD Display LCD display that shows total kWh
(also displays kw demand,
instantaneous kw, error codes if
applicable, and more information
upon boot. Refer to the Mini Meter
manual for complete information)
WEB VERSION
4 INSTALLATION INSTRUCTIONS
4.1 Preparation
WARNINGS
•TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER at circuit breaker
or fuse and test that power is off before installing product or servicing current
transformers.
•TO AVOID FIRE, SHOCK OR DEATH; Look inside the meter and electrical
panel for possible exposed wire, broken wire, damaged components or loose
connections.
•Specification for branch circuit protection, rated min. 250 V, 1A, for voltage
sense / input leads.
4.2 List of Materials
• Mini Meter MMU and associated mounting materials.
• Line 1, Line 2, and Neutral hook-up wires as needed for the electrical service.
Wires must be 18 AWG or larger and insulated for 300 VAC min
(NOT INCLUDED).
• Current Transformers (CTs): This product is designed for use with Leviton CTs;
see Section 3.2 for details (NOT INCLUDED IN ALL MODELS).
• Flexible, non-metallic conduit and fittings; UL Type 4X for outdoor applications
(NOT INCLUDED).
4.3 Mounting the Enclosure
4.3.1 Mounting Location
• Meter installations require a switch or circuit breaker as part of the building
installation.
•The switch or circuit breaker must be marked as the disconnecting device for
the MMU.
• It is recommended that the enclosure be mounted near the disconnecting
device in an area with adequate ventilation.
•The enclosure should not be positioned in a manner that makes it difficult to
operate the disconnecting device.
• Ensure that the CT and voltage lead lengths (and conduit lengths) are capable
of reaching the enclosure from the breaker panel.
• If a suitable mounting location near the load center cannot be found, additional
in-line fuses or circuit breaker may be required in accordance with NEC
regulations.
10
WEB VERSION
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Leviton Instrument de mesure
Leviton
Leviton VerifEye 72D48 Manuel utilisateur
Leviton
Leviton 4000-K Series Manuel utilisateur
Leviton
Leviton LP3 MC Series Manuel utilisateur
Leviton
Leviton 4000 Series Manuel utilisateur
Leviton
Leviton VerifEye 7000 Series Manuel utilisateur
Leviton
Leviton Series 1000 Mode d’emploi
Leviton
Leviton VerifEye Series 4100 Manuel utilisateur
Leviton
Leviton Verifeye 8000 Series Manuel utilisateur
Leviton
Leviton 3300 series Manuel utilisateur
Leviton
Leviton LP8 Series Manuel utilisateur
Leviton
Leviton 2R208-21 Manuel utilisateur
Leviton
Leviton 6M Series Caractéristiques techniques
Leviton
Leviton VerifEye Series 4100 Instructions d'utilisation et d'entretien
Leviton
Leviton VerifEye 71D12 Manuel utilisateur
Leviton
Leviton VerifEye 6000 Series Manuel utilisateur
Leviton
Leviton VerifEye 6000 Series Manuel utilisateur
Leviton
Leviton 4OUMR-R12 Manuel utilisateur
Leviton
Leviton Verifeye 8000 Series Manuel utilisateur
Leviton
Leviton VerifEye 3300 Series Manuel utilisateur
Leviton
Leviton Series 2000 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur