LENCO DVT-220 Manuel utilisateur
1
Contents
zIntroduction
zWarning
zCaution
zMain Unit Description
zRemote Control
zOSD basic adjustment
zDTV Features
zUSB/CARD Reader Operation
zSpecifications
zTrouble Shooting
2
Introduction
Thank you very much for your purchase of our product of LCD TV. It serves as a normal color
TV and PC monitor. To enjoy your set to the full from the very beginning, read this manual
carefully and keep it handy for ready reference.
INSTALLATION
①Locate the receiver in the room where direct light does not strike the screen. Total darkness or
a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
② Allow enough space between the receiver and the wall to permit ventilation.
③Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
④ This TV receiver can be connected to AC100-240V 50/60HZ.
⑤ Do not install the receiver in a location near heat sources such as radiator, air ducts, direct
sunlight, or in a place somewhere like close compartment and close area. Do not cover the
ventilation openings when using the set.
⑥The indicator light will last about 30 seconds to go out after cutting off the electricity, during
this period, you cannot repower it on until the indicator light goes out, thanks a lot for your
attention!
3
Warning
This symbol is intended to alert the user to avoid the risk
of electric shock, do not disassemble this equipment by anyone
except a qualified service personnel.
This symbol is intended to alert the user to the presence
of important operation and maintenance instructions in
the literature accompanying the equipment.
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER- SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Caution
Caution
Highvoltagesare used in the operation of this product.
- Do not remove the back cabinet from your set. Refer
servicing to qualified service personnel.
Caution
To prevent fire or electrical shock hazard, Do not expose
the main unit to moisture.
Caution
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Caution
Avoid exposing the main unit to direct sunlight and other
source of the heat. Do not stand the television receiver
directly on other produces which give off heat. E. g. video
cassette players, Audio amplifiers. Do not block the
ventilation holes in the back cover. Ventilation is essential
topreventfailure of electrical component. Do not squash
power supply cord under the main unit.
5
Caution
Caution
Never stand on, lean on, push suddenly the product
or its stand. You should pay special attention to
children.
Caution
Do not place the main unit on an unstable cart stand,
shelf or table. Serious injury to an individual, and
damage to the television, may result if it should fall.
Caution
Whentheproductis not used for an extended period
of time, it is advisable to disconnect the AC power
cord from the AC outlet.
Caution
The LCD panel used in this product is made of glass.
Therefore,itcan break when the product is dropped
or applied with impact. Be careful not to be injured
by broken glass pieces in case the LCD panel breaks.
6
Main unit description
Control Panel Button Function
TV Terminal Connections
1 .USB input terminal.
2. HDMI input terminal.
3. VGA input terminal of simulation signal of PC.
4. PC AUDIO terminal.
5. SCART input terminal.
6. Video input terminal.
7. AUDIO input terminal.
8. ATV antenna/close circuit TV network port or DTV antenna port.
9. HEADPHONE output terminal.
Power Input Configuration
AC POWER
VOL+ : Volume up.
VOL- : Volume down.
CH+ : TV channel up.
CH- : TV channel down.
MENU : Press to select the main menu.
TV/AV : Select the input signal.
POWER : Switch on when at standby mode or enter the standby mode.
7
Optional Configuration as below:
Connect the USB/CARD storage to the USB/CARD
jack on the set.
NOTE
● It is only 500 mA MAX of DC current output when you connect with USB jack or CARD
socket.
● To ensure the Mobile HD works well, you should use other power supply for the Mobile HD.
And do not use the USB jack and CARD socket in the same time.
●It supports Mobile HD by connecting with USB jack. The partitions of the Mobile HD can’t be
more than 4 partitions. The max partition is 2TB. It supports FAT/FAT32 document. The max FAT
document is 4GB and the max FAT32 document is 2TB.
8
Remote control
POWER: Press this button to switch on the TV when at
standby mode or enter standby mode.
MUTE: Press this button to mute or restore sound.
NICAM/A2: In the TV condition, press this key to select
the sound effects.
SLEEP: Set the sleep timer.
ASPECT: Press to select the different picture size.
USB/CR: Press to select the MEDIA signal source.
(Used for models with USB/CR function only)
DISPLAY: Display TV information .
AUTO: Press to adjust the picture automatically in PC
mode.
PMODE: Select picture mode.
SMODE: Select sound mode.
DTV: Press to enter the DTV channel.
(Used for models with DTV function only)
SOURCE: Press to change signal source.
ENTER: Enter the selected option or perform the selected
operation.
MENU: Press this button to enter the main menu for
various optional adjustable setting.
EXIT: Exit the OSD (On-screen display).
0-9: Select and switch to a channel using 0 - 9.
-/--: Switch the program digit.
:Switch back and front between the current and
previous channels.
CH-/CH+: Change the channel up and down.
VOL-/VOL+:Adjust the volume.
INFO: Display some information of current program in
DTV mode.
(Used for models with DTV function only)
AUDIO: Press to select the DTV audio.
(Used for models with DTV function only)
FAV: Switch between custom set " Favourite List"
(Used for models with DTV function only)
TV/RADIO: Switch between DTV program and radio
program (only audio but not image).
(Used for models with DTV function only)
9
EPG: Enter electronic program guide.
(Used for models with DTV function only)
：Stop playing the MEDIA or stop to record.
(Used for models with USB/CR function only)
SUBTITLE: Open or close subtitle.
(Used for models with DTV function only)
TEXT: Press to enter the Teletext mode.
(Used for European region only)
：Press to start playing the MEDIA or to pause
playing.
(Used for models with USB/CR function only)
HOLD: Freeze a multi-page passage on screen in
Teletext mode. (Used for European region only)
:Starttorecord.
INDEX: Press this button to go to the index page in
Teletext.
(Used for European region only)
：Press to play backward.
(Used for models with USB/CR function only)
SIZE: Display the top, bottom or all of page to read
easily in Teletext mode.
(Used for European region only)
：Press to play forward.
(Used for models with USB/CR function only)
REVEAL: Press this button to reveal the hidden
information in Teletext page. Press again to hide the
information.
(Used for European region only)
：Skip to previous chapter
(Used for models with USB/CR function only)
SUBPAGE: Carry out the function of SUBCODE in the
text while enter the text display mode.
(Used for European region only)
：Skip to next chapter
(Used for models with USB/CR function only)
RED,GREEN,YELLOW, CYAN: Correpond to
the different colored subjects.
(Used for european region and USB/CR function only)
Table des matières
Autres manuels LENCO Téléviseur LCD
LENCO
LENCO DVT-2432 Manuel utilisateur
LENCO
LENCO DVT-2422 Manuel utilisateur
LENCO
LENCO DVT-1932 Manuel utilisateur
LENCO
LENCO DVT-2232 Manuel utilisateur
LENCO
LENCO DVT-154 Manuel utilisateur
LENCO
LENCO TFT-2401 Manuel utilisateur
LENCO
LENCO TFT-920 Manuel utilisateur
LENCO
LENCO DVT-227 Manuel utilisateur
LENCO
LENCO TFT-2411 Manuel utilisateur
LENCO
LENCO DVT 2233 Manuel utilisateur
LENCO
LENCO TFT-2401 Manuel utilisateur
LENCO
LENCO TFT-2412 Manuel utilisateur
LENCO
LENCO DVT-1523 - Manuel utilisateur
LENCO
LENCO DVT-2632 Manuel utilisateur
LENCO
LENCO DVT 1926 Manuel utilisateur
LENCO
LENCO DVL-2214 Manuel utilisateur
LENCO
LENCO TFT-2402 Manuel utilisateur
LENCO
LENCO TFT-1026 Manuel utilisateur
LENCO
LENCO TFT-360 Manuel utilisateur
LENCO
LENCO DVT-194 Manuel utilisateur
