LEGRAND VADDIO HuddleSHOT Remote Manuel utilisateur

Document Number 411-0037-41 Rev A – August 2022

User Guide for the

HuddleSHOT Remote

August 2022

The remote provides basic in-conference functionality – zoom, volume control, and muting.

You can also use it to get the camera's IP address.

Before you can use the remote, you will need to:

nInstall the batteries

nPair the remote with the camera

Installing the Batteries

The remote uses two AAA batteries.

1. Remove the cover from the back of the remote. You may need to press down on the upper

edge while sliding it off.

2. Install the batteries as shown in the diagram in the battery opening.

3. Slide and snap the cover back into place.

Pairing the Remote to the Camera

The camera does not recognize or respond to the remote until they are paired. Do this after the camera is

turned on and its indicator light is white.

If you do not have access to the administrative web interface:

1. Press and hold the multifunction button on the back of the camera until the indicator light blinks cyan.

2. While the indicator light blinks cyan, press the pairing button on the remote. The camera's indicator

light changes to steady white when the pairing is complete. You may need to press the remote's

pairing button more than once.

3. If the indicator light changes from blinking cyan to blinking blue, this indicates a pairing error: The

pairing was not successful and pairing mode has timed out. Go back to step 1. If the problem persists,

contact Vaddio Technical Support.

Note

Any time a pairing error occurs (indicator blinking blue), Vaddio recommends rebooting the camera as

soon as feasible. If pairing was successful, the remote remains paired through the reboot process.

If you have access to the administrative web interface:

1. On the Pairing page of the web interface, select Pair Remote.

2. When the camera's indicator light blinks cyan, press and hold the pairing button on the remote until

the camera's indicator light changes to steady white.

Vaddio is a brand of Legrand AV Inc.· www.legrandav.com · Phone 800.572.2011 / +1.763.971.4400 ·

Fax +1.763.971.4464 · Email [email protected]·

Vaddio is a registered trademark of Legrand AV Inc. All other brand names or marks are used for

identification purposes and are trademarks of their respective owners. All patents are protected under

existing designations. Other patents pending.

HuddleSHOT Remote Quick Reference

Power button and indicator – Set the camera to standby mode, or

return to full-power mode.

Mute button – Mute connected or built-in microphone(s).

Home button – Returns the camera to its stored color settings.

Arrow buttons – These buttons have no function on HuddleSHOT

cameras, so they're great for fidgeting.

Zoom + and – buttons – Zoom in (+) or out (–).

The camera provides three zoom levels: 1x, 1.5x, and 2x.

Volume +/– buttons – Increase or decrease the volume from the

speaker.

Pairing button – Use when pairing the remote with the camera.

Note: On some remotes, this button is marked differently.

Network button – Display the camera's IP address on the video output.

Other Things to Know About the Remote

Here are some common situations in which the remote can behave in ways you don't expect.

nEnvironments with RF-controlled cameras in adjacent rooms – If the remote is currently paired

to a camera and within range of that camera, it will not pair with another camera.

nThe remote goes to standby mode after a brief period of inactivity. Press a button to wake it up.

nThe remote is no longer paired after restoring the camera's factory defaults. If you restore

factory defaults on the camera, pair it with the remote again.

Unpairing the Remote

If you need to unpair the remote from the camera that currently recognizes it, you will need to log in to the

camera's web interface as admin. On the Pairing page, select Forget Remote.

User Guide for the HuddleSHOT Remote

Table des matières

Autres manuels LEGRAND Télécommande

LEGRAND

LEGRAND Qmotion QDR2 Manuel utilisateur

LEGRAND

LEGRAND 0 672 64 Manuel utilisateur

LEGRAND

LEGRAND In One 882 00 Manuel utilisateur

LEGRAND

LEGRAND FB Advanced Manuel utilisateur

LEGRAND

LEGRAND Qmotion QDR2 Manuel utilisateur

LEGRAND

LEGRAND 882 32 Manuel utilisateur

LEGRAND

LEGRAND 0 882 32 Manuel utilisateur

LEGRAND

LEGRAND Vaddio RF Manuel utilisateur

LEGRAND

LEGRAND Wattstopper LMRH-101 Manuel utilisateur

LEGRAND

LEGRAND 348220 Manuel utilisateur

LEGRAND

LEGRAND Pass & Seymour LightSense PSWRR Manuel utilisateur

LEGRAND

LEGRAND DPX 250 Manuel utilisateur

LEGRAND

LEGRAND 5 738 70 Manuel utilisateur

LEGRAND

LEGRAND MKFOB v2 Manuel utilisateur

LEGRAND

LEGRAND 882 32 Manuel utilisateur

LEGRAND

LEGRAND QMotion Manuel d'installation

LEGRAND

LEGRAND 067695 Manuel utilisateur

LEGRAND

LEGRAND Wattstopper LMRH-105 Manuel utilisateur

LEGRAND

LEGRAND FSIR-100 Instructions d'utilisation et d'installation

LEGRAND

LEGRAND DPX 250 Manuel utilisateur

LEGRAND

LEGRAND DPX 1250 Manuel utilisateur

LEGRAND

LEGRAND DPX 400 Fiche technique

LEGRAND

LEGRAND RCFREMOTE Manuel utilisateur

LEGRAND

LEGRAND FB Advanced Manuel d'instructions

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation