Lenovo Mirage Camera with Daydream Manuel utilisateur
Lenovo Mirage Camera with Daydream
User Guide
Basics
All pictures and illustrations in this document are for reference only.
The VR180 app supports both Android and iOS systems. This document uses the
Android system as an illustrative example.
Before using this information and the product it supports, be sure to read the following:
Quick Start Guide and Safety & Warranty
Regulatory Notice
Important safety and handling information Appendix
This device contains labels to indicate physical tampering or liquid damage. If evidence of tampering
or liquid damage is found during service, this will void the terms of the product warranty.
The Safety, Warranty & Product Guide and the Regulatory Notice are available at
http://support.lenovo.com/jedichallenges.
Getting started
Overview
Lenses
Dual microphones
Input/output door
VR photos
VR videos
VR live streaming
Battery cover
microSD card slot
USB-C 2.0 port
Wi-Fi indicator
Function button
Power button
Shutter button
Status indicator
Speaker
Accessory socket
Wrist strap holes
Downloading the VR180 app by Google
1. Open the Google Play Store orApp Store in your mobile device.
2. Search for .
3. Download the VR180 app by Google.
Search for the VR180 by Google
Turning on/off
Turn on
Tap the power button. The status indictor blinks in green, then glows in blue a few seconds later.
Turn off
Press and hold the power button until the indicator turns off.
In the standby mode, the camera will automatically shut down if there is no operation within 2
hours.
Sleep/wake up
Sleep: The camera will automatically enter Sleep mode if there is no operation within 5 minutes
when it does not connect with the VR180 app. At this time, the camera cannot take photos or
record videos..
Wake up: tap the Power button to wake up the camera.
Status indicator
Camera state
Battery percent
Indicator
Standby
Battery percent > 20%
Blue
Battery percent ≤ 20%
Red
The camera is pairing
/
Flashes blue and green
The camera is powering on
/updating firmware
/
Flashes green
The camera is recording video
Battery percent > 20%
Flashes blue
Battery percent ≤ 20%
Flashes red
The camera is charging and
recording video
Battery percent = 100%
Flashes blue
Battery percent < 100%
Flashes orange
The camera is charging
Battery percent = 100%
Blue
Battery percent < 100%
Orange
Camera failure
/
Quickly flashes red 3 times
Please do not perform any operation while updating the firmware to prevent damage to the
device.
Connecting the camera to a mobile device using the VR180 app
1. Open the VR180 app.
2. Turn on your mobile device’s Bluetooth.
3. Follow the onscreen steps in the app to pair your camera and mobile device to finish.
Connecting the camera to the Internet
You’ll need to regularly connect your camera to the Internet using the VR180 app to get the latest
camera software updates.
1. Open the VR180 app.
2. Ensure your camera is paired with Bluetooth.
3. Follow the prompts to connect your camera to Wi-Fi.
Using the camera
Taking photos/recording videos
The camera can take photos/record videos without connecting to another device.
1、Turn on the camera.
2、Tap the Function button to choose shooting mode.
3、Focus the lens on the object to be shot.
4、Tap the shutter button to take photos or record videos.
The camera's shooting coverage is larger than the visual range of human eyes.
Please do not extend your fingers beyond the edge of the camera when shooting.
Shooting coverage
The camera's shooting coverage is 180°in both the horizontal and vertical directions.
Shooting distance
When shooting, keep the camera and the object to be shot the correct distance from each other to get
the best 3D effect. The best recommended distance is x m - x m.
The 3D effect will decrease as the shooting distance increases.
When the shooting distance is too short, viewing photos / videos will produce discomfort.
Use VR180 app
Use main interface
❶
Displays the battery charge percentage.
❷
The used storage space can be viewed.
❸
Tap to perform the following operations:
Choose to delete the photos/videos
saved in the mobile device.
Other settings.
❹
Tap VIEW ALL to view all of the photos or
videos.
❺
The photos / videos downloaded to the
mobile device can be viewed.
❻
Tap to enter the shooting interface.
Shooting interface
❶
Tap to exit the Shooting interface.
❷
Tap to switch the video
resolution.
❸
Tap to manually adjust the
exposure value.
❹
Tap to choose the shooting
mode.
❺
Preview interface.
❻
Tap VIDEO to switch to video mode.
❼
Tap PHOTO to switch to photo mode.
❽
Tap LIVE to switch to live mode.
❾
Shooting button.
Connect the VR180 app to take photos
1. Start the VR180 app, tap > PHOTO.
2. Focus the lens on the object to be shot.
3. Tap .
Connect the VR180 app to record videos
1. Choose video mode:
Tap the Mode switch button to choose video mode.
Start the VR180 app, tap > VIDEO.
2. Focus the lens on the object to be recorded.
3. Tap .
When the battery charge percentage is < 10%, the camera will stop recording videos.
Please do not turn the camera off or remove the microSD card immediately after finishing
recording.
Live
Before using the live function, please log in your Google account and complete the settings according
to the interface prompts.
1. Start the VR180 app, tap > LIVE.
2. Focus the lens on the object to be live broadcast.
3. Tap .
Viewing 2D photos / videos
1. Start the VR180 app
2. Tap VIEW ALL.
3. Choose the photos / videos to be viewed.
Downloading photos / videos to a mobile device
1. Start the VR180 app
2. Tap VIEW ALL.
3. You can download photos / videos in the following ways.
Tap on the photos / videos to be downloaded, tap .
Tap > Select…, choose the photos / videos to be downloaded, tap .
Sharing photos / videos
1. Start the VR180 app.
2. Tap on the photos / videos to be shared.
3. Tap , complete the sharing by following the screen prompts.
Only the photos / videos saved in the mobile device can be shared.
Deleting photos / videos
1. Start the VR180 app
2. Tap VIEW ALL.
3. You can delete photos / videos in the following ways.
Tap the thumbnails of the photos / videos to be deleted, then tap Delete.
Press and hold the thumbnails of the photos / videos to be deleted, then tap .
Connecting the camera to a computer
Connect the camera to a computer with a USB cable. You can the transfer files between the camera
and the computer.
Viewing 3D photos / videos using a VR device
You can view 3D photos / videos using a VR device (such as a Mirage Solo with Daydream).
View using a Mirage Solo with Daydream
Save the photos / videos in the microSD card, then insert the micro SD card into the VR device.
View by other VR devices
Upload the photos / videos to social media, then open them in the VR device to view them.
Copy the photos / videos to Google Photo, then open them in the VR device to view them.
Please refer to the user manual for the VR device for detailed operating steps.
Please visit xxxxxxxx to see the supported VR devices.
Settings
Managing your camera
1. Tap the VR180 app.
Table des matières
Autres manuels Lenovo Appareil photo numérique
