LESITE LST-UME Manuel utilisateur

Lesite Providing best plastic welding tools

Portable Banner Welder

LST-UME

User’s Guide

Fuzhou Lesite Plastics Welding Technology

Co.,Ltd

Website：www.lesiteweld.com

Email: sales2@lesite.com.cn

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,,Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

Lesite Providing best plastic welding tools

Fuzhou Lesite Plastics Welding Technology Co.,Ltd

Website：www.lesiteweld.com

Email: [email protected]

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,

Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

i. Applications:

It can be applicable for welding PVC-P、PE、TPO、ECB、CSPE、EPDM、PVDF and other

Coated fabric covering, foil and homogeneous or coating sealing film and PE coating fabric.

ii. Notice:

1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component

inside the machine with power

2. Incorrect use of it can cause fire and explosion hazard because of high temperature,

especially near combustible materials and explosive gases.

3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point

hot air flow in the direction of people or animals.

4. The voltage rating stated on the welder must correspond to line/mains voltage (220V or

110V).

The drop cable / wire with protective earthed conductors can only be used.

5. To ensure operator safety and reliable operation of equipment, the power supply must be

installed power supply and leakage protection at the construction site.

6. It must be running at the correct use of manipulation of the operator, or they may cause a

fire or explosion caused by high temperature.

7. Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or

moisture.

iii. Technical Parameters:

Voltage

220 or 110

Frequency

50 / 60

power

3000 or 2600

Temperature

0-620

℃

Welding speed

1-12

m/min

Welding width

30 default (20/40 customized)

Size( L*W*H)

475*290*205

Weight

Please read this manual carefully before using this machine, and retain it for future

reference.

Lesite Providing best plastic welding tools

Fuzhou Lesite Plastics Welding Technology Co.,Ltd

Website：www.lesiteweld.com

Email: [email protected]

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,

Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

iv. Description:

handle

11.

Hot air blower power wire

21.

Drive silica roller

Speed display screen

12.

Positioning screw

22.

Drive roller

Temperature display

screen

13.

Operating handle

23.

Lift lever

Speed setting knob（＋）

14.

Universal wheel

24.

Power cord

Speed setting knob（－）

15.

Guide wheel

25.

Micro switch

Temperature setting knob

（＋）

16.

Micro connect switch

26.

Adjusting screw

Temperature setting knob

（－）

17.

Round belt

27.

Guide pad

ON/ OFF switch

18.

Belt wheel

28.

Hot air nozzle adjusting nut

nnutnutscrew

Moving switch

19.

Hot air nozzle

29.

Driver roller adjusting screw

10.

Hot air blower

20.

Drive silica roller fixed screw

30.

Heating element

Lesite Providing best plastic welding tools

Fuzhou Lesite Plastics Welding Technology Co.,Ltd

Website：www.lesiteweld.com

Email: [email protected]

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,

Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

v. Controller Panel

●ON/OFF switch（8）is used for

open the main power of the welder

●Open ON/OFF switch (8),

LCD display is shown as figure 1,

the hot air blower is under natural

wind without heating.

●Press the button (7) and

(6), the screen shows as Figure 2

and the hot air blower starts to heat until to

the setting temperature.

If press the bottoms (7) and (6) at the same time,

LCD display shows as figure 1, the hot air blower is under natural wind without heating.

●When the welding nozzle is at the right position, press the moving switch (9) and the welder

starts to move and weld. It will stop move if you press the moving switch again.

●When the welder starts to move, the LCD display shows as figure 3.

Fig1

Fig 2

Fig 3

Current temp.

Current speed

Setting speed

Current temp.

Setting temp.

Current temp.

Current speed

Setting speed

Current speed

Lesite Providing best plastic welding tools

Fuzhou Lesite Plastics Welding Technology Co.,Ltd

Website：www.lesiteweld.com

Email: [email protected]

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,

Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

VII. Positioning the welder：

Pressure Lift lever (23) to lift machine, move it to welding position (the edge of upper

membrane should keep in

the same alignment with

Drive silica roller (21) and

the edge of Guide wheel

(15) ), as shown in figure 4.

Fig 4

1. Welding temperature:：

Using bottoms Temperature setting knob+ and Temperature setting knob-

on the panel to set the required temperature. You can set the temperature according to

the welding materials and the ambient temperature. LCD display will show the set

temperature and the current actual temperature.

2. Welding speed:

Using bottoms Speed setting knob+ and Speed setting knob - on the panel

to set the required speed according to the welding temperature. LCD display will show

the set speed and the current actual speed.

3.The machine has a memory function parameters, namely when you use the welder next

time, the welder will automatically use the last set of parameters without having to re-set

parameters.

Upper film

Down film

The edge of upper film

Lesite Providing best plastic welding tools

Fuzhou Lesite Plastics Welding Technology Co.,Ltd

Website：www.lesiteweld.com

Email: [email protected]

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,

Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

Welding process

1. Setting the welding parameters according to the data of welding test.

2. Please wait the actual temperature value reaching the setting value.

3. Positioning the welder

4. Lift the operating handle (13) to lower down the hot air nozzle (19) to close the down

membrane, counterclockwise Operating handle (13) to place hot air nozzle into the

overlap membrane. The machine would start walking and welding automatically.

5. To observe the relative position of Guide wheel（15）.

6. When the welder walks into the end of material, clockwise the operating handle (13) to pull

the hot air nozzle to right side. Then pressure the operating handle (13) to lift the hot air

nozzle.

8. After finish the welding job, press the Temperature setting knob+ and

Temperature setting knob- to make the hot air blower in a cold blowing condition in

order to cool the nozzle.

VIII. Using Condition：

1. The distance between hot air nozzle and ground should be shown as figure 5（We have

adjusted the distance）.

2. The distance between hot air nozzle and Drive roller should be shown as figure 6（We have

adjusted the distance）. You can adjust Hot air nozzle adjusting screw (28) if the distance is

not right.

Figure 5

Figure 6

Lesite Providing best plastic welding tools

Fuzhou Lesite Plastics Welding Technology Co.,Ltd

Website：www.lesiteweld.com

Email: [email protected]

Mob: 86-18650793446

Add:16th building, Juyuanzhou Park,

Jinshan Industry Area, No.618 Jinshan Road

Cangshan Area,

Fuzhou, Fujian, China

Tel:：86-591- 83818890

Fax：86-591-88211499

Hot air nozzle fix screw

Hot air nozzle fix nut

9. Last step is to off the power.

IX. Parts replacement

●Replacement of heating element

Unplug the thermocouple connector (30),

Loosen the four fixing screws of nozzle.

Then you can remove the heating element

after removing the nozzle

As shown on the right:

●Replacement of Drive silica roller

Loosen Drive silica roller fixed screw (20), and then you can take down drive silica roller

（21），As shown on the right:

X. Fault diagnosis and solved ways

The fault performance

Caused reasons

Solved ways

Welder cannot walk

when hot air nozzle at

the right place

Micro switch is not

in right place

Adjust Micro switch（16）to right place

The position between

hot air nozzle and drive

roller is not right

Loosen Hot air nozzle adjusting screw（28）to adjust it

Routine maintenance

Use steel brush to clean the hot air nozzle

Clean the air inlet at the back of the hot air blower

Autres manuels pour LST-UME

Table des matières

Autres manuels LESITE Système de soudage

LESITE

LESITE LST-MAT Manuel utilisateur

LESITE

LESITE LST-UME Manuel utilisateur

LESITE

LESITE LST-WP1 Manuel utilisateur

LESITE

LESITE LST800 Manuel utilisateur

LESITE

LESITE LST1600 Manuel utilisateur

LESITE

LESITE LST610A Manuel utilisateur

LESITE

LESITE LST620C Manuel utilisateur

LESITE

LESITE LST600A Manuel utilisateur

LESITE

LESITE LST-WP4 Manuel utilisateur

LESITE

LESITE LST900 Manuel utilisateur

LESITE

LESITE LST-WP2 Manuel utilisateur

LESITE

LESITE LST-RM1 Manuel utilisateur

LESITE

LESITE LST-TAC Manuel utilisateur

LESITE

LESITE LST-GM1 Manuel utilisateur

LESITE

LESITE LST800 Manuel utilisateur

LESITE

LESITE LST-PAU Manuel utilisateur

LESITE

LESITE LST700 Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur