LELY SPLENDIMO T Manuel utilisateur
SPLENDIMO T
E-HV.009.1002
OPERATOR’S MANUAL
SPLENDIMO 280 T
OPERATOR’S MANUAL
SPLENDIMO T
Ehe009
-d
SPLENDIMO®is a registered trademark. The right of exclusive use belongs to the companies of the LELY
Group.
©2002. All rights reserved. Nothing of this publication may be reproduced and/or published by printing,
photocopying, microfilm or any other way without the prior written permission of LELY INDUSTRIES N.V..
TABLE OF CONTENTS................................................................................................. page
PREFACE .....................................................................................................................27
WARRANTY CONDITIONS........................................................................................27
TYPE- AND SERIAL NUMBER OF YOUR MACHINE ............................................27
SAFETY INSTRUCTIONS..........................................................................................28
EXPLANATION OF SAFETY DECALS ON THE MACHINE...................................29
1INTRODUCTION .........................................................................................................30
2MOUNTING BEHIND THE TRACTOR ......................................................................31
3TRANSPORT................................................................................................... ............32
4MACHINE ADJUSTMENTS........................................................................................32
5OPERATING THE MACHINE .....................................................................................33
6DISMOUNTING FROM THE TRACTOR...................................................................34
7MAINTENANCE...........................................................................................................35
7.1 Maintenance after operations..........................................................................35
7.2 Lubrication .........................................................................................................35
7.3 Intermittent maintenance .................................................................................36
7.4 Replacement of knives .....................................................................................38
7.5 Change of oil in gearboxes..............................................................................38
7.6 Change of grease in mower elements............................................................39
Supplements:
ACUTTER BAR ASSEMBLY/DISASSEMBLY .............................................................40
BOPTIONAL EXTRAS
CTECHNICAL DETAILS ................................................................................................44
25
PREFACE
This Operator’s Manual is meant for personnel that are
operating the machine and are responsible for its daily
maintenance.
Kindly read this manual fully prior to starting work.
Such instructions as are related to your safety and/or that
of others are marked in the margin by a warning triangle
with exclamation mark. These instructions should be
observed with particular care and attention.
Instructions which may lead to serious material damage
in case of non-compliance or incorrect use are marked in
the margin by an exclamation mark.
The machine described in this manual may contain compo-
nents which do not form part of the standard equipment but
are available as optional extras. This is not made clear in all
cases, because standard specifications may differ from
country to country.
Furthermore, machines and optional extras may be adjusted
to specific regional conditions whilst they are also subject to
permanent research and innovation. For this reason, the
specifications of your machine may not be consistent with the
pictures in this manual.
WARRANTY CONDITIONS
For those parts which fail in normal operating conditions the
factory will make replacement parts available, free of charge,
for a period of 12 (twelve) months from the date of purchase.
Warranty shall not apply if the instructions mentioned in this
manual have not been met, or if they have not been met
completely or correctly. Neither shall warranty apply in case
of modification of the machine by you or third parties
without our foreknowledge and/or authorisation.
TYPE- AND SERIAL NUMBER OF
YOUR MACHINE
The type/serial number plate is fitted to the coupling hitch,
near the hydraulic ram.
In case of correspondence and ordering of spare parts, kindly
state the type- and serial number of your machine. Complete
the box below with these numbers.
27
!
Typenummer
Serienummer
SAFETY INSTRUCTIONS
• Use the machine only for the purpose for which it was
designed.
• Follow all prevailing safety regulations, including those
laid down in this manual and occurring on the machine.
• Operate this machine in a safe way.
• The machine should be operated by authorised persons
only.
• Be alert and observe all safety precautions.
• Make sure that all safety guards and protection devices
areinplace.
• Keep out of reach of moving parts.
• Stop engine, PTO and moving parts before adjusting,
cleaning or lubricating the machine.
• Take care that nobody will be within the dangerous zone
while the machine is in operation and be sure that
people are kept well away from the machine. This is
especially important when working along roads and
near or on fields that are accessible to the public.
• Use always a tractor with a cab.
• Clear the field of objects that could be thrown up by the
machine.
• Observe the prevailing legislation for public road
transport
• Use flashing lights or other safety signs, when required.
• Don’t stand on the machine.
• Use genuine Lely parts only.
• Remove the pressure from hydraulic systems before
starting work on them and/or before
coupling/uncoupling hydraulic hoses.
• Use protective clothing, gloves and/or safety glasses if
required.
• Clean the safety decals regularly so that they can be
read at all times.
28
EXPLANATION OF SAFETY DECALS ON THE
MACHINE
• Carefully read operator’s manual before handling the
machine. Observe instructions and safety rules when
operating.
• Attention! Moving parts.
Stay clear of rotating machine parts.
• Danger of flying objects.
Maintain a sufficient, safe distance from the machine as
long as the tractor engine is running.
• Danger of mower knives.
Maintain a sufficient, safe distance from the machine as
long as the tractor engine is running.
• Danger of cutter bar dropping down.
Keep away from the cutter bar movement area.
• Tractor PTO speed is never allowed to exceed 540 RPM.
• Danger of moving parts!
Read the operating instruction of the PTO shaft.
Never use a PTO shaft without protection.
29
1INTRODUCTION
The LELY SPLENDIMO T is a disc mower which is used for
mowing grass lands and road sides. Mowing on slopes up to
approx. 10° up and 10° down is within the machine’s
capability.
The machine is fitted with discs of the “S” or “N” model (fig.
1).
The cutter bar is composed of cutting units according to the
modular LELY system. These elements as well as the inter-
mediate spacers are torqued together by a connecting rod.
The first cutting unit is driven from the top. A springsteel
shaft, which is driven from the first cutting unit, drives the
other units of the cutter bar.
Cutting units rotate either to the left or right. Standard
configurations are shown in fig. 2.
If required, the cutting units of the SPLENDIMO T mower
with “S” model discs can be fitted in a different confi-
guration.
The SPLENDIMO T mower can be controlled with just one
hydraulic ram.
A breakback device prevents damage to the machine if an
obstacle is hit.
30
1
2
"N""S"
SPLENDIMO 240 TS
SPLENDIMO 280 TS
SPLENDIMO 320 TS
SPLENDIMO 320 TN
SPLENDIMO 280 TN
SPLENDIMO 240 TN
SPLENDIMO 360 TS
SPLENDIMO 360 TN
Table des matières
Autres manuels LELY Tondeuse à gazon
Manuels Tondeuse à gazon populaires d'autres marques
RHINO
RHINO 1958 Manuel utilisateur
Wolf Garten
Wolf Garten Compact plus 40 B Manuel utilisateur
Cub Cadet
Cub Cadet LTX 1045 Manuel utilisateur
Craftsman
Craftsman 917.378461 Manuel utilisateur
GGP ITALY SPA
GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur
Challenge
Challenge CH18V2 Instructions de fonctionnement
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuel utilisateur
DEWEZE
DEWEZE ATM-725 Manuel d'utilisation
Weed Eater
Weed Eater 180083 Manuel utilisateur
Husqvarna
Husqvarna Poulan Pro PP185A42 Manuel utilisateur
Better Outdoor Products
Better Outdoor Products Quick Series Manuel utilisateur
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuel d'utilisation
