LENCO DVT-229 Manuel utilisateur

Contents

zIntroduction

zWarning

zCaution

zMain Unit Description

zRemote Control

zOSD basic adjustment

zDTV Features

zUSB Features

zDVD manual

zSpecifications

zTrouble Shooting

Introduction

Thank you very much for your purchase of our product of LCD TV. It serves as a normal

colour TV and PC monitor. To enjoy your TV to the full from the very beginning, read this manual

carefully and keep it handy for ready reference.

INSTALLATION

①Locate the TV in a room where direct light does not strike the screen. Total darkness or a

reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for

comfortable viewing.

② Allow enough space between the receiver and the wall to permit ventilation.

③Avoid excessively warm locations to prevent possible damage to the cabinet or premature

component failure.

④ This TV can be connected to AC100-240V 50/60HZ.

⑤ Do not install the TV in a location near heat sources such as radiator, air ducts, direct sunlight,

or in a place somewhere like close compartment and close area. Do not cover the ventilation

openings when using the TV.

⑥The indicator light will last about 30 seconds to go out after cutting off the electricity, during

this period, you cannot repower it on until the indicator light goes out, thanks a lot for your

attention!

Warning

This symbol is intended to alert the user to avoid the risk

of electric shock, do not disassemble this equipment by anyone

except a qualified service personnel.

This symbol is intended to alert the user to the presence

of important operation and maintenance instructions in

the literature accompanying the equipment.

CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER- SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution

Highvoltagesare used in the operation of this product.

- Donot

open the product's casing. Refer servicing

to qualified service personnel .

Caution

To prevent fire or electrical shock hazard, Do not expose

the main unit to moisture.

Caution

Do not drop or push objects into the television cabinet

slots or openings. Never spill any kind of liquid on the

television receiver.

Caution

Avoid exposing the main unit to direct sunlight and other

sources of heat. Do not stand the television receiver

directly on other products which give off heat. E. g. video

cassette players, Audio amplifiers. Do not block the

ventilation holes in the back cover. Ventilation is essential

to prevent failure of electrical component. Do not squash

powersupplycordunderthemain

unit or other heavy objects.

Caution

Never stand on, lean on, push suddenly the product

or its stand. You should Pay special attention to

children.

Caution

Do not place the main unit on an unstable cart stand,

shelf or table. Serious injury to an individual, and

damage to the television, may result if it should fall.

Caution

Whentheproductis not used for an extended period

of time, it is advisable to disconnect the AC power

cord from the AC outlet.

Caution

The LCD panel used in this product is made of glass.

Therefore,itcan break when the product is dropped

or applied with impact. Be careful not to be injured

by broken glass pieces in case the LCD panel breaks.

Main unit description

Control Panel Button Function

TV Terminal Connections

1. USB input terminal (Only used for upgrading software).

2. HDMI input terminal.

3. VGA input terminal.

4. PC AUDIO input terminal.

5. SCART input terminal.

6. Video input terminal .

7. AUDIO input terminal.

8. ATV antenna/close circuit TV network port or DTV antenna port.

9. HEADPHONE output terminal.

10. CI input terminal. (optional)

Power Input Configuration

AC POWER

VOL+ : Volume up.

VOL- : Volume down.

CH+ : TV channel up.

CH- : TV channel down.

MENU : Press to select the main menu.

TV/AV : Select the input signal.

POWER : Switch on when in standby mode or enter the standby mode.

Remote control

POWER: Press this button to switch on the TV when at

standby mode or enter standby mode.

MUTE: Press this button to mute or restore sound.

DVD SETUP: Press this button to enter the DVD main menu

and press again to exit the main menu.

(Used for models with DVD function only)

TITLE: Press this button to return the title menu.

(Used for models with DVD function only)

MENU(BLUE): Press this button to return the root menu or

exit the DVD main menu.

(Used for models with DVD function only)

USB/CR: This button is not available.

NICAM/A2: In the TV condition, press this button to select

the sound effects.

SLEEP: Set the sleep timer.

ASPECT: Press to select the different picture size.

EJECT : press to eject the DVD-disc in DVD mode.

(Used for models with DVD function only)

DISPLAY: Display TV information.

AUTO: Press to adjust the picture automatically in PC mode.

PMODE: Select picture mode.

SMODE: Select sound mode.

DTV: Press to enter the DTV channel.

(Used for models with DTV function only)

SOURCE: Press to change signal source.

ENTER: Enter the selected option or perform the selected

operation.

MENU: Press this button to enter the main menu for various

optional adjustable setting.

EXIT: Exit the OSD (On-screen display).

0-9: Select and switch to a channel using 0 - 9.

-/--:Channel list.

:Switch back and front between the current and previous

channels.

CH+/CH-: Change the channel up and down.

VOL+/VOL-: Adjust the volume.

INFO: Display some information of current program in DTV

mode.

(Used for models with DTV function only)

AUDIO: Press to select the DTV audio or DVD audio.

(Used for models with DTV or DVD function only)

FAV: Switch between custom set “Favourite List”.

(Used for models with DTV function only)

TV/RADIO: Switch between DTV program and radio

program (only audio but not image).

(Used for models with DTV function only)

EPG: Enter electronic program guide.

(Used for models with DTV function only)

：Stop playing the disc.

(Used for models with DVD function only)

SUBTITLE(GREEN): Open or close subtitle.

(Used for models with DTV function only)

TEXT: Press to enter the Teletext mode.

(Used for European region only)

：Press to start playing the disc to pause playing.

(Used for models with DVD function only)

HOLD: Freeze a multi-page passage on screen in Teletext

mode. (Used for European region only).

INDEX: Press this button to go to the index page in Teletext.

(Used for European region only)

：Press to play backward.

(Used for models with DVD function only)

SIZE: Display the top, bottom or all of page to read easily in

Teletext mode.

(Used for European region only)

：Press to play forward.

(Used for models with DVD function only)

REVEAL: Press this button to reveal the hidden information

in Teletext page. Press again to hide the information.

(Used for European region only)

：Skip to previous chapter

(Used for models with DVD function only)

SUBPAGE: Carry out the function of SUBCODE in the text

while enter the text display mode.

(Used for European region only)

：Skip to next chapter

(Used for models with DVD function only)

ZOOM：Select the zoom picture.

(Used for models with DVD function only)

GOTO：Jump to the appointed chapter or title.

(Used for models with DVD function only)

SUBTITLE(BLUE)：Select the disc caption.

(Used for models with DVD function only)

ANGLE：Select the angle.

(Used for models with DVD function only)

PROGRAM：Select the disc program.

(Used for models with DVD function only)

INTRO：Press the button to display the time of chapter

remain or elapsed.

(Used for models with DVD function only)

REPEAT：Select the repeat mode.

(Used for models with DVD function only)

AB：Select the segment to repeat.

(Used for models with DVD function only)

RED,GREEN,YELLOW, BLUE: Correpond to

the different colored subjects.

(Used for european region function only)

Table des matières

Langues :

Autres manuels LENCO Téléviseur LCD

LENCO

LENCO TFT-2411 Manuel utilisateur

LENCO

LENCO DVT-2632 Manuel utilisateur

LENCO

LENCO DVT-2422 Manuel utilisateur

LENCO

LENCO DVT-1932 Manuel utilisateur

LENCO

LENCO DVT-1523 - Manuel utilisateur

LENCO

LENCO DVT-2622 Manuel utilisateur

LENCO

LENCO TFT-1028 Manuel utilisateur

LENCO

LENCO DVT-194 Manuel utilisateur

LENCO

LENCO DVL-2214 Manuel utilisateur

LENCO

LENCO DVT-224 Manuel utilisateur

LENCO

LENCO DVT-154 Manuel utilisateur

LENCO

LENCO DVT-221 Manuel utilisateur

LENCO

LENCO DVT-2421 Manuel utilisateur

LENCO

LENCO DVT-220 Manuel utilisateur

LENCO

LENCO TFT-2412 Manuel utilisateur

LENCO

LENCO TFT-2402 Manuel utilisateur

LENCO

LENCO TFT-2401 Manuel utilisateur

LENCO

LENCO TFT-1021 Manuel utilisateur

LENCO

LENCO DVT-1533 Manuel utilisateur

LENCO

LENCO DVT-1522 Manuel utilisateur

LENCO

LENCO TFT-2411 Manuel utilisateur

LENCO

LENCO TFT-2412 Manuel utilisateur

LENCO

LENCO TFT-350 Manuel utilisateur

LENCO

LENCO DVT 1926 Manuel utilisateur

Manuels Téléviseur LCD populaires d'autres marques

LG 32LC4R* Manuel utilisateur

ViewSonic

ViewSonic N4200w-1 VS10945-1M Manuel utilisateur

Salora

Salora 22LED1600 Manuel utilisateur

Samsung

Samsung LA32E420 Mode d’emploi

Dell

Dell W1900 19 Instructions d'utilisation

Samsung

Samsung LN40C670M1F Manuel utilisateur

Samsung

Samsung Series 4+ Manuel utilisateur

Samsung

Samsung 5 Series Manuel utilisateur

Grundig

Grundig 40 VLE 8230 BP Manuel utilisateur

Philips

Philips 43PFL4901/F7 Manuel utilisateur

Sony

Sony Bravia XBR-43X830C Manuel utilisateur

LG 32LS350 Manuel utilisateur

VIORE

VIORE LED32VF60 Manuel utilisateur

Toshiba

Toshiba Regza 42HL167 Manuel utilisateur

JVC

JVC LT-32A220 Manuel utilisateur

Philips

Philips 20TA1000/93 Manuel utilisateur

Philips

Philips 32PFL3158T/12 Manuel utilisateur

Sony

Sony Bravia KDL-V32XBR2 Manuel utilisateur