LEGRAND PRO 21 7756 36 Manuel utilisateur

PRO 21™

No neutral switch

7756 36

Characteristics

Incandescent lamp

Halogen lamp

ELV halogen lamp with ferromagnetic or electronic



N0064HA4/00

110 V Min. 60 W 60 W 60 VA

Max. 150 W 150 W 150 VA

230 V Min. 60 W 60 W 60 VA

Max. 300 W 300 W 300 VA

Important :

Ferromagnetic transformers must be charged to more

than 60% of their nominal power.

Take account of the efficiency of the ferromagnetic

transformers when calculating the permissible power.

(eg. transformer for a 50 W bulb with efficiency of 0.78

=> actual power consumed by the transformer = 64 VA)

Connection

Voltage 100 - 240 V AC

Frequency 50 - 60 Hz

2 x 1,5 mm2

Depth = 40 mm min.

Radio frequency 868.3 MHz

Range about 200 m, in free field

+ 5°C to + 45°C

Characteristics

Important :

A load must be

connected

before starting

product learning

in a scenario.

ON / OFF

Description

LEARN indicator light

Control

buttons

Identification No.

LEARN button

Communication media

RF => Radio Frequency

Factory settings

On first powering up, pressing the

buttons ON or OFF controls the

lighting point connected to the cut

phase terminal.

Pressing LEARN twice cancels this

general control function.

Operation

The no neutral switch controls the load that is connected to its cut phase terminal ($) using the ON or OFF buttons, or fol-

lowing a command received from a Leader (transmitter) product that it was linked to during the learning(1) of a scenario(2).

It is then the Actor (receiver) of a scenario and can take part in a maximum of 16 scenarios.

It can also command radio products through the RF/PLC interface Cat. No.036 06.

(1) Learn phase :Operation to associate products so that they can be controlled simultaneously from a central point.

This association is carried out by applying the learn scenario procedure on page 5

(2) Scenario :Corresponds to the set of products (actors) that are associated with a command key.







Learn scenario

Key

The indicator lamp

goes off

Press LEARN Press the command key that is to

control the scenario

Press LEARN

Press the command key that is to be

associated with the leader

The indicator lamps of all the products go off.

The scenario is recorded.

Step 1 : Start the learn phase (on the LEADER)

Step 2 : Add an actor to the scenario (on the ACTOR)

Step 3 : Record the scenario (on the LEADER)

To add a number of products to the scenario, repeat operations and for each actor.

The indicator lamp

blinks slowly

The indicator lamp

blinks quickly

The indicator lamp

flashes









Modification of a scenario

Press LEARN Press the command key

that controls the scenario

The indicator lamps of all the product

in the scenario blink.

Press the command key

that is to be associated

Step 1: Open the scenario (on the LEADER)

Press LEARN

To remove the product from the

scenario, go to step 3

Step 2 : Modify the state of an actor in the scenario (on the ACTOR)

Step 3 : Record the scenario (on the LEADER)

Press LEARN

The indicator lamps of all the products go off.

The scenario is recorded.



Clearing a scenario

Press LEARN

The scenario is cleared

Press the command key

and hold it down for 10 s

Clear all the scenarios linked with the command key (on the LEADER)

Press LEARN

Return the product to

factory configuration

Press LEARN and hold

down for 10 s

Clear all the scenarios linked to this product (on the LEADER)

5 s

DECLARATION DE CONFORMITE

Nous déclarons que les produits satisfont aux dispositions de :

We declare that the products satisfy the provisions of

La Directive 1999/5/CE du Parlement européen

et du Conseil du 9 mars 1999 "R&TTE"

sous réserve d'une utilisation conforme à sa destination

on condition that they are used in the manne

et/ou d'une installation conforme aux normes en vigueur

intended and/or in accordance with the curren

et/ou aux recommandations du constructeur

installation standards and/or with the manufacturer'

recommandantion

Ces dispositions sont assurées pour la directive 1999/5/CEE par la conformité aux normes suivantes :

These provisions are ensured for directive 1999/5/CEE by conformity to the following standards

EN 300220-3

EN 55022

EN 60669-2-1

PRO 21™

Funk- Schalter ohne Neutralleiter

7756 36

Technische Daten

Glühlampe

Hochvolt Halogenlampe

Niedervolthalogenlampen mit konventionellem trafo



110 V Min. 60 W 60 W 60 VA

Max. 150 W 150 W 150 VA

230 V Min. 60 W 60 W 60 VA

Max. 300 W 300 W 300 VA

Wichtig :

Die Last der elektronischen Trafos muss mehr als 60 %

ihrer Nennleistung betragen.

Bei der Berechnung der zulässigen Höchstlast muss

der Wirkungsgrad der elektronischen Trafos berück-

sichtigt werden.

(Beispiel: Trafo für eine Lampe mit 50 W mit einem

Wirkungsgrad von 0,78 => effektive Leistungsaufnahme

des Trafos = 64 VA)

Hinweis :

El. Trafos haben in der Regel einen Wirkungsgrad nahe

1 (0,98). Daher ist diese Berechnung in vielen Fällen

nur bei gewickelten Trafos erforderlich.

Anschluss

Spannung 100 - 240 VA

Frequenz 50 - 60 Hz

2 x 1,5 mm2

Einbautiefe = min. 40 mm

Funkfrequenz 868.3 MHz

Reichweite ca. 200 m ohne Hindernisse

+ 5°C bis + 45°C

Technische Daten

Wichtig :

Vor dem Einlernen

des Gerätes muss

eine Last ange-

schlossen werden.

Table des matières

Langues :

Autres manuels LEGRAND Changer

LEGRAND

LEGRAND Qmotion QIS Manuel d'installation

LEGRAND

LEGRAND Celiane CB9050 Manuel utilisateur

LEGRAND

LEGRAND Arteor 5 722 69 Manuel utilisateur

LEGRAND

LEGRAND Luxul AV Series Manuel utilisateur

LEGRAND

LEGRAND 7 521 83 Manuel utilisateur

LEGRAND

LEGRAND Raritan MasterConsole MCD-104-DUAL Manuel utilisateur

LEGRAND

LEGRAND 5 743 12 Manuel utilisateur

LEGRAND

LEGRAND HPM Vivo EVM970L Series Manuel utilisateur

LEGRAND

LEGRAND 0 883 26 Manuel utilisateur

LEGRAND

LEGRAND 496 05 Manuel utilisateur

LEGRAND

LEGRAND 0 672 23 Manuel utilisateur

LEGRAND

LEGRAND Belanko 6 171 00 Manuel utilisateur

LEGRAND

LEGRAND Arteor 5 746 05 Manuel utilisateur

LEGRAND

LEGRAND PRO 21 7756 11 Manuel utilisateur

LEGRAND

LEGRAND Plexo 0 698 74L Manuel utilisateur

LEGRAND

LEGRAND WattStopper UW-100 Manuel utilisateur

LEGRAND

LEGRAND In One Sagane 845 42 Manuel utilisateur

LEGRAND

LEGRAND HKRL20 Manuel utilisateur

LEGRAND

LEGRAND Watt Stopper RS-100U Manuel utilisateur

LEGRAND

LEGRAND VANTAGE CIS10-DIN Manuel utilisateur

LEGRAND

LEGRAND Valena Life Mode d’emploi

LEGRAND

LEGRAND 0 784 61L Manuel utilisateur

LEGRAND

LEGRAND DPX3 160 Manuel utilisateur

LEGRAND

LEGRAND Wattstopper LMSW-105 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur