LEGRAND PRO 21 7756 27 Manuel utilisateur
PRO 21™
The centralized radio shutter switch
7756 27
Characteristics
110 V 1 x 270 VA
230 V 1 x 500 VA
Note : An individual controller controls one rollershutter or
awning only.
N0064HB2/00
Voltage 100 - 240 V AC
Frequency 50 - 60 Hz
2 x 2,5 mm2
Depth = 40 mm min.
Radio frequency 868.3 MHz
Range about 200 m, in free field
+ 5°C to + 45°C
2
L
N
Connection
3
Description
LEARN indicator light
Control buttons
Identification No.
LEARN button
Communication media
RF => Radio Frequency
Factory settings
On first powering up,pressing the
Up - Stop - Down buttons controls
the shutter connected to its termi-
nals.Pressing the LEARN button
ofthe transmitter or receiver cancels
this functionality.
4
Operation
The individual radio shutter switch controls the shutter or blind connected to its terminals,using the Up - Stop - Down but-
tons or following a command received from a Leader product (transmitter) that it was linked to during the learning(1) of a
scenario(2).
It is then the actor (receiver) of a scenario and can take part in a maximum of 16 different scenarios.
It can also be controlled by a mains borne signalling product by using the RF/PLC interface, Cat.No.036 06
(1) Learning : action oflinking products to be controlled simultaneously from a central point.This linking is performed by
applying the scenario learning procedure on page 5.
(2) Scenario : corresponds to all the actors that are linked to a control button.
5
Learn scenario
Key
The indicator lamp
goes off
Press LEARN Press the command key that is to
control the scenario
Press LEARN
Press LEARN
Press the command key that is to be
associated with the leader
The indicator lamps of all the products go off.
The scenario is recorded.
Step 1 : Start the learn phase (on the LEADER)
Step 2 : Add an actor to the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)
To add a number of products to the scenario, repeat operations and for each actor.
The indicator lamp
blinks slowly
The indicator lamp
blinks quickly
The indicator lamp
flashes
6
Modification of a scenario
Press LEARN Press the command key
that controls the scenario
The indicator lamps of all the product
in the scenario blink.
Press the command key
that is to be associated
Step 1: Open the scenario (on the LEADER)
Press LEARN
or
Press LEARN
To remove the product from the
scenario, go to step 3
Step 2 : Modify the state of an actor in the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)
Press LEARN
The indicator lamps of all the products go off.
The scenario is recorded.
7
Clearing a scenario
Press LEARN
The scenario is cleared
Press the command key
and hold it down for 10 s
Clear all the scenarios linked with the command key (on the LEADER)
Press LEARN
Return the product to
factory configuration
Press LEARN and hold
down for 10 s
Clear all the scenarios linked to this product (on the LEADER)
5 s
5 s
8
DECLARATION DE CONFORMITE
Nous déclarons que les produits satisfont aux dispositions de :
We declare that the products satisfy the provisions of
:
La Directive 1999/5/CE du Parlement européen
et du Conseil du 9 mars 1999 "R&TTE"
sous réserve d'une utilisation conforme à sa destination on condition that they are used in the manner
et/ou d'une installation conforme aux normes en vigueu
r
intended and/or in accordance with the current
et/ou aux recommandations du constructeu
r
installation standards and/or with the manufacturer's
recommandantions
Ces dispositions sont assurées pour la directive 1999/5/CEE par la conformité aux normes suivantes :
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards :
EN 300220-3
EN 55022
EN 60669-2-1
9
PRO 21™
Funk-Einzel- Jalousie-/ Rollladenschalter
7756 27
Technische Daten
110 V 1 x 270 VA
230 V 1 x 500 VA
Hinweis : Der Einzel- Rollladenschalter steuert nur einen
Antriebsmotor. (Parallelschaltung mehrerer Antriebe ist unzu-
lässig)
Spannung 100 - 240 V AC
Frequenz 50 - 60 Hz
2 x 2,5 mm2
Einbautiefe = min. 40 mm
Funkfrequenz 868.3 MHz
Reichweite ca. 200 m freies Feld
+ 5°C bis + 45°C
10
L
N
Anschluss
Table des matières
Langues :
Autres manuels LEGRAND Changer
LEGRAND
LEGRAND MOSAIC Series Manuel utilisateur
LEGRAND
LEGRAND 784 47 Manuel utilisateur
LEGRAND
LEGRAND 488 09 Manuel utilisateur
LEGRAND
LEGRAND radiant RCD113 Manuel utilisateur
LEGRAND
LEGRAND In One Sagane 845 42 Manuel utilisateur
LEGRAND
LEGRAND EM357 Manuel utilisateur
LEGRAND
LEGRAND Celiane 673 23 Manuel utilisateur
LEGRAND
LEGRAND 7 521 84 Manuel utilisateur
LEGRAND
LEGRAND 0 488 07 Manuel utilisateur
LEGRAND
LEGRAND radiant LC2201 Manuel utilisateur
LEGRAND
LEGRAND Qmotion QIS Manuel d'installation
LEGRAND
LEGRAND LIMOGES Cedex 87045 Manuel utilisateur
LEGRAND
LEGRAND Niloe LE-764507 Manuel utilisateur
LEGRAND
LEGRAND LEXIC 037 23 Manuel utilisateur
LEGRAND
LEGRAND Pass & Seymour RRW600V Manuel utilisateur
LEGRAND
LEGRAND 695 00 Manuel utilisateur
LEGRAND
LEGRAND DA1458 Manuel utilisateur
LEGRAND
LEGRAND 779 20 Manuel utilisateur
LEGRAND
LEGRAND Mosaic 0 770 30 Manuel utilisateur
LEGRAND
LEGRAND Arteor 5 746 05 Manuel utilisateur
