LENCO BTT-6 Manuel utilisateur

BTT-6

3D SOUND SPEAKERTOWER WITH

BLUETOOTH®

User manual

www.lenco.eu

V1.0

Table of contents

What’s in the box?......................................................................................................3

3D Sound...................................................................................................................4

Exploring the device...................................................................................................4

Top view.............................................................................................................................................4

Front view ..........................................................................................................................................5

Rear view............................................................................................................................................5

Exploring the remote control.......................................................................................6

Getting started............................................................................................................7

Where to install..................................................................................................................................7

Connecting the power cord................................................................................................................7

Installing the batteries in the remote control ....................................................................................7

Battery maintenance..........................................................................................................................7

Installing the backup memory battery ...............................................................................................7

Establishing a Bluetooth® connection ................................................................................................8

Basic operation ..........................................................................................................8

Bluetooth® .........................................................................................................................................9

FM Radio ............................................................................................................................................9

AUX ....................................................................................................................................................9

Sleep timer .........................................................................................................................................9

Reset ................................................................................................................................................10

System settings........................................................................................................10

Setting the display backlight level ....................................................................................................10

Setting the clock ...............................................................................................................................10

Trouble shooting....................................................................................................10

Safety instructions....................................................................................................11

Declaration of Conformity.........................................................................................12

Do not distribute copyright-protected material ..........................................................13

Disclaimer ................................................................................................................13

Service and support .................................................................................................14

End of life.................................................................................................................15

Dear customer,

Thank you for buying this Lenco product. Quality and usability is our top priority. In order to

let you fully enjoy this tablet, we have manufactured this product using high quality

standards, materials, components, and care.

Please read all safety instructions and national restrictions, before you use this

product.

Note:

This user manual was printed prior to the development of this product. When operability or

other functions needed improvement, priority went to the product specification itself, and not

to this manual.

In such instances, the functions in the instruction manual may not entirely match all the

functions of the actual product. Therefore, the actual product and packaging, as well as the

name and illustration, may differ from the manual. The images shown as an example in this

manual may differ from the actual screen display.

Lenco is not liable for any consequential damage.

What’s in the box?

This tablet has been assembled with the utmost care. If, however, an accessory is missing,

please contact your local dealer immediately.

These accessories are included with the product:

3D Sound This is a model that features integrated Sonic Emotion

3D Sound, a technology that uses Wave Field

Synthesis to create the illusion that sound comes from

all around the room. Every type of input, even stereo,

iPhone, iPad, iPod, Touch / smartphone Bluetooth music streaming, stereo FM-radio or Aux-

in music that is being played in stereo can be used to create a virtual soundfield using WFS

by Sonic Emotion. This enabled you to enjoy the finest audio, no matter where you are in the

room. All with a single device.

Exploring the device

Top view

1. CH+ / CH- buttons, press the CH+ button to go to the next preset radio station.

Press the CH- button to go to the previous preset radio station ¹.

2. ST. / MONO button, press this button to switch between stereo and mono

reception ¹.

3. AUX button, press this button to enter the AUX mode.

4. Volume + / - button, press the volume + button to increase the volume. Press

the volume –button to decrease the volume.

5. Standby button, press this button to turn the device on or off.

6. Bluetooth® LED, this LED shows the Bluetooth® status. When the LED

indicator is blinking, the tower is paired with a Bluetooth® device.

7. Mode / MEM knop, use this button to set the clock’s 12 / 24 hour display or to

save preset radio stations.

8. RADIO knop, press this button to enter the FM radio mode.

9. Fine tuning + / - / / buttons

in Bluetooth® mode: Press the button to go to the next song. Press the

button to go to the previous song.

in radio mode: Press the + button to raise the frequency. Press the –button to

lower the frequency.

10. Sleep button, press this button to set the sleep timer.

11.BT button, press this button to enter the Bluetooth® mode.

12. play / pause button, press this button to start the audio playback. If a file is

being played, press this button to pause playback ².

13.DIMMER button, press this button to set the display backlight level.

¹ This feature is only available in the radio mode.

²This feature is only available in the Bluetooth® mode.

12 13

Front view

14.Speakers.

15.Subwoofer.

16.Infrared eye, the infrared eye receives the remote control’s signals.

17.AUX LED, this LED will be lit when the device in in the AUX mode.

18.Bluetooth® LED, this LED will be lit when the device is in the Bluetooth® mode.

19.FM LED, this LED will be lit when the device is in the radio mode.

20.FM Band decimal LED.

21.LED Display, this display shows the most important information.

22.PM LED indicator, when the 12 hour time setting is active, this LED will be lit in

the afternoon.

Rear view

23.Battery compartment for the clock’s back-up memory.

24.Reset button, when the device stops responding, press this button to reset the

device ¹.

25.AUX input jack, use this input to connect an external audio source.

26.USB port, use this port to connect a USB device ².

27.DC input jack, use this input to connect the power cord.

28.Bass reflex opening, this hole is used for the air movement of the bass speaker.

29.Wire antenna, this antenna receives FM radio signals.

¹ All settings will be lost.

² USB specifications: DC 5V 500mA

23242526

22 21 20 18 16

19 17

Exploring the remote control

1. Infrared LED, this LED sends infrared signals to the main unit.

2. Standby button, press this button to turn the device on or off.

3. BT button, press this button to enter the Bluetooth® mode.

4. AUX button, press this button to enter the AUX mode.

5. MEM button, use this button to save radio stations.

6. Volume + / - buttons, press the volume + button to increase the volume. Press

the volume –button to decrease the volume.

7. Mute button, press this button to turn off the volume, press it again to turn the

volume back on.

8. Mode button, use this button to set the clock’s 12 / 24 hour display.

9. Sleep button, press this button to set the sleep timer.

10.RADIO button, press this button to enter the FM radio mode.

11. play / pause button, press this button to start the audio playback. If a file is

being played, press this button to pause playback ².

12.ST. / MONO button, press this button to switch between stereo and mono

reception ¹.

13.CH+ / CH- buttons, press the CH+ button to go to the next preset radio station.

Press the CH- button to go to the previous preset radio station ¹.

14.Fine tuning + / - / / buttons

in Bluetooth® mode: Press the button to go to the next song. Press the

button to go to the previous song.

in radio mode: Press the + button to raise the frequency. Press the –button to

lower the frequency.

15.DIMMER button, press this button to set the display backlight level.

16.Battery compartment, open this compartment to install or replace the battery.

¹ This feature is only available in the radio mode.

² This feature is only available in the Bluetooth® mode.

Getting started

Where to install

Never place the tower in direct sunlight. For comfortable viewing, we recommend a soft light.

Place it on a sturdy platform of which the surface should be flat and steady, so the product

can’t fall or hit by any objects. Make sure the product is placed in such a manner that nothing

can fall on top of it, as pressure will damage or break the product. Prevent insertion of

objects into the ventilation slots, or openings in the cabinet at all time.

Connecting the power cord

Connect the power cord to the tower by connecting the small flat end of the cable to the

power connection on the rear of the tower. Connect the wide flat end of the cable to the

power outlet.

The power outlet must be easily accessible, so that the power cord can be easily

disconnected from the outlet when there is a problem with the device.

Installing the batteries in the remote control

1. Press the locking tab in the direction of the arrow.

2. Pull out the battery tray in the direction of the arrow.

3. Place the battery in the tray with the + side facing up.

4. Push the tray back into the remote until it clicks.

Important note: Only use a battery of type CR2025.

Battery maintenance

To maximize the battery and remote control lifetime, please follow these instructions:

Use the remote control of the product at least once a week.

Remove the battery from the remote control if it is not used longer than a week.

Always keep the tablet away from heat sources.

Lenco recommends the use of A-brand batteries.

Installing the backup memory battery

Open the battery compartment by pressing the cover in the direction of

the arrow.

Place the CR2032 battery and close the cover. Please note that the

battery should be placed in the same way as the original battery.

Establishing a Bluetooth® connection

Bluetooth® LED indicator information:

The Bluetooth® LED will burn continuously if the device is searching for a Bluetooth® device.

The Bluetooth® LED will blink if it is paired with a Bluetooth® device.

The Bluetooth® information of this product is:

Name: Lenco

Password / PIN: 0000

Before you start the configuration of the Bluetooth® connection, make sure that the

Bluetooth® module on your smartphone or tablet is turned on.

Important note: Some Bluetooth® devices might not be compatible with this device.

Turn on the tower by pressing the standby button on the remote control or tower.

Go to Bluetooth® mode by pressing the BT button.

Wait until the Bluetooth® indicator LED burns continuously.

Search for Lenco on your smartphone or tablet and connect with it.

If the pairing is successful the Bluetooth® indicator LED starts blinking.

Auto-pairing: When the Bluetooth® connection is lost, you can turn the device off and on to

reconnect with the last paired smartphone or tablet. You can also switch to AUX mode by

pressing the AUX button on the remote control or tower and then switch back to Bluetooth®

mode by pressing the BT button on the remote control or tower.

Manual pairing: If you would like to pair/connect to another smartphone or tablet, press the

BT button to enter Bluetooth® mode. In the first 30 seconds the device will search for the last

paired Bluetooth® device. After these 30 seconds you can follow steps 4 and 5 to pair

another smartphone or tablet.

Note: If the tower cannot find any Bluetooth®device for an hour, the tower will automatically shut

down.

Basic operation

Use the standby button on the tower or remote control to turn the unit on and

off.

Volume + / - buttons on the tower or remote control. Press + to increase the

volume, press - to decrease the volume.

Mute button on the tower or remote control. Press this button to turn off the

volume. Press it again to turn on the volume.

Bluetooth®

All of the functions below only work when in Bluetooth® mode with another device paired to the tower.

Music playback

Press the play button on the tower or remote control to start music playback.

button, press this button on the tower or remote control to go to the next

song.

button, press this button on the tower or remote control to go to the previous

song.

Volume + / - buttons, press the volume + button on the tower or remote control

to increase the volume. Press the volume –button on the tower or remote control

to decrease the volume.

Mute button on the tower or remote control. Press this button to turn off the

volume. Press it again to turn on the volume.

FM Radio

When the device is enabled, press the radio button on the tower or remote control to enter

the radio mode.

Finding channels:

Hold the tuning + / - buttons or the / buttons until the frequency on the display starts

changing. The tower will now search for the nearest channel with a good reception. Once the

channel is found, the tower will stop at this frequency.

To manually search, briefly press the tuning + / - buttons or the / buttons. Each press

will change the frequency by 0.05mHz.

Saving channels:

Tune to the frequency that you want to save.

Press the MEM button on the remote control, the preset station number will start blinking on

the display.

Use the CH + / - buttons to select the desired station number, once the desired channel has

been reached, press the MEM button to save the channel.

Recalling preset stations:

Press the CH + / - buttons to browse through the preset stations. The number of the preset

station will be displayed on the display briefly.

AUX

Use the AUX connection to connect external audio sources that don’t support Bluetooth® to

the tower. Press AUX on the tower or on the remote control to enter the AUX mode. When

AUX mode is active you can only control the volume with the Lenco device. All other

functions need to be operated from the external device.

Sleep timer

This feature will turn off the device after a preset time (of up to 90 minutes). To activate the

sleep timer mode repeatedly press the button on the remote control until the desired sleep

time is reached. The sleep time can be set to 15, 30, 45, 60 and 90 minutes. Take note that

the sleep timer doesn't turn off the external audio device.

Reset

If the device does not respond to the controls anymore, you can press the reset button with a

think object such as an paperclip. When the device is reset, the system memory is cleared

and all settings will be erased.

System settings

Setting the display backlight level

Press the dimmer button on the remote control to adjust the backlight intensity. The

intensity can be set to low or high.

Setting the clock

1. Press the mode button on the remote control to select the desired clock format.

2. Press the / buttons to select the 12 or 24 hour clock.

3. Press mode to set the hours and minutes.

4. Press the / buttons to set the hours.

5. Use the volume + / - buttons to set the minutes.

6. Press mode and wait for a couple of seconds to save the settings.

Trouble shooting

Problem

Solution

The device does not turn on

Check if the adaptor is connected correctly.

No sound

Did u select the right source? (Bluetooth®, FM or

AUX)

Has the external audio source been setup

correctly?

Has the Bluetooth® device been paired?

Press mute.

Press volume +.

The remote control does not function

Are you within operating range?

In strong light (outdoor) the remote control may

not work properly.

Replace the battery.

The device does not respond

Reset the unit.

Table des matières

Autres manuels LENCO Intervenants

LENCO

LENCO BT-120 Manuel utilisateur

LENCO

LENCO PA-46 Manuel utilisateur

LENCO

LENCO BT-191BU Manuel utilisateur

LENCO

LENCO BT-125 Manuel utilisateur

LENCO

LENCO PLAYLINK 6 Manuel utilisateur

LENCO

LENCO BTT-2 Manuel utilisateur

LENCO

LENCO SB-100 Manuel utilisateur

LENCO

LENCO BT-160 Manuel utilisateur

LENCO

LENCO BT-191 Manuel utilisateur

LENCO

LENCO BTP-200 Manuel utilisateur

LENCO

LENCO PA-220BK Manuel utilisateur

LENCO

LENCO PA-80 Manuel utilisateur

LENCO

LENCO IPT-100 Manuel utilisateur

LENCO

LENCO BT-125 Manuel utilisateur

LENCO

LENCO BTS-110 Manuel utilisateur

LENCO

LENCO BTP-400 Manuel utilisateur

LENCO

LENCO IPT-6 Manuel utilisateur

LENCO

LENCO BTL-450 Manuel utilisateur

LENCO

LENCO SB-210 BT Manuel utilisateur

LENCO

LENCO BTP-400 Manuel utilisateur

LENCO

LENCO PA-80 Manuel utilisateur

LENCO

LENCO SPB-260 Manuel utilisateur

LENCO

LENCO PA-260BK Manuel utilisateur

LENCO

LENCO PMX-240 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur