LENCO Xemio-767 BT Manuel utilisateur

USER’S MANUAL

Xemio-767 BT

MP3 / MP4 player wit Bluetoot

For more information: www.lenco.com

Cautions

•Do not place naked flames, such as lighted candles on or near the

product.

•Do not place objects filled with liquids, such as vases on or near the

product.

•Do not use or store this product in a place where it is subject to direct

sunlight, heat, excessive dust or vibration.

•Do not use this product with wet hands.

•Do not clean this product with water or other liquids.

•Do not block or cover the slots and holes in the product.

•Do not push foreign objects into the slots or holes in the product.

•Do not attempt to open this product yourself. here are no user

serviceable parts inside.

•Do not allow children access to plastic bags.

Safety Warnings

•Before using this product, read and follow all warnings and instructions.

•his product is not intended for use by young children. Young children

should be properly supervised.

•his product is intended for household use only and not for commercial

or industrial use.

•Do not expose to dripping or splashing.

•No naked flame sources, such as lighted candles, should be placed on the

product.

•Ventilation should not be impeded by covering ventilation openings with

items such as newspapers, table cloths, curtains and the like.

•Make sure the unit is adjusted to a stable position. Damage caused by

using this product in an unstable position or by failure to follow any

other warning or precaution contained within this user manual will not

be covered by warranty.

We, suggest retaining the packaging in case for future transport of the

product.

If at any time in the future you should need to dispose of this product

please note that: All batteries and accumulators need to be removed from

this product (Removal of Waste Batteries and Accumulators).

WARNING:

When participating in the traffic listening to a

personal music player can make the listener less aware of

potential dangers such as approaching cars.

WARNING:

o prevent possible hearing damage, do not listen

at high volume levels for long periods.

1. Get to know t e controls on Player

Item

Description

F LCD Display

Button (

On / Off,

Play / Pause)

Button (Previous / Fast

Rewind)

Button

(Next / Fast

Forward)

Button (Menu)

Button (Previous Menu / Exit)

Micro

USB

Port

(PC Connection / Charge)

Mic

rophone Position

(

ono

, inside USB port

)

Micro SD Memory Card Slot

Earphone Output Jack (3.5mm Stereo)

Button (Volume

Down

)

Button (Volume

)

2. About Player Battery

Player has an internal, non–user-replaceable battery. For best results,

the first time you use player, let it charge for about 3 ~ 4 hours or until the

battery status icon in the “Connect” screen shows that the battery is in full.

Battery is full

Note: Player may continue use battery power after it’s been turned off. For

maintain the battery life and performance, if unit isn’t used for a while, the

battery need to be recharged, recharging the battery at least once per

month.

a. C arging t e Battery:

You can charge the player battery in two ways:

Connect player to your computer. Or,

Use the USB power charger. (not included)

b. Connection and C arging:

Once you have connected player with computer / power charger, then

you will see the “C oose connection” screen appear to choose and it will

switch to Charge & ransfer” mode automatically if no action in 4 ~ 5

seconds.

Choose “C arge & Transfer” to upload or download the media files with

your computer and charging the Player’s battery.

Choose “C arge & Play” to operates the Player’s function and the battery

charging in background.

he level bars are running in battery icon at the “Connect” screen. he

battery is in charging.

“C oose connect type” “C arge & Transfer” “C arge & Play”

In C arging

Important: The battery does not charge when your computer is in sleep. The

US port on most keyboards does not provide enough power to charge the

player. Connect player to a US 2.0 port on your computer only to prevent

charge problem.

3. Connecting and Disconnecting Player

a. To Connecting Player:

o connect player to your computer, plug the connector of USB Cable into

a USB port on your computer, and connect the other end to player,

hen the player is ready for media files transfer with your computer and

the battery is charging when “C arge & Transfer” mode is selected. And

the “Connect” screen is appearing for view.

Now you can transfer the media files by using the computer mouse use

drag and place, or copy and paste, in between the player and your

computer.

b. To Disconnecting Player:

It’s important not to disconnect player while it’s syncing or transferring

files. Eject the player before disconnect it.

o eject player, press once M button, the “Connect” screen will switch to

“Main Menu” screen. And now is safe to disconnect the player with your

computer. Unplug the USB cable from the player. Or,

If you’re using a Windows PC, you can also eject player in My Computer

or by clicking the “Safely Remove Hardware” icon in the Windows

system tray, select the correspondence name of USB Device and choose

“Stop” > choose “Confirm” > choose “Confirm” follow by the pop-up

windows you’re your computer.

If you’re using a Mac, you can also eject player by dragging the player

icon on the desktop to the rash.

Disconnect the USB cable from the player and computer, simply remove

it.

If you accidentally disconnect player without ejecting it, reconnect it to

your computer and sync again. However, some media file may loss.

4. Getting Start t e Player

Turn ON / OFF t e player and use of Main Menu:

o turn ON the player, press and hold the button for 3 seconds, then

you will see any one of the following shown Main Menu screen,

“Bluetoot / Music / Movie / Record / Picture / Setup / eBook”, will

appear on LCD after the Loading and Opening screen have displayed.

o turn OFF the player, press and hold the button for 3 seconds.

“Main Menu” screens

5. Use Setup Menu

You might need to set date & time or change some default setting as you

desired in setup menu before you start to use the player.

o go into setup menu, from main menu, choose “Setup” by using /

and buttons, a “Setup” menu appears to use;

For back to previous menu or main menu, press or pressing button

during in setup menu and submenu.

“Setup” Menu

a. Sleep timer:

In Setup menu, choose “Sleep timer”, by using / and buttons

then choose “Off” to switch off it. ( factory default is “Off”)

In Setup menu, choose “Set sleep timer” to switch On the sleep timer, a

levels bar with number appear to use, then choose “1 ~ 99” (Minutes) as

you want by using / buttons and buttons.

he Player will turn off itself automatically as your desired time set.

b. Display settings:

You can set the backlight to illuminate the screen for a certain amount of

time as you desired, or make the backlight to “always On” when every time

you turn ON the player.

In Setup menu, choose “Display settings” > choose “Backlig t timer”, a

list appear to use, then chose “Always On / 10 / 20 / 30 seconds” as you

desired by using / buttons and buttons. Choose “Always On”

to prevent the LCD backlight from turning to off. (choosing this option

decrease battery performance)

Choose “Screen saver” > choose “Digital clock” or “Screen off” to turn

On and Off the screen saver function. Chosen digital clock to display the

date and time when the screen saver if in On.

c. Date & Time:

In Setup menu, choose “Date and time” by using / button and

button, a list appears to use.

Set Time

Choose “Time settings” to set clock, then choose “Set time format” or

“Set time” as you want;

Choose “Set time format” then choose “12 Hours / 24 Hours” show

format as you desired.

Choose “ Set time”, a clock interface will appear to set;

he “Hour / Minute” set item is highlighted, press M button to switch in

between Hour and ime which you want to set. And adjusting hour and

minute to current time by pressing the / button.

Finally, you need to press the button to confirm the adjustment and

the screen will back to previous menu.

Set Date

Choose “Date settings” to date, then choose “Set date format” or “Set

date” as you want;

Choose “Set date format” then choose “MM DD YYYY / YYYY MM DD”

which format as you desired.

Choose “ Set date”, a date interface will appear to set;

he “MM / DD / YY” set item is highlighted, press M button to switch in

between day, month and year which you want to set. And adjusting them

to current date by pressing the / button.

Finally, you need to press the button to confirm the adjustment and

the screen will back to previous menu.

d. Language:

his player can use difference OSD languages.

o set the language, choose “Language”, and then choose which

language as you desired by using / buttons and button.

e. Information:

You can view about the player information and disk memory status, such

as firmware version, remaining memory space available and the number of

support media files available in player.

In Setup menu, choose “Information” by using / button and

button, a list appears to use.

Choose “Player information” or “Disk space” which you want to view.

f. Factory Settings:

In Setup menu, choose “Factory settings”, a dialog “Restore factory

settings?” will pop up to confirm;

Choose “Yes” to confirm. Or, “No” to abort.

Press button to exit Setup menu.

6. Use Bluetoot Menu

From main menu, choose “Bluetoot ” menu by using / and

buttons, a Bluetooth list menu “Searc Device / Device’s List / All Music

/ BT Now Playing” is appear to choose;

Before pairing, please make sure your Bluetooth Receiver Device

supports Bluetooth A2DP profile.

Keep the device in 1 meter of your Bluetooth receiver device.

Switch on your Bluetooth receiver device and enable it to searching /

pairing mode.

a. Searc Device

Choose “Searc Device” to enter into the Bluetooth searching mode by

using / and buttons on player, the device searching mode is

starting, for approximate 10 ~ 20 seconds, a device(s) name list will

appear to choose for pairing.

Choose the device’s name which you want to pair then choose

“Pair/Connect” by using / and buttons, wait for few

seconds both device should be paired and the first song in music list will

playing automatically from you Bluetooth receiver device. And,

he screen is switch to “BT Now Playing” interface and a Bluetooth icon

“ “is displaying at the information bar, the Bluetooth is in transmitting.

“BT Now Playing”

o search for new Bluetooth Device;

Before you search for new device, please disconnect the current paired

device. For better result, turn the paired Bluetooth receiver to power off.

Choose “Searc Device” the device searching mode will start again for

new device(s) name list to choose again;

Choose new found and wanted Bluetooth receiver device for pairing.

b. Device’s List

Choose “Device’s List” to enter into the paired device list, you can

disconnect or un-pair it, also can re-connect those devices if it’s in

operating range.

In device’s list, choose the device’s name and choose you desired

function “Disconnect” or “Connect / Unpair” as you want. However,

make sure that you have disconnected the linking device before connect

the new wanted device.

Reconnect a pair Bluetooth device;

Automatically connecting: every time when turn “On” the Bluetooth

transmission function, it will automatically reconnect to the last

connected device if the receiver device is still in reconnect mode.

However, some Bluetooth receiver device may need to turn it “Off and

Bluetooth Transmission is On

On” again for reconnecting. If not;

Manual connecting: some Bluetooth receiver device may need to

reconnect manually; turn it power Off and On again for reconnecting. Or;

Choose “Device’s List” again by using / and buttons, then

choose the known device and choose “Connect” for reconnecting.

c. All Music

Choose “All Music” to enter into music list, you can direct select the

wanted music for play and transmitting by using / and

buttons

d. BT Now Playing

Choose “BT Now Playing” to return now playing interface.

In “B Now Playing” interface, you can selects; Previous / Next song file,

Play / Pause the song and adjust the Volume Up/Down by using the /

, and / buttons respectively. .

To Recall t e Bluetoot ’s Submenu / Exit Bluetoot Function

Press button, to recall the Bluetooth’s submenu. Or,

Pressing button until a “Exit BT Transmission?” dialog appear for

confirm. Choose “Yes” to exit by using / and buttons, the

Bluetooth function will turn Off and return to main menu screen. Choose

“No” to abort.

Bluetooth Function Limitation:

1. When you turn the player into luetooth audio transmitting mode, the

player earphone output sound will turned to Off automatically;

2. Only music format files with MP3, WMA and WAV can be transmitting by

the player’s luetooth function in music playing interface mode.

3. Fast-Forward and Fast ackward is not allowed to use in luetooth mode.

7. Use Music Menu

You can use this music player to playback with almost full format of music

file of audio coding. o open the music player in Main Menu:

From main menu, choose “Music” by using / and button, a

list menu appears to use;

Choose “Artists / Albums / Genres / All song / Update Playlist” as you

desired;

Choose “Artists” to enter folder(s) list menu grouping by Artist name,

then choose who name of Artist folder > choose a song file in list where

start the play.

Choose “Albums” to enter folder(s) list menu grouping by Album name,

then choose who name of Album folder > choose a song file in list where

start the play.

Choose “Genres” to enter folder(s) list menu grouping by Genres name,

then choose who name of Genres folder > choose a song file in list where

start the play.

Choose “All song” to enter all songs list menu to select a song where

start the play. (Depend on current location of Local Folder and Card

Folder last chosen. And default is Local folder if Micro SD card is not

inserted)

Choose “Update playlist” to update the playlist when you found it show

incorrect; actually, it is normal due to some media files could be manual

deleted in player’s memory by user in some case. However, update the

playlist when necessary.

Choose “Local Folder” to use player’s internal memory as current

location, you will see all supported song files will list out in playlist when

item selected.

Choose “Card Folder” to use Micro SD Card memory as current location,

you will see all supported song files will list out in playlist when item

selected. However, a “Create list or not” will appear to confirm when

every time the Micro SD Card is plug in and used. Choose “Yes” to process,

a playlist will be generated for use. Choose “No” to abort.

Remark: The “Local Folder” and “Card Folder” items are will be existed only

in music menu when Micro SD card has plugged into the player.

“Music Menu”

“Music Now Playing Interface” “Music Submenu Menu”

To Play Music

In Artists / Albums / Genres / All song list menu, choose a song file to

star the play using by using / and button. hen the Music

interface will appears to view and use;

Play / Pause Song

In music now playing interface;

Press button to pause the playing music. Press it again to play.

Next / Fast-forward and Previous / Fast-backward Song file

Press button to play next music.

Autres manuels pour Xemio-767 BT

Table des matières

Autres manuels LENCO Lecteur MP3

LENCO

LENCO XEMIO-360 W Manuel utilisateur

LENCO

LENCO XEMIO-633 Manuel utilisateur

LENCO

LENCO XEMIO-244 Manuel utilisateur

LENCO

LENCO Xemio-769 Manuel utilisateur

LENCO

LENCO Xemio-245 Manuel utilisateur

LENCO

LENCO SCD-38 USB Manuel utilisateur

LENCO

LENCO Xemio-645 Manuel utilisateur

LENCO

LENCO Xemio-658 UK Manuel utilisateur

LENCO

LENCO CD-200 Manuel utilisateur

LENCO

LENCO Xemio-653 Manuel utilisateur

LENCO

LENCO XEMIO-732 R Manuel utilisateur

LENCO

LENCO XEMIO-149 Manuel utilisateur

LENCO

LENCO XEMIO-760 BT Manuel utilisateur

LENCO

LENCO XEMIO-106 Manuel utilisateur

LENCO

LENCO MP CARD Manuel utilisateur

LENCO

LENCO PODO-151 Manuel utilisateur

LENCO

LENCO Xemio-154PK Manuel utilisateur

LENCO

LENCO CD-3772 MP3 Manuel utilisateur

LENCO

LENCO Xemio-767 BT Manuel utilisateur

LENCO

LENCO Xemio-668 Manuel utilisateur

LENCO

LENCO CD-202 Manuel utilisateur

LENCO

LENCO XEMIO-253 Manuel utilisateur

LENCO

LENCO XEMIO-117 Manuel utilisateur

LENCO

LENCO SCD-50 BT Manuel utilisateur

Manuels Lecteur MP3 populaires d'autres marques

Blaupunkt

Blaupunkt Compact Drive MP3 Manuel utilisateur

Memorex

Memorex MMP9008 - 8GB USB 2.0 Manuel utilisateur

Meizu Electronic Technology

Meizu Electronic Technology E5 Manuel utilisateur

Naxa

Naxa NMV-173NX Manuel utilisateur

Philips

Philips PSA250 Manuel utilisateur

Zipy

Zipy go! Waving Manuel utilisateur

Sylvania

Sylvania SMPK4068 Manuel utilisateur

Sony

Sony NW-MS7 - Memory Stick Walkman Manuel utilisateur

Irradio

Irradio RF-42UC Manuel utilisateur

NABAIJI

NABAIJI SWIM MUSIC 100 Manuel utilisateur

Laser

Laser MP3-A9-4GB Manuel utilisateur

Samsung

Samsung YP-T7F Manuel utilisateur

Savant

Savant SMS-1001-00 Guide de référence rapide

Trevi

Trevi XP 71 BT Manuel utilisateur

AGPtek

AGPtek C2 Manuel utilisateur

MobiBlu

MobiBlu DAH-1500i Manuel utilisateur

Denver

Denver MPS-201 Manuel utilisateur

Steren

Steren MP3-002 Manuel utilisateur