Leica Geosystems BLK3D Manuel utilisateur

Leica BLK3D

User Manual

Version 2.2

English

Introduction

Congratulations on the purchase of the Leica BLK3D.

The symbols used in this manual have the following meanings:

Type Description

☞Important paragraphs which must be adhered to in practice

as they enable the product to be used in a technically cor-

rect and efcient manner.

This manual contains important safety directions as well as instructions for

setting up the product and operating it. Refer to 20 Safety Directions for fur-

ther information.

Read carefully through the User Manual before you switch on the product.

The content of this document is subject to change without prior notice. Ensure

that the product is used in accordance with the latest version of this docu-

ment.

Updated versions are available for download at the following Internet address:

https://myworld.leica-geosystems.com > myDownloads.

The model and serial number of your product are indicated on the type plate.

Always refer to this information when you need to contact your agency or

Leica Geosystems authorised service centre.

This manual applies to the Leica Geosystems AG BLK3D.

On the last page of this manual, you can nd the address of Leica Geosystems

headquarters. For a list of regional contacts, please visit

http://leica-geosystems.com/contact-us/sales_support.

Purchase

Symbols

☞

Product identication

Validity of this

manual

Leica Geosystems

address book

Table of Contents

1 Instrument Components 5

2 Home Screen 6

3 Batteries 7

3.1 Operating Principles 7

3.2 Charging the Battery 7

3.2.1 Charging the Battery by USB Port on Device 7

3.2.2 Charging the Battery by USB Charger (Optional) 8

4 Power Functions 10

5 Update 11

6 Using the touchscreen 12

7 Activation 13

8 Settings 15

9 Measurement Principle 17

10 Reality Capture 22

10.1 Take a Picture 22

10.2 Measure Distances in Picture 23

10.3 Measure Areas in Picture 25

10.4 Accuracy Feedback 26

11 Laser 27

11.1 Distance 27

11.2 Smart Horizontal 28

11.3 Tracking 29

11.4 Area 29

11.5 Volume 30

12 Sketch & Document (Optional) 31

12.1 Import Plan (Optional) 31

12.2 Sketch Plan (Optional) 34

12.3 Smart Room (Optional) 37

12.4 Measure Plan (Optional) 38

12.5 Measure Facade (Optional) 40

13 BIM 360 (Optional) 42

14 Publisher (Optional) 46

15 Organiser 48

16 Check & Adjust 50

17 Care and Transport 53

17.1 Transport 53

17.2 Storage 53

17.3 Cleaning and Drying 54

18 Technical Data 55

18.1 Conformity to National Regulations 55

18.1.1 BLK3D 55

18.1.2 Dangerous Goods Regulations 55

18.2 General Technical Data of the Product 55

19 Warranty 59

Table of Contents 3

20 Safety Directions 60

20.1 General 60

20.2 Denition of Use 61

20.3 Limits of Use 61

20.4 Responsibilities 62

20.5 Hazards of Use 62

20.6 Laser Classication 64

20.6.1 General 64

20.6.2 BLK3D 64

20.7 Electromagnetic Compatibility (EMC) 65

20.8 FCC Statement, Applicable in U.S. 66

20.9 ISED Statements (EN/FR), Applicable in Canada 68

4 Table of Contents

1 Instrument Components

The Leica BLK3D Imager is a real-time, in picture 3D measurement solution.

See chapter Technical Data for scope of use.

a Touch screen

b Laser/Photo capture

c Back

d Home

e Laser/Photo capture

f Recents

g Photo capture

h USB port protection lid

i USB port

jPower Functions

Instrument compon-

ents

Instrument Components 5

2 Home Screen

a Status bar

b Side menu

cReality Capture

dSketch & Document (Optional)

e New Project

fLaser

gBIM 360 (Optional)

hOrganiser

Home screen

6 Home Screen

3 Batteries

3.1 Operating Principles

•The battery must be charged before using it for the rst time because it is

delivered with an energy content as low as possible.

•The permissible temperature range for charging is from 0 °C to

+40 °C/+32 °F to +104 °F. For optimal charging, we recommend charging

the batteries at a low ambient temperature of +10 °C to +20 °C/+50 °F to

+68 °F if possible.

•It is normal for the battery to become warm during charging. Using the

chargers recommended by Leica Geosystems, it is not possible to charge

the battery once the temperature is too high.

•For new batteries or batteries that have been stored for a long time

(> three months), it is effectual to make only one charge/discharge cycle.

•For Li-Ion batteries, a single discharging and charging cycle is sufcient.

We recommend carrying out the process when the battery capacity indic-

ated on the charger or on a Leica Geosystems product deviates signic-

antly from the actual battery capacity available.

•The batteries can be operated from −20 °C to +55 °C/−4 °F to +131 °F.

•Low operating temperatures reduce the capacity that can be drawn; high

operating temperatures reduce the service life of the battery.

CAUTION

Connecting the charger improperly may cause serious damage to the device.

Any damage caused by misuse is not covered by the warranty. Use only Leica-

approved chargers, batteries, and cables. Unapproved chargers or cables can

cause the battery to explode or damage the device.

3.2 Charging the Battery

3.2.1 Charging the Battery by USB Port on Device

☞Charge the battery when the battery icon in the status bar is ashing

or before the rst use.

1. Open the lid (a) and plug the cable into the port of the device (b).

2. Plug the end of the USB-C cable into one of the provided adaptors.

Select the appropriate adapter for your country.

First-time use/

charging batteries

Operation/discharging

Charging the battery

by USB-C port on

device

Batteries 7

☞The device can also be charged connecting the USB-C cable to the

computer, but takes more time. If the device is connected to the

computer through USB cable, you can download and upload data.

3.2.2 Charging the Battery by USB Charger (Optional)

1. Move the slider (b) from left to right and remove the battery cover

(a).

2. Pull the plastic strip and remove the battery (c).

☞Do not remove the plastic strip from the battery (c).

3. Place the battery (c) in the charger (d).

4. Plug the USB cable into the port (e) of the charger (d).

5. Plug the USB cable into a power source.

☞Charging is nished when the indicator light (f) turns green.

1. Remove the battery (d) from the charger (a).

2. Place the battery (d), bottom rst in the BLK3D.

☞Make sure that the battery (d) and the plastic strip are in the correct

position.

3. Install the battery cover (e) top rst on the BLK3D.

Charging with battery

charger

Install battery back in

device

8 Batteries

☞Make sure that the battery cover (e) and the slider (f) are in the cor-

rect position.

Batteries 9

4 Power Functions

Switching ON

Press the ON/OFF button (a) to switch the device on.

Switching OFF

Press and hold the ON/OFF button (a) for at least two seconds to

switch the device off.

Switching ON/OFF

10 Power Functions

Autres manuels pour BLK3D

Table des matières

Autres manuels Leica Geosystems Instrument de mesure

Leica Geosystems

Leica Geosystems Viva TPS Manuel utilisateur

Leica Geosystems

Leica Geosystems DISTO A2 Manuel utilisateur

Leica Geosystems

Leica Geosystems DISTO D810 Manuel utilisateur

Leica Geosystems

Leica Geosystems iCON iCR70 Manuel utilisateur

Leica Geosystems

Leica Geosystems iCON iCT30 Manuel utilisateur

Leica Geosystems

Leica Geosystems DISTO S910 Manuel utilisateur

Leica Geosystems

Leica Geosystems TPS700 Series Manuel utilisateur

Leica Geosystems

Leica Geosystems iCON gps 30 Manuel utilisateur

Leica Geosystems

Leica Geosystems DISTO WH15 Manuel du produit

Leica Geosystems

Leica Geosystems DISTO E7100i Manuel utilisateur

Leica Geosystems

Leica Geosystems RoadRunner Manuel du produit

Leica Geosystems

Leica Geosystems Rugby 640G Manuel utilisateur

Leica Geosystems

Leica Geosystems Rod Eve 140 Manuel utilisateur

Leica Geosystems

Leica Geosystems DISTO D810 touch Manuel utilisateur

Leica Geosystems

Leica Geosystems DD Series Manuel utilisateur

Leica Geosystems

Leica Geosystems Builder Series Guide de l'administrateur

Leica Geosystems

Leica Geosystems DISTO D810 Manuel utilisateur

Leica Geosystems

Leica Geosystems Rugby 840 Manuel utilisateur

Leica Geosystems

Leica Geosystems Rugby 640 Manuel utilisateur

Leica Geosystems

Leica Geosystems DISTO S910 Manuel utilisateur

Leica Geosystems

Leica Geosystems DNA03 Series Manuel utilisateur

Leica Geosystems

Leica Geosystems BLK360 Manuel utilisateur

Leica Geosystems

Leica Geosystems Roteo 20HV Manuel utilisateur

Leica Geosystems

Leica Geosystems Disto D410 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur