LELY Splendimo 320 M Manuel utilisateur

Lely Splendimo

320 M

M-H026.1004EN

Operator Manual

TRADEMARKS, COPYRIGHT AND

DISCLAIMER

Lely, Astronaut, Astri, Atlantis, Attis, AWS, C4C, Calfix, Calm, Commodus,

Compedes, Cosmix, Discovery, F4C, Fertiliner, Gravitor, Grazeway, Hibiscus,

Hubble, Juno, L4C, Lely Center, Lelywash, Lotus, Luna, Nautilus, Orbiter,

Qwes, SAE, Shuttle, Splendimo, T4C, Tigo, Viseo, Voyager, Walkway and

Welger are registered trademarks of the Lely Group. The right of exclusive use

information given in this publication is provided for information purposes only

and does not constitute an offer for sale. Certain products may not be available

in individual countries and products supplied may differ from those illustrated.

No part of this publication may be copied or published by means of printing,

photocopying, microfilm or any other process whatsoever without prior

permission in writing by Lely Holding S.à r.l. Although the contents of this

publication have been compiled with the greatest possible care, Lely cannot

accept liability for any damage that might arise from errors or omissions in this

publication.

The English language manual is the original manual. Translations into other

languages use the English language manual as the source document. Lely

accepts no liability for discrepancies between the original English language

manual and versions in other languages. If there is a conflict over the content

and accuracy of any translated manual, the English language manual is the

authority document.

Lely Industries NV

Weverskade 110

3147 PA Maassluis

The Netherlands

Phone: Tel: +31 (0)10 59 96 333

Fax: Fax: +31 (0)10 59 96 444

Website: www.lely.com

PREFACE

Manual Contents

This manual contains the information necessary to operate the Lely

Splendimo. It also includes maintenance information that can be done by an

operator.

Study and understand this information thoroughly before you operate the Lely

Splendimo. Failure to do so could result in personal injury or damage to

equipment. Please consult your local Lely service provider if you do not

understand the information in this manual, or if you need additional information.

All information in this manual has been compiled with care. Lely shall not be

liable for errors or faults in this manual. The recommendations are meant to

serve as guidelines. All instructions, pictures and specifications in this manual

are based on the latest information that was available at the time of publication.

Your Lely Splendimo may comprise improvements, features or options that are

not covered in this manual.

Warranty Conditions

For those parts that fall under normal operating conditions, the factory will

make replacement parts available, free of charge, for a period of 12 (twelve)

months from the date of purchase.

The warranty shall not apply if the instructions mentioned in this manual have

not been followed, or if they have not been followed completely or correctly.

Nor will the warranty apply if you or third parties modify the machine without

our foreknowledge and/or authorisation.

Registration

The Type and Serial Number Plate is on the front of the headstock.

Always include the type and serial numbers of your product when you contact

your local Lely service provider or order spare parts.

Type and Serial Number Plate

We suggest you complete the table below with the type and serial numbers of

your product. This makes sure you can easily find the information.

Type number

Serial number

iii

Table of Contents

1. Introduction.........................................................................................................................................1-1

1.1 Introduction 320 M...................................................................................................................1-1

1.2 Cutter Bar.................................................................................................................................1-2

1.3 Hydraulic System.....................................................................................................................1-2

1.4 Optional Extras Lely Splendimo 320 M....................................................................................1-3

1.4.1 Wear Plates.............................................................................................................................1-3

1.4.2 Topping Skids..........................................................................................................................1-3

1.4.3 Agitators...................................................................................................................................1-3

1.4.4 Crop Divider.............................................................................................................................1-3

1.4.5 Swath Wheel Kit.......................................................................................................................1-4

2. Safety...................................................................................................................................................2-1

2.1 Signal Words............................................................................................................................2-1

2.2 Safety Instructions....................................................................................................................2-1

2.3 Explanation of the Safety Decals on the Lely Splendimo 320 M..............................................2-2

2.4 Position of the Safety Decals on the Lely Splendimo 320 M....................................................2-3

3. Operation.............................................................................................................................................3-1

3.1 Connect the Splendimo to the Tractor.....................................................................................3-1

3.2 Disconnect the Splendimo from the Tractor.............................................................................3-3

3.3 Move the Splendimo to the Transport Position........................................................................3-5

3.4 Move the Splendimo from the Transport Position to the Working Position..............................3-6

3.5 Move the Splendimo from the Working Position to the Headland Position..............................3-6

3.6 Start Mowing............................................................................................................................3-7

3.7 Stop Mowing............................................................................................................................3-8

4. Test and Adjustment..........................................................................................................................4-1

4.1 Adjust the Mowing Height........................................................................................................4-1

4.2 Adjust the Ground Pressure.....................................................................................................4-2

5. Maintenance........................................................................................................................................5-1

5.1 Scheduled Maintenance...........................................................................................................5-1

5.1.1 Maintenance After Operation...................................................................................................5-1

5.1.2 Maintenance After the First 30 Working Hours........................................................................5-1

5.1.3 Maintenance Every 50 Working Hours....................................................................................5-1

5.1.4 Maintenance Every 100 Working Hours..................................................................................5-1

5.1.5 Maintenance Every 250 Working Hours..................................................................................5-1

5.1.6 Maintenance Every 500 Working Hours or 1000 Hectare........................................................5-1

Table of Contents v

M-H026.1004EN

5.1.7 Maintenance Before Prolonged Storage..................................................................................5-1

5.1.8 Maintenance After Prolonged Storage.....................................................................................5-2

5.2 Preventive Maintenance...........................................................................................................5-3

5.2.1 Clean the Splendimo................................................................................................................5-3

5.2.2 Grease the Pivot Points...........................................................................................................5-3

5.2.3 Grease the PTO shaft..............................................................................................................5-4

5.2.4 Replace the Gearbox Oil..........................................................................................................5-5

5.2.5 Replace the Drive Element Oil.................................................................................................5-6

5.2.6 Grease a Mower Element........................................................................................................5-7

5.3 Corrective Maintenance...........................................................................................................5-9

5.3.1 Remove and Install a Mower Knive.........................................................................................5-9

5.3.2 Remove and Install a Mower Disc.........................................................................................5-12

5.3.3 Remove and Install a Mower Disc on a Drive Element..........................................................5-13

5.3.4 Disassemble the Cutter Bar...................................................................................................5-14

5.3.5 Assemble the Cutter Bar........................................................................................................5-16

6. Diagrams and Tables.........................................................................................................................6-1

6.1 Bolt and Nut Torque Table.......................................................................................................6-1

7. Troubleshooting.................................................................................................................................7-1

8. Specifications.....................................................................................................................................8-1

8.1 Splendimo 320 M Specifications..............................................................................................8-1

vi Table of Contents

M-H026.1004EN

1. INTRODUCTION

1.1 Introduction 320 M

The Lely Splendimo 320 M is a mower-to cut fodder crops.

The range of operation of the Lely Splendimo 320 M is between ± 20° from the

horizontal (relative to the tractor), and can be driven at speeds up to 20 km/h.

Central suspension of the Splendimo enables the Lely Splendimo 320 M to

follow ground contours accurately.

An anti-shock device protects the machine from damage if it hits obstacles

during mowing.

A headstock connects the mower to the tractor. The headstock contains

catergory II double linkage pins to adjust the position of the mower behind the

tractor.

The Lely Splendimo 320 M has:

• A cutter bar

• A hydraulic control system

• An adjustable ground-pressure relief system.

Various optional extras are also available. Refer to Optional Extras Lely

Splendimo 320 M (page 1-3).

Introduction 1-1

M-H026.1004EN

1. Headstock - 2. Operating cord - 3. Primary PTO-shaft - 4. Parking jack - 5. Hydraulic ram

- 6. Secondary PTO-shaft - 7. Cutter bar - 8. Mower disc

Figure 1. Overview of the Lely Splendimo 320 M

1.2 Cutter Bar

The cutter bar contains the mower units. The modular design of the cutter bar

enables quick and easy replacement of mower units and drive shafts if they

are damaged. The mower units are connected to each other by a rod.

The first mower unit is driven from the top. A spring-steel shaft then transfers

the drive from the first mower unit to the other mower units. All mower units

are directly driven by this shaft.

The mower units turn in pairs, either clockwise or counterclockwise.

The mower knives are connected to the mower units by the Splendimo Clip

quick-release system. This enables easy replacement of mower knives.

1.3 Hydraulic System

The hydraulic system raises and lowers the cutter bar.

When the hydraulic system is set to the floating position the cutter bar can

closely follow ground contours.

1-2 Introduction

M-H026.1004EN

The ground-pressure relief system makes sure the cutter bar follows the

ground contours without damaging the crop and transfers some of the

Splendimo weight to the tractor.

It can be adjusted by regulating the pressure of the hydropneumatic spring

system.

1.4 Optional Extras Lely Splendimo 320 M

1.4.1 Wear Plates

Wear plates can be installed on the bottom of the skids to reduce wear of the

skids. The wear plates are available in thicknesses of 4 mm or 8 mm.

1. Wear plate - 2. Topping skid

Figure 2. Wear Plate and Topping Skid

1.4.2 Topping Skids

Topping skids can be installed on the bottom of the skids to raise the mowing

height approximately 3 cm. This is used for topping or when the mower is used

on rough ground, and reduces damage to the cutter bar by stones and other

debris.

If topping skids are installed, position 2 or 3 of the parking jack must be used

(fig. 9, page 3-4).

1.4.3 Agitators

Agitators can be installed on the mower discs to improve the crop flow across

the cutter bar in certain circumstances.

Figure 3. Agitator

1.4.4 Crop Divider

A crop divider pushes the crop that has not been mown to the side of the mower

and prevents an accumulation of grass on the mower.

This is useful when the crop is extremely long or when the crop lies down.

Introduction 1-3

M-H026.1004EN

Figure 4. Crop Divider

1.4.5 Swath Wheel Kit

A swath wheel kit limits the width of the swath.

Figure 5. Swath Wheel Kit

Figure 6. Double Swath Wheel Kit

1-4 Introduction

M-H026.1004EN

Autres manuels pour Splendimo 320 M

Table des matières

Autres manuels LELY Matériel agricole

LELY

LELY HIBISCUS 1525 Master Manuel utilisateur

LELY

LELY HIBISCUS 1015 Profi Manuel utilisateur

LELY

LELY 1015 CD Profi Manuel utilisateur

LELY

LELY SPLENDIMO MC Manuel utilisateur

LELY

LELY SPLENDIMO TRIPLO 920 C Manuel utilisateur

LELY

LELY HIBISCUS 725 Master Manuel utilisateur

LELY

LELY Splendimo 550 P Manuel utilisateur

LELY

LELY ASTRONAUT Manuel utilisateur

LELY

LELY Juno 100 Instructions originales

LELY

LELY Splendimo 240 MCR Manuel utilisateur

LELY

LELY LOTUS 460 Stabilo Manuel utilisateur

LELY

LELY DISCOVERY Manuel utilisateur

LELY

LELY COSMIX P Guide de configuration

LELY

LELY Tigo 35 S Classic Manuel utilisateur

LELY

LELY ASTRONAUT A3 Next Manuel utilisateur

LELY

LELY 770 P Manuel utilisateur

LELY

LELY Grazeway R Manuel utilisateur

LELY

LELY COSMIX S Guide de configuration

LELY

LELY HIBISCUS 455 Manuel utilisateur

LELY

LELY HIBISCUS 765 SD Vario Manuel utilisateur

LELY

LELY LOTUS 1325 Manuel utilisateur

LELY

LELY LOTUS 1020 Manuel utilisateur

LELY

LELY Splendimo Triplo 801 Manuel utilisateur

LELY

LELY Juno 100 Instructions originales

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur