LevelOne BOH-1100 Manuel utilisateur
BOH-1100 Box-type Outdoor Housing
Quick Installation Guide
CHECK YOUR PACKAGE CONTENTS
The carton should contain the following items:
BOH-1100
Camera Bracket
Screw Kit
Quick Installation Guide
If any item is found missing or damaged, please contact your local reseller for replacement.
INTRODUCTION
The BOH-1100 is constructed from die casting aluminum with environmental protection to level
IP66. There is a fan and heater included.
Fan would operate once the temp. is over 35℃and would stop once the temperature is under
25℃again.
Heater would operate once the temperature is under 15℃and would stop once the
temperature is over 25℃again.
406mm(L) x 145mm (W) x 109mm (H)
Windows 76mm x 92mm
All tightened by E Screw.
INSTALL HOUSING WITH BRACKET
Lock 4 mounting holes with screws on the bottom side.
INSIDE THE HOUSING
3.
4. 1.
2.
1. Camera mounting platform
2. Cable Conduits
3. Fan
4. Heater
Power Relay Board:
1. Power input DC12V/2.5A or AC24V/2.5A
2. Power output DC12V/2.5A or AC24V/2.5A
3. DC12V power output for camera
4. Power supply to fan
5. Power supply to heater
Note:
AC and DC power can NOT operate simultaneously.
Please note the difference between positive and negative terminals when connecting
power.
Default camera housing package don’t include power adapter
when use the optional power adapter to connect the PCB of the housing , you have to cut adapter’s power
line to plug by manually
2.
1.
4.
3.
5.
Table des matières
Autres manuels LevelOne Accessoires pour appareils photo
LevelOne
LevelOne BOH-1300 Manuel utilisateur
LevelOne
LevelOne DOH-1000 Manuel utilisateur
LevelOne
LevelOne CAS-3000 Manuel utilisateur
LevelOne
LevelOne BOH-1100 Manuel utilisateur
LevelOne
LevelOne BOH-1200 Manuel utilisateur
LevelOne
LevelOne BOH-1300 Manuel utilisateur
LevelOne
LevelOne BOH-1000 Manuel utilisateur
