Lenoxx ES60 Manuel utilisateur
Model: ES60
Batch: PR4159
PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
The illustrations used in this manual are to illustrate the operation method and structure of the product.
Where there is a small difference between the physical item and the illustrations, please take the physical
as the standard.
Safety First!
This section provides safety and warning statements that you should be aware of before you use our
Electric Scooter.
RISK OF DEATH OR SERIOUS INJURY
Whenever you ride the Electric Scooter, you risk death or serious injury from loss of control, collisions,
and falls. To reduce risk of injury, you must read and follow all instructions and warnings in the User
Manual.
Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with
the chin strap in place and provides protection for the back of your head.
Avoid obstacles and slippery surfaces that could result in a loss of balance or traction and cause a fall.
All Electric Scooter parts must be properly installed. Never attempt using your Electric Scooter without all
parts properly installed, this could damage your Electric Scooter and result in serious injury from loss of
control, collisions, and falls.
WARNING!
Do not modify the Electric Scooter. Modifications to the Electric Scooter without the prior written
approval from the manufacturer could interfere with the operation of the Electric Scooter, could result in
serious injury and/or damage, and could void the Lenoxx Electronics Australia Pty Ltd Warranty.
SAFETY AND WARNINGS:
Riding an electric scooter can be a dangerous activity. Certain conditions may cause
components to fail without fault of the manufacturer. The scooter can and is intended to
move and it is therefore possible to lose control, fall off and/or get into dangerous
situations that no amount of care, instruction or expertise can eliminate. If such a thing
does occur you can become seriously injured or die, even when using safety equipment
and other safety precautions.
RIDE AT YOUR OWN RISK AND ALWAYS USE COMMON SENSE.
This manual contains many warnings and cautions concerning the consequences of failing to
inspect, maintain or properly use your electric scooter. Since any incident can result in serious
injury or even death, we do not repeat the warning of possible serious injury or death each time
such a possibility is mentioned in this manual.
APPROPRIATE RIDING ATTIRE
Always wear proper protective equipment such as:
•
Approved safety helmet. (Helmet may be legally required by local law or regulation in your
area.)
•
Elbow pads and knees pads
•
Long sleeved shirt, long pants
•
Gloves
•
Lace up shoes with rubber soles, never ride barefooted or in sandals, and ensure that
shoelaces are tied and kept out of the way of the wheels and drive system.
RIDER USE AND PARENTAL SUPERVISION
RIDER MUST NOT EXCEED THE WEIGHT LIMIT OF 120 KG.
Rider weight does not always mean a person's size is appropriate to fit or maintain control of
the scooter.
This manual contains extremely important safety information. It is your responsibility to
completely review this information and make sure that all riders understand all warnings,
cautions, instructions and safety topics and assure that all riders can safely and responsibly use
this scooter. We advise that you periodically review and reinforce all information in this manual
with all riders and that you inspect and maintain your scooter to ensure their safety.
The recommended rider age is 16 years and older. Any rider that is unable to fit comfortably on
the scooter should never attempt to ride it. A parent's decision to allow their child to use
scooter should be based on the child's maturity, skill and their ability to follow rules.
Do not touch the motor or brakes on the scooter when in use or directly after use as these parts
can become extremely hot.
Keep this scooter away from small children and remember that it is intended for use only by
persons who are, at a minimum, completely competent and comfortable while operating this
product.
RIDING PRACTICES AND CONDITIONS
Check and obey any local laws or regulations which may affect the locations where the electric
scooter may be used.
Always ride defensively. Watch out for obstacles that could catch your wheel or force you to
tum suddenly or lose control. Be careful to avoid pedestrians, other wheeled products (such as
skaters, skateboards, scooters, bikes, etc.), children or animals who may enter your path.
Always respect the rights and property of others.
Do not activate the speed control on the hand grip unless you are on the scooter and in a safe,
outdoor environment that is suitable for riding.
Do not attempt or perform stunts or tricks on this electric scooter. This product is not made to
withstand abuse from jumping, curb grinding or any other type of misuse or stunts.
Always maintain a hold with both hands on the handlebars.
Never allow more than one person at a time to ride the scooter.
Never use near steps, water, or swimming pools.
Never ride while using a mobile phone or while wearing headphones.
Keep your fingers and other body parts away from the belt, motor, steering system, wheels and all other
moving components. Never ride while using a cell phone or wearing headphones.
Never hitch on to or with another vehicle or pull anyone or anything.
Never immerse the scooter in water; electrical and drive components could be damaged by water or
create other possible unsafe conditions.
Ride only on flat, dry surfaces such as pavement or level ground without loose debris, such as sand,
leaves, rocks or gravel. Water, mud, ice, bumpy, uneven, slick, or rough surfaces could impair traction and
contribute to possible loss of control. Avoid excessive speeds that can occur from downhill rides which
could cause loss of control.
Do not ride at night or in areas of limited visibility.
Do not ride in wet weather.
Do not ride near anything flammable or explosive.
NEVER use on public roads, hills, sloped driveways or near motor vehicles or swimming pools.
Do not ride indoors or on surfaces that could become damaged such as carpet or flooring.
Before each ride the following checks will need to be performed to the scooter:
•
Ensure that the brake system is functioning properly.
•
That all components are properly secured and are functioning according to manufactures specifications.
Components shall be maintained and repaired in accordance with the manufacturers authorized
replacement parts with installation performed by a qualified repair agent.
FAILURE TO HEED TO THE WARNINGS LISTED ABOVE INCREASES RISK OF POTENTIAL SERIOUS INJURY.
USE THE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR PROTECTIVE GEAR.
GENERAL SAFETY INFORMATION:
1. Do not submerge the scooter or it’s charger in water or any other liquid.
2. Do not charge the scooter with a broken or damaged charger. Please call 1300 666 848 to order a
replacement charger.
3. Any repairs to the scooter must be carried out by an authorised or qualified service centre/repairer.
4. The assembly of the scooter must be completed by an adult.
5. To avoid suffocation, keep all bags and small parts away from babies and children.
6. This scooter is not designed to be used by people (including children) with a physical, sensory or
mental impairment, or people without knowledge or experience, unless they are supervised or given
prior instructions concerning the use of the scooter by someone responsible for their safety. Children
must be supervised to ensure that they do not play with the scooter.
BATTERY AND CHARGER:
Charge the battery fully before use.
The battery can be charged at any time to ensure that the battery has power.
Charge the battery once every three months to maintain its lifespan and charge level.
The lithium battery can be recharged at least 500 times.
USING THE CHARGER
The charger has a charging protection function; when the battery is 100% charged, the charger will
automatically stop charging.
The first initial charge is 6 hours.
Each subsequent charge time is no more than 5 hours.
To charge the scooter, open the rubber charging hole protective cover.
Connect the charge connection into the charging hole.
Connect the chargers plug into a power point.
When the charger light is red the battery is charging.
When the charger light is green, the battery is fully charged.
The charger should be regularly examined for damage to the cord, plug, enclosure and other parts. In the
event of such damage, if any is found, the scooter should not be charged until the charger has been
repaired or replaced.
Use only with the supplied recommended charger. Always use caution when charging.
The charger is not a toy and should be operated by an adult. Never operate charger near flammable
materials or liquids. Disconnect the charger and unplug from scooter when not in use. Do not exceed
recommended charging time.
Always disconnect the charger from the scooter prior to wiping down cleaning.
APP DOWNLOAD AND FUNCTIONS:
1. Search for the app aovopro in the APP store or google play.
Download and install onto your smart device.
2. Ensure Bluetooth is turned on, on your smart device.
3. When the app is installed, press the on/off button for 1 second to turn on scooter.
4. Open the aovopro app.
The scooter is automatically connected the app, then you can use the app to switch the light on
or off, change speed, set up cruise control or lock scooter.
5. If you do not want to use the app, you can also use controls on the scooter to operate the
scooter.
SCOOTER CONNECTED:
Real time speed
Lock/unlock button Light on/off
Bluetooth connection indicator Settings
Speed level button Cruise control on/off
Scooter details
Real time speed shows the current travel speed of the scooter
Connected: Press to connect/ disconnect the scooter with Bluetooth settings on your smart device
Lock/Unlock: Press to lock the scooter so it cannot be used, press it again to unlock the scooter so it can
be used.
Light on/off: Press to turn the LED headlight on the scooter on or off.
Settings: Press to access the settings page where a range of
settings can be adjusted. Press the arrow in the top left corner to
exit out of the settings page and to use the scooter.
Riding mode:
Switch between 3 x convenient pre-set speed levels,
Eco: 15 km/h
Slow: 20 km/h
Sport: 25 km/h
Boot mode:
Change between kick start or taxi mode.
Kick start: Use your foot to start gliding with the scooter, then
adjust the speed using the speed lever.
If the speed lever is pressed while it is in kick start mode, the
scooter will not ride.
Taxi mode: Use the speed lever to start the scooters ride.
Advanced settings page:
Accelerated response:
Adjust the sensitivity of the accelerator from level 1 up to level 10.
Brake response:
Adjust the sensitivity of the brake response from level 1 up to level
10.
Speed limit value:
The speed limit for the scooter can be set on the app for increased
safety.
The speed limit can be set between 15 km/h - 30 km/h.
The default speed is 25 km/h.
Speed mode button (on the main app page):
Switch between 3 x convenient pre-set speed levels,
Eco: 15 km/h
Slow: 20 km/h
Sport: 25 km/h
Details page: Press to access the details page to read more
information about the scooter
Cruise control on/off: Press to turn the cruise control on or off
PRODUCT STRUCTURE:
Accessories:
Tire wrench 2 x screws 1 x hex wrench charger
ASSEMBLY:
1. Connect the electric clips and fix the steering rod.
2. Set the handle bars vertical.
3. Open and lock the folding mechanism in place.
4. Using the included hex wrench and screws found in the accessories bag, tighten the screws on the
handle bar. Remember to check and retighten every now and then.
5. Test turning the electric scooter on/off by holding down the power button for 3 seconds after
assembly is complete.
Table des matières
Autres manuels Lenoxx Scooter
Manuels Scooter populaires d'autres marques
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Manuel utilisateur
Carrera
Carrera impel Manuel utilisateur
Afikim
Afikim Superlight SL-3 Manuel utilisateur
CareCo
CareCo ZOOM Manuel utilisateur
Douglas
Douglas Vespa G.S. Manuel utilisateur
Gazelle
Gazelle with BOSCH System Manuel utilisateur